Neoflon PFA AP-211SH

Identification & Functionality

Chemical Family

Fluoropolymers

Polymer Name

Perfluoroalkoxy Polymer (PFA)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

High Performance Thermoplastics

Features & Benefits

Materials Features

Chemical Resistant,

Excellent Melt Flow,

Good Environmental Stress Crack Resistance (ESCR),

Good Weather Stability,

High Purity,

High Temperature Strength,

Low Temperature Strength,

Non-Flammable,

Odorless,

Very Good Heat Resistance

Product Benefits

• Good melt flowability while maintaining excellent properties of PTFE. It can be used for melt molding as a thermoplastic resin. Injection molding and extrusion molding are suitable.
• Excellent in melt flowability. Applicable for injection molded products. It has been used for injection molded parts for semiconductors such as fitting nuts.
• Less eluted fluoride ions. Due to the fluorinated terminal group.
• The most excellent stress crack resistance in injection molding grade of PFA.
• Excellent chemical resistance which is not affected by most of the chemicals.
• Flexible and tough under the cryogenic to high temperature.
• Excellent heat resistance. Continuous use temperature is 260 °C°C.
• Nonflammable like Polyflon PTFE and Neoflon FEP.
• Excellent weather resistance. No properties change even when exposed outside for a long time.

Applications & Uses

Markets

Electrical & Electronics,

Printing & Packaging

Applications

Printing & Packaging — Packaging

Industrial & Transport Packaging

Electrical & Electronics — Parts & Components

Housings & Enclosures,

Semiconductor Manufacturing

Electrical & Electronics — Wire & Cable

Jacketing & Insulation

Plastics & Elastomers End Uses

Bottles,

Cables,

Fittings,

Gaskets,

Housings,

Industrial Tanks,

Semiconductor Applications,

Shipping Containers,

Tubes,

Wires

Plastics & Elastomers Processing Methods

Extrusion,

Injection Molding

Properties

Color

White

Physical Form

Pellets,

Solid

Physical Properties

	Value	Units	Test Method / Conditions
Elongation	410	%	ASTM D 1708 Compliant
Melting Point	303	℃	DSC
MFR (at 372℃, 5kgf)	14	g/10min	—
Specific Gravity	2.14	—	ASTM D 792 Compliant
Tensile Strength	35	MPa	ASTM D 1708 Compliant

Note

The above values are representative values, not guaranteed values.

Safety & Health

Handling Method / Safety Information

• Be sure to read the notes on SDS and labels before use.
• This product is intended for general industry, and therefore its adequacy and safety as a raw material for medical purposes cannot be guaranteed.

Packaging & Availability

Packing Specification

25 Kg

Product Highlights

• Good melt flowability while maintaining excellent properties of PTFE. It can be used for melt molding as a thermoplastic resin. Injection molding and extrusion molding are suitable.
• Excellent in melt flowability. Applicable for injection molded products. It has been used for injection molded parts for semiconductors such as fitting nuts.
• Less eluted fluoride ions. Due to the fluorinated terminal group.
• The most excellent stress crack resistance in injection molding grade of PFA.
• Excellent chemical resistance which is not affected by most of the chemicals.
• Flexible and tough under the cryogenic to high temperature.
• Excellent heat resistance. Continuous use temperature is 260 °C°C.
• Nonflammable like Polyflon PTFE and Neoflon FEP.
• Excellent weather resistance. No properties change even when exposed outside for a long time.