Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
- Features
- Can be applied by brush, roller or spray.
- Excellent resistance to a variety of solvents, acids and bases.
- Excellent chemical resistance.
- Excellent long term gloss retention.
- High impact and abrasion resistance.
- Cures at temperatures as low as 40°F (4.5°C).
Applications & Uses
- Markets
- Uses
Used as a topcoat over Protal™ Liquid Coatings, Archco Coatings & Linings to provide color coding, abrasion resistance, chemical resistance and long term UV stability.
- Application
When applying over Protal Liquid Coatings refer to the Application Specifi cations for the complete topcoat instructions. Surface should be dry and above 40°F (4.5°C). If the Protal Liquid Coating has cured more than 72 hours, a light sweep blast or roughening of the surface with 60 grit sandpaper must happen before applying another coat. After the surface is roughened, wipe the entire surface with MEK or approved solvent to remove the dust and other contamination. Add hardener to base and mix at a slow speed until a constant color is achieved making sure all sides of container are scraped. Archco 65 can be brushed, rolled or sprayed. When applying use a wet film thickness gage to measure mil thickness. The coating can be sprayed using a minimum of 45:1 airless equipment.
Properties
- Technical Data
| Value | Units | Test Method / Conditions | |
| Atmospheric Temperature Limit | 93.0 | °C | - |
| Dry Film Thickness | 76 - 125 | microns per coat | - |
| Dry Film Thickness (Recommended) | 75 - 125 | microns per coat | - |
| Dry Time (25°C, 55% R.H. To Handle) | 4 - 6 | hours | - |
| Dry Time (25°C, 55% R.H. To Recoat) | 6 - 8 | hours | - |
| Dry Time (25°C, 55% R.H. To Touch) | 2 - 4 | hours | - |
| Flash Point | 4.0 | °C | - |
| Mixing Ratio | 4:1 | - | - |
| Pot Life (25°C) | 3.0 | hours | ASTM 2196 |
| Solids by Volume | 62 - 65 | % | - |
| Solids by Weight | 71 - 73 | % | - |
| Theoretical Coverage (25.4 microns, DFT) | 92.35 | m2/L | - |
| Viscosity (25°C, mixed) | 80.0 | KU | - |
| VOC | 300.0 | g/L | - |
| Wet Film Thickness | 125 - 203 | microns per coat | - |
Safety & Health
- Health & Safety
Spray or brush under well ventilated conditions. Wear suitable protective clothing and glasses. See safety data sheet.
Packaging & Availability
- Packaging
1 gallon kits (3.8 liter kit)
5 gallon kits (19 liter kit)
Special kit sizes are available.
Storage & Handling
- Storage and Handling
Store the containers in a dry, well ventilated area. The containers should be kept tightly sealed.
Shelf life: 2 years.
DOT classification: Paint UN 1263