Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
- Product Highlights
- Neoflon FEP NP-20 is a copolymer of tetrafluoroethylene and hexafluoropropylene.
- Quite similar properties as PTFE. Chemical, electrical and mechanical properties.
- Continuous service temperature is 200°C.
- Typical applications are wire and cable insulation, tubing, and film by extrusion process.
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
- Rubbers ; SBR, NBR,EPDM,FKM,CR,ACM, etc.
- Thermosetting Resins ; Epoxy, Unsaturated polyester, Phenol, etc.
- Thermoplastics ; PE, PP, PVC, ABS, etc.
Properties
- Color
- Physical Form
- Physical Properties
- Note
* The above numeric values are representative and not guaranteed.
- Note
*¹ The above values are representative and not guaranteed.
Value | Units | Test Method / Conditions | |
Elongation | 30 | % | ASTM D 638 |
Melting Point | 270 | °C | ASTM D2116 |
MFR | 6 | g/10min | ASTM D 2116 |
Specific Gravity | 2.15 | — | ASTM D 792 |
Tensile Strength | 26 | MPa | ASTM D 638 |
Technical Details & Test Data
- Method of use
How to apply
- Shake the can well, hold it about 20‐30cm away from the mold, and then spray lightly so that a thin uniform film is formed.
- Before using the product for the first time, remove the old release agent completely.
- Use the steps in ‘(2) Cleaning the mold’ below to clean correctly.
Cleaning the mold
- Slight contamination of the mold release agent can usually be removed to a certain degree by wiping with a solvent (IPA, toluene, acetone).
- Alkaline cleaning agents are effective for complete removal. (Immerse in an approx.
- 10% aqueous solution of potassium hydroxide or sodium hydroxide to which a small amount of surfactant has been added. The cleaning solution should be at a temperature of 60‐80°C)
Use temperature range
From room temperature to 200°C
Safety & Health
- Handling Method / Safety Information
- Be sure to read the notes on SDS and labels before use.
- This product is intended for general industry, and therefore its adequacy and safety as a raw material for medical purposes cannot be guaranteed.
- Handling Method / Safety Information
- Be sure to read the Safety Data Sheet (SDS) and precautions on the label before using.
- This product has been developed for industrial purposes and we shall not guarantee the the safety if used for any other purposes. If it is going to be used for medical or food applications, please contact us in advice.
Packaging & Availability
- Packing Specification
20 cans / 1 carton
- Packing Specification
25 Kg