Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
- Product Highlights
- AP - 230AS is a copolymer of tetrafluoroethylene and perfluoroalkyl vinyl ether.
- It is a PFA with conductivity.
- Good melt flowability while maintaining excellent properties of PTFE. It can be melt molded as a thermoplastic resin by extrusion molding, transfer molding, compression molding and the like.
- Especially, it is used for thin walled tubes for copy rolls by extrusion molding.
- Excellent chemical resistance which is not affected by most of the chemicals.
- It can also be adopted to conductive valve lining applications.
- It retains flexibility without losing toughness under the environment from cryogenic to high temperature.
- No change in the resistance value up to 200 ℃.
- Non stickiness. It shows excellent releasability and water repellency / oil repellency.
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Physical Properties
- Note
The above values in properties are representative and not guaranteed.
| Value | Units | Test Method / Conditions | |
| Elongation | 260 | % | ASTM D 1708 Compliant |
| Melting Point | 300 | ℃ | DSC |
| MFR (at 372℃, 5kgf) | 1.9 | g/10min | — |
| Tensile Strength | 35 | MPa | ASTM D 1708 Compliant |
| Volume Resistivity | 7.5 x 10¹² | Ω･cm | ASTM D257 Compliant |
Safety & Health
- Handling Method / Safety Information
- Be sure to read the notes on SDS and labels before use.
- This product is intended for general industry, and therefore its adequacy and safety as a raw material for medical purposes cannot be guaranteed.
Packaging & Availability
- Packing Specification
50Kg