Endcor

Endcor® 400 Wash Primer is a vinyl metal conditioner that eliminates the need for wash-off types of phosphoric acid pre-treatments and additional temporary “shop” coats. Endcor 400 Wash Primer --Low Flash meets U.S. Specification MIL-C-15328B Coating Pre-treatment (Formula 117 for Metals). Endcor 400 may be applied to moist or wet metal, and even under these conditions will dry within one-half hour to permit immediate application of finish coatings.

Endcor® 460 is a water-borne copolymer that is designed for application to rusted ferrous metal surfaces. When properly applied the coating converts the rusted surface to a dark, stable organic iron compound. This product has a low permeability factor and is impermeable to oxygen and moisture while providing a rust-free surface ready for priming or finish painting It converts and primes rusted surfaces in one operation; dries to a hard, gloss finish combines excellent flexibility, toughness and impact resistance.

Endcor® 4600C series coating is a two component, semi-gloss high-performance coating based on a chemically cross-linked polyurethane polymer. Endcor 4600C exhibits outstanding toughness, durability, chemical and weather resistance with increased gloss and color retention as compared to acrylic urethanes. Endcor 4600C provides an attractive appearance for metal and concrete surfaces exposed to corrosive chemical, industrial and marine environments.

Endcor® 560C is a multipurpose alkyd primer used for new construction and maintenance applications. It can be applied over a wide range of coated and uncoated surfaces without lifting or softening the existing coating. An economical rust inhibitive primer for exterior and interior steel surfaces subjected to industrial and marine environments. It exhibits strong intercoat adhesion, serving as an outstanding tie coat between previously applied adherent paint and chemically resistant topcoat systems containing active solvents.