Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Product Highlights
- NEOFLON PFA AD - 2 grade is a water based PFA topcoat.
- NEOFLON PFA AD - 2CRER makes a clear topcoat layer displaying non stick property.
- It makes a pinhole free film.
Properties
- Physical Form
- Characteristics
- Characteristics of Coating Film
- Note
1. The coating film was evaluated with a test piece below.
- Substrate: Aluminum plate roughened with Tosa Emely Extra #80/#100=50/50
- Primer: EK 1909S21R, approximately 10μm thick
- Topcoat: Approximately 10 ~ 15μm thick
2. The above values in properties are typical and not guaranteed.
Value | Units | Test Method / Conditions | |
Film Appearance | Clear | — | — |
pH | 9 | — | — |
Solid Content | 50 | mass% | — |
Viscosity | 220 | cP | — |
Value | Units | Test Method / Conditions | |
Contact Angle (Hexadecane, at 25°C) | 50 - 56 | Degree | Contact Angle Meter |
Contact Angle (Water, at 25°C) | 110 - 116 | Degree | Contact Angle Meter |
Cross Cut Adhesion (Stripping with cellophane tape,10 times) | 100/100 | — | JIS K5400 8.5 |
Pencil Hardness (at 25°C, Stripping hardness of base material) | H - 3H | — | JIS K6894 |
Safety & Health
- Handling Method / Safety Information
- Be sure to read the notes on SDS and labels before use.
- This product is intended for general industry, and therefore its adequacy and safety as a raw material for medical purposes cannot be guaranteed.