Products

Endcor® 460 is a water-borne copolymer that is designed for application to rusted ferrous metal surfaces. When properly applied the coating converts the rusted surface to a dark, stable organic iron compound. This product has a low permeability factor and is impermeable to oxygen and moisture while providing a rust-free surface ready for priming or finish painting It converts and primes rusted surfaces in one operation; dries to a hard, gloss finish combines excellent flexibility, toughness and impact resistance.

Elastoid™ 1300 is a single-package, high-build, elastomeric coating and vapor barrier. It is formulated from multiphase synthetic rubber copolymers which interact to provide an unusual range of desirable chemical and physical properties. It is tough, flexible, and corrosion-resistant and provides heavy-duty, long-term protection in highly aggressive chemical, industrial and marine environments. It has extremely low gas, water and water vapor permeability, and exhibits one of the lowest water vapor transmission rates possible with an elastomeric system. It is virtually unaffected by water immersion.

Endcor® 4600C series coating is a two component, semi-gloss high-performance coating based on a chemically cross-linked polyurethane polymer. Endcor 4600C exhibits outstanding toughness, durability, chemical and weather resistance with increased gloss and color retention as compared to acrylic urethanes. Endcor 4600C provides an attractive appearance for metal and concrete surfaces exposed to corrosive chemical, industrial and marine environments.

Thurmalox® 884-080 Green is a heat-resistant modified silicone coating designed primarily for temperature indicating applications requiring a single stage irreversible color change. When applied to refinery and petrochemical process equipment which operate at elevated temperatures the color change provided by Thurmalox 884-080 indicates vessel overheating due to failure of refractory linings, system malfunction or bypassing of hot gasses. Thurmalox 884-080 is suitable for maximum continuous operating temperatures up to 450°F (232°C).

Thurmalox® 884-083 Green is a heat-resistant modified silicone coating designed primarily for temperature indicating applications requiring a two stage irreversible color change. When applied to refinery and petrochemical process equipment which operate at elevated temperatures the color change provided by Thurmalox 884-083 indicates vessel overheating due to failure of refractory linings, system malfunction or bypassing of hot gasses. Thurmalox 884-083 is suitable for maximum continuous operating temperatures up to 350°F (177°C).

Thurmalox® 884-082 Green is a heat-resistant modified silicone coating designed primarily for temperature indicating applications requiring a two-stage irreversible color change. When applied to refinery and petrochemical process equipment which operate at elevated temperatures the color change provided by Thurmalox 884-082 indicates vessel overheating due to failure of refractory linings, system malfunction or bypassing of hot gasses. Thurmalox 884-082 is suitable for maximum continuous operating temperatures up to 300°F (149°C).

Thurmalox® 884-050 Red is A heat-resistant modified silicone coating designed primarily for temperature indicating applications requiring a single stage irreversible color change. When applied to refinery and petrochemical process equipment which operate at elevated temperatures the color change provided by Thurmalox 884-050 indicates vessel overheating due to failure of refractory linings, system malfunction or bypassing of hot gasses. Thurmalox 884-080 is suitable for maximum continuous operating temperatures up to 250°F (121°C).

Endcor® 560C is a multipurpose alkyd primer used for new construction and maintenance applications. It can be applied over a wide range of coated and uncoated surfaces without lifting or softening the existing coating. An economical rust inhibitive primer for exterior and interior steel surfaces subjected to industrial and marine environments. It exhibits strong intercoat adhesion, serving as an outstanding tie coat between previously applied adherent paint and chemically resistant topcoat systems containing active solvents.

Thurmalox® 884-090 Blue is a heat-resistant modified silicone coating designed primarily for temperature indicating applications requiring a single stage irreversible color change. When applied to refinery and petrochemical process equipment which operate at elevated temperatures the color change provided by Thurmalox 884-090 indicates vessel overheating due to failure of refractory linings, system malfunction or bypassing of hot gasses. Thurmalox 884-090 is suitable for maximum continuous operating temperatures up to 500°F (260°C).