Products

DCL 1177 Anthraquinone Red, PR.177 is a transparent, non-warping, blue-shaded red with excellent fastness properties. It is FDA-approved (Section 178.3297) and can be used in a variety of plastics, including polyolefins and PVC, as well as PET, ABS, rubber, and styrene. Additionally, it is suitable for general industrial coatings and automotive applications.

DCL 2316 Dianisidine Orange, PO.16 is a bright yellow shade orange with good opacity and tinting strength mainly for interior applications. This pigment is mainly used in the following applications: Plastics such as PVC and PE Powder and industrial coatings. Solvent flexo, water flexo and UV inks Rubber products

DCL RC-800-PG Rutile Titanium, PW.6 (Chloride) is a low oil absorption, chloride-process rutile titanium dioxide pigment, surface-treated with alumina and silica. It offers excellent tint strength and dispersibility, providing a bluish/white high dispersion product, and is approved for use under 21 CFR 178.3297 by the FDA.

DCL 2111 Isoindolinone Yellow, PY.110 is a semi-opaque, red shade yellow pigment with excellent lightfastness and heat stability. It is FDA-approved (Section 178.3297) and exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a range of coating, plastic, ink and rubber applications.

DCL Tan 221 Zinc Ferrite, PY.119 is a yellow pigment, primarily utilized in plastics due to its temperature stability up to 500°F. DCL Tan 221 Zinc Ferrite, PY.119 has excellent lightfastness and chemical stability. It is also recommended to be used in industrial and powder coating applications.

DCL 2110 Isoindolinone Yellow, PY.110 is a transparent, red shade yellow pigment with excellent lightfastness and good heat stability. 2110 Isoindolinone Yellow, PY.110 is slightly more transparent and redder than 2111. This product is also approved by the FDA under section 178.3297.

DCL 8045 Buff Rutile Titanium Dioxide, PW.6 is a buff-colored (tan) rutile grade that offers comparable performance characteristics, such as opacity, to white TiO2. It can reduce the amount of some organic and other inorganic pigments, as well as some white TiO2 in selected formulations.

DCL 2870 Naphthol Red, PR.170 is a blue-shaded red pigment for use where good overall fastness properties are required. It exhibits good overall resistance properties, including lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of paint, plastic, and ink applications.

DCL 2181 Benzimidazolone Yellow, PY.181 is a red-shaded, non-warping yellow pigment that exhibits excellent lightfastness and resistance properties along with heat stability. This pigment is mainly recommended for a variety of plastic applications and is approved by the FDA under Section 178.3297.

DCL 896 Zinc Oxide, PW.4 (USP Grade, French Process) is a high purity USP French Process grade of zinc oxide with a pigment white 4 color index. It finds major applications in plastics such as PVE, PE and PP, industrial and decorative coatings, and also in rubber materials.

DCL 2583 Diarylide Yellow, PY.83 is a very strong, bright, and transparent red shade of diarylide yellow with good lightfastness and bleed properties. It also exhibits good overall resistance properties, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of inks, plastics, and coating applications.

DCL 2183-A Azo Yellow, PY.183 is a non-warping, red shade yellow with excellent heat stability, recommended for plastic applications. It is FDA-approved (Section 178.3297) and also exhibits good overall resistance properties, lightfastness, and weather fastness. This makes it a reliable and versatile choice for a wide range of plastic and coating applications.

DCL 1144 Disazo Red, PR.144 is a medium to slightly blue-shade red pigment with high purity, tinting strength, and excellent heat stability. It is primarily used in the coloration of plastics such as PVC, ABS, polystyrene, polyolefins, and polyester spin dyeing, and is also used in some specialty coatings and inks, though it can cause warpage in HDPE.

DCL 5051 Phthalocyanine Blue, PB.15:1 is an alpha crystal form of a red-shaded phthalocyanine blue that is rendered solvent stable. 5051 is FDA-approved (Section 178.3297), and is recommended for applications such as general industrial paints, various coatings, printing inks, plastics, rubber, floor coverings, and textile printing.

DCL 1233 Carbazole Violet, PV.23 is a high-performance pigment with a bluish-violet color and high tint strength. It exhibits excellent fastness to light and weathering in most applications and is only slightly affected by reductions with titanium dioxide.

DCL 1073-A DPP Orange, PO.73 is a medium shade opaque orange pigment with very good light and chemical resistance. This pigment is mainly used in the following applications: Plastics such as PVC, PP, PS, PE and PET. Automotive/Aerospace, powder and industrial coatings. Solvent flexo inks Rubber products

DCL AG120A Shiny Satin, 5 - 25 m is a silver-white transulcent pearlescent pigment with a satin finish. This product is composed of a mixture of titanium and mica that appears as a silver white powder. It is FDA-approved (Section 178-3297).

DCL 2312 Diarylide Yellow, PY.12 is a medium-shade diarylide yellow offering excellent tinting strength and value. It exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability, making it a reliable and versatile choice for a range of coatings, inks, and rubber applications.

DCL 5251 Phthalocyanine Blue, PB.15:1 (easy-to-disperse) is a low-cost, heat-stable, easy-to-disperse alpha-crystal form of red-shaded phthalocyanine blue pigment. It is FDA-approved (Section 178.3297) and also exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of plastic and coating applications.

DCL 2413 Diarylide Yellow, PY.13 is an AAMX medium-shade diarylide yellow offering good opacity and tinting strength compared to other diarylide pigments. It exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of inks, plastics, and coating applications.

DCL 8086 Rutile Titanium, PW.6 (Sulfate) is a durable rutile titanium dioxide with good hiding power manufactured by the sulfate process. 8086 is surface treated alumina and silica to improve the dispersibility. It is mainly recommended for the construction industry.

DCL R2041 Rutile Titanium, PW.6 (Sulfate) is rutile titanium dioxide manufactured by the sulfate process. R2041 is surface-treated aluminum, silicon compounds, and organic matter for ease of dispersion and exterior durability. It is approved for food contact applications under 21 CFR 178.3297.

DCL 2113 Pyrazolone Orange, PO.13 is a bright, clean, transparent pyrazolone orange pigment with excellent tinting strength. 2113 has fair lightfastness in masstone/deep shades and is poor in tints. It is recommended to be used in a wide range of plastic, ink, and coating applications.

DCL Orange GX Pyrazolone Orange, PO.13, is an orange pigment that provides a bright red shade of orange, commonly used in offset and aqueous inks. Additionally, DCL Orange GX is versatile enough to be used in a wide range of paint and plastic applications.

Ultrablue® 6130, PB.29 (H-55, 5002, 6102, 6122, 509) is a low sulfur, low moisture ultramarine blue pigment. It is FDA-approved (Section 178-3297) and exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of plastics, paper, rubber and coating applications.

Ultrablue® 3511, PB.29 (FCP-R type) is a low sulfur, low moisture ultramarine blue pigment. It is FDA-approved (Section 178-3297) and exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of plastic and coating applications.

DCL AG308 Classical Gold, 10 - 60 m is a gold transulcent pearlescent pigment with a brilliant finish. This product is composed of a mixture of titanium, mica, and iron oxide that takes on the appearance of gold powder, and is approved by the FDA under Section 178-3297.

DCL Black 1 is a jet-black powder produced by high temperature calcination that has good UV and visible opacity, is chemically inert, heat-resistant, and stable to ultraviolet light. It is non-bleeding and non-migratory, has exceptional durability and hiding power, and is compatible with most resin systems and polymers. It is also non-warping and is typically used in applications such as liquid and powder coatings, inks, dispersions, and plastics, where resistance to heat, light, and weather are needed.

DCL AG6136 Pure Silk Silver, 10 - 60 m is a silver transulcent pearlescent pigment with a satin finish and is FDA approved (Section 178-3297). This pigment finds major applications in the following: Plastics such as PVC, PP. PS, PE and PET. Powder and industrial coatings. UV and offset inks Rubber products

DCL AG6351 Shimmer Gold, 10 - 100 m is a gold pearlescent pigment with a bright finish. It is FDA approved (Section 178-3297). This product is mainly used in the following applications Plastics such as PVC, PP, PS, PE and PET. Powder and industrial coatings. UV and offset inks. Rubber

DCL 1816 Dianisidine Orange, PO.16 is a blue-shade Dianisidine Orange pigment designed for non-exterior film, blow molding, injection molding, and wire and cable applications. It offers very good heat stability up to 240°C and has a high tint strength compared to other orange color indices. DCC 1816 is considered to be the most cost-effective lead-free alternative to molybdate orange.

DCL AG401A Luster Black, 10 - 60 m is a silver gray translucent pearlescent pigment that boasts a brilliant finish, and it is approved by the FDA under Section 178-3297. The mixture that comprises this pigment is made up of mica, titanium dioxide, and carbon black, resulting in a silver gray powder as its appearance.

DCL AG425 Prussian Blue, 10 - 60 m is a gold pearlescent pigment with a brilliant finish. It is FDA approved (Section 178-3297). This product is mainly used in the following applications Plastics such as PVC, PP, PS, PE and PET. Powder and industrial coatings. UV and offset inks. Rubber

DCL AG111 Fine Satin Silver, <15 m is a silver-white transulcent pearlescent pigment with a satin finish. It is specially recommended to be used in general industrial coatings, plastics and printing ink applications. The product is FDA-approved (Section 178- 3297).

Ultrablue® 7125, PB.29 (FG-75, 6302) is a low sulfur, low-moisture ultramarine blue pigment. It is FDA-approved (Section 178-3297) and exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of plastic and coating applications.

Ultrablue® 6120, PB.29 (G-58, 5005) is a low sulfur, low-moisture ultramarine blue pigment. It is FDA-approved (Section 178-3297) and exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of plastic and coating applications.