Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- Neoflon FEP ND - 4GYHR is a water based FEP topcoat.
- It makes a gray topcoat layer displaying non stick property.
Properties
- Physical Form
- Characteristics
- Characteristics of Coating Film
- Note
1. The coating film was evaluated with a test piece below.
- Substrate: Aluminum plate roughened with Tosa Emely Extra #80/#100=50/50
- Primer: EK 1909S21R, approximately 10μm thick
- Topcoat: Approximately 20μm thick
2. The above values in properties are typical and not guaranteed.
Value | Units | Test Method / Conditions | |
Film Appearance | Gray | — | — |
pH | 8 | — | — |
Solid Content | 39 | mass% | — |
Viscosity | 700 | cP | — |
Value | Units | Test Method / Conditions | |
Contact Angle (Hexadecane, at 25°C) | 50 - 53 | Degree | Contact Angle Meter |
Contact Angle (Water, at 25°C) | 105 - 108 | Degree | Contact Angle Meter |
Cross Cut Adhesion (Stripping with cellophane tape,10 times) | 100/100 | — | JIS K5400 8.5 |
Pencil Hardness (at 25°C, Stripping hardness of base material) | H - 2H | — | JIS K6894 |
Safety & Health
- Handling Method / Safety Information
- Be sure to read the notes on SDS and labels before use.
- This product is intended for general industry, and therefore its adequacy and safety as a raw material for medical purposes cannot be guaranteed.