Knowde Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Technologies
- Chemical Description
Compound based on Bis-((C10-C13)alkylphenyl)-iodoniumhexafluoroantimonate
Applications & Uses
- Applications
- Cure Method
- Adhesive & Sealant Type
- Coating Type
- Applications
DEUTERON UV 1250 may be used as a UV hardener for all binding agents that can be cationically polymerized and release coatings. Alkaline additives should be avoided because they impair the effectiveness of DEUTERON UV 1250.
- Overpint varnishes
- Screen inks
- Flexo inks
- Metal coating
- Plastic coating
- Food packaging
- Laminating adhesives
- Dosage
Concentrations of at least 1 % of DEUTERON UV 1250 are recommended for technical applications. It may be necessary to use 5 % or more for special requirements. The higher the dosage, the greater the hardening speed without having to fear that the film becomes brittle. If possible, radiation exposure should take place at intervals. This would have the consequence of improved energy utilization with regard to the targeted final hardness
- Processing
DEUTERON UV 1250 can be worked into the binding agent with a fast agitator or other agitating aggregates such as dissolvers without any problems.
Properties
- Physical Form
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Type / Chem. base | Antimonat | — | — |
| Active Content | 50 | % | — |
Safety & Health
- Safety Regulations
DEUTERON UV 1250 is classified as a hazardous material. Detailed information can be found in the safety data sheet.
Storage & Handling
- Shelf Life
- 12 Months
- Storage Conditions & Package Sizes
Under the right conditions, DEUTERON UV 1250 can be stored in its original tightly closed containers for at least 12 months at room temperature. Do not expose to direct sunlight. Store at temperatures not below 10 °C and, if possible, not over 35 °C. Avoid contact with water.Plastic-can (20 kg net)