Products

Because of its cationic character and the extremely high polarity of Deuteron LE 100 LV, the electrical resistance is reduced considerably – even when using small quantities.Deuteron LE 100 LV is delivered with an active content of 100 %. The product is free of solvent and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing a master batch. That is why the product is particularly suitable for solvent free systems.Deuteron LE 100 LV can be used (among others) in PUR-foams (production of shoe-soles), UV- or electron-beam curing screen inks to avoid electrostatic charge. back

Deuteron MK-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron MM 684 is suited for all common coil-coating systems. This includes its utilization in conventional high-quality stove enamels. In addition, Deuteron MM 684 can be used in a variety of applications, preferably in pigmented paints and lacquers.Deuteron MM 684 is a mixture of finest-ground (micronized) materials that is well suited as a matting agent in paints and lacquers. Apart from the good matting effect, special importance is also attached to a low binder requirement in order not to affect the flow properties of the matted system considerably. This leads to a good formulation margin in the processing.Deuteron MM 684 does not contain any wax additives, thus coating layers equipped with it are not expected to cause any adhesion problems in multi-layer systems or repair coatings. back

Deuteron OG 8634 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent-based paint systems, Deuteron OG 8634 improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax based, Deuteron OG 8634 does not spoil the recoatability. The small particle size allows for its use in coating-systems which are applied in low film thickness. Deuteron OG 863x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage.Deuteron OG 8634 is designed for the use in aqueous and solvent-based lacquers and in coatings which are applied in low film thickness. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax dispersions with their well-known typical side-effects. back

Deuteron MK-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron OG 8674 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent-based paint systems, Deuteron OG 8674 improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax-based additives Deuteron OG 8674 does not spoil the recoatability. The small particle size also allows for its use in coating systems which are applied in low film thickness. Deuteron OG 867x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage.Deuteron OG 8674 is designed for use in aqueous lacquers and in coatings which are applied in low film thickness. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax-dispersions with their well-known typical side-effects. back

Deuteron VT 920 is suitable for use as a thickener and stabilizing additive for all aqueous coating systems and technical applications such as waterthinnable lacquers, dispersion paints and plasters, glues, printing inks, silicon paints as well as pigments and filler preparations. Deuteron VT 920 prevents settling of pigments and fillers and separation of the liquid phase during storage. Application is made easier through pronounced structural viscosity. The viscosity sinks when the shear force is increased. It rapidly returns to the starting value when the shear force is removed. The product is compatible with most commonly used binders and thickeners used in the coating industry. back

Deuteron VT 930 is suitable for use as a thickener and stabilizing additive for all aqueous coating systems and technical applications such as waterthinnable lacquers, dispersion paints and plasters, glues, printing inks, silicon paints as well as pigments and filler preparations. Deuteron VT 930 prevents settling of pigments and fillers and separation of the liquid phase during storage. Application is made easier through pronounced structural viscosity. The viscosity sinks when the shear force is increased. It rapidly returns to the starting value when the shear force is removed. The product is compatible with most commonly used binders and thickeners used in the coating industry. back

Deuteron MM 677 can be used as a matting agent in various aqueous coating systems. These can be lacquers based on acrylic dispersion, wood glazings, wood- and fur­niture lacquers, printing inks and industrial finishes (air-drying and stoving enamels).In comparison with powdery matting agents Deuteron MM 677 particularly offers the advantage of dust-free handling. The product can be easily incorporated by all common dispersing processes. When producing clear varnish, only a small rate of shear is required to incorporate Deuteron MM 677. This prevents forming of micro foam in the production batch. Even when Deuteron MM 677 is added to the mill base or the dispersion-medium, overmilling is practically impossible due to its excellent shear stability.The matting liquid is kept free of wetting agent and binder. Their presence usually limits the compatibility. Waxes or similar products are not included either. This allows for the use of Deuteron MM 677 in a wide field of applications. Deuteron MM 677 causes little cloudiness and is therefore also suitable for the use in clear varnishes. back

Pergopak-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Pergopak M-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Pergopak M only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron-WAX MPO is a micronized polyolefin wax characterized by a fine particle size distribution and good ease of dispersion.The use of Deuteron-WAX MPO also leads to excellent results in powder coatings.The dispersed wax shows resistance to settling. Additionally it retards the settling of pigments and fillers and assists in their redispersion. The product has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. back

Deuteron UV RS20 improves the surface smoothness and the resistance to abrasion and scrubbing of UV coatings and printing inks. It gives the surfaces pleasant, silky-soft haptical properties.Application Radically curing UV coatings and printing inks, in particular for solvent-free systems. back

Deuteron-WAX PP/2 is a micronized poly-propylene wax characterized by a fine particle size distribution and good ease of dispersion.It can be used in all solvent-based lacquer systems and printing inks; both air-drying and stoving. The use of Deuteron-WAX PP/2 also leads to excellent results in powder coatings.The dispersed wax shows resistance to settling. Additionally it retards the settling of pigments and fillers and assists in their redispersion. Deuteron-WAX PP/2 has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. back

Deuteron-WAX A is a micronized polyamide wax characterized by a fine particle size distribution and good ease of dispersion.Deuteron-WAX A is used as a matting agent to produce a mat or silk finish in all types of furniture and wood lacquers. In metal decorating and coil applications Deuteron-WAX A can be used to improve water resistance, slip properties and mar resistance in a wide range of general and special, solvent-based and water-based coatings. In powder coatings the wax is used as a flattening agent.Deuteron-WAX A shows excellent heat stability, chemical resistance and hardness. It shows better recoatability compared to micronized waxes based on polyethylene or polypropylene. The dispersed wax shows resistance to settling. Additionally it retards the settling of pigments and fillers and assists in their redispersion. The product has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. back

Deuteron-WAX TF has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. Deuteron-WAX TF imparts excellent buff resistance and slip properties. It produces a durable, semi-gloss finish when used either alone or with silica.Application It can be used in all solvent-based lacquer systems and printing inks; both air-drying and stoving. The use of Deuteron-WAX TF also leads to excellent results in powder coatings. back

Deuteron-WAX PP is a micronized poly-propylene wax characterized by a fine particle size distribution and good ease of dispersion.It can be used in all solvent-based lacquer systems and printing inks; both air-drying and stoving. The use of Deuteron-WAX PP also leads to excellent results in powder coatings.The dispersed wax shows resistance to settling. Additionally it retards the settling of pigments and fillers and assists in their redispersion. Deuteron-WAX PP has been designed specifically for incorporation in lacquers and coatings using high speed stirring only. This makes the production process more economic. back

Deuteron UV 1240 may be used as a UV hardener for all binding agents that can be cationically polymerized, particularly epoxides. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1240.The photoinitiator Deuteron UV 1240 hardens binder systems that polymerize cationically under UV exposure. Deuteron UV 1240 is soluble in these binder systems including the usual solvents and reactive diluents. back

For aqueous systems, such as dispersion paint, glue, dispersion plaster, water-dilutable lacquer, printing inks, silicate paint, aqueous pigment/filler preparations.Especially well suited for the building and do-it-yourself sectors. Wherever high viscosity and pseudoplastic behavior are required but high-performance stirring devices, such as dissolvers, are not available.In pigmented aqueous systems, such as dispersion paint and cast, the use of Deuteron VT 856 prevents a deposition of the pigments and fillers as well as a separation of the liquid phase during storage. The applicability of the coating materials is improved. The product is compatible with most binding and thickening agents commonly used in the paint industry. When properly used, Deuteron VT 856 allows the preparation of highly viscous systems without technical help. back

Deuteron SO 300 is a fine dispersion of an elastomer in water. It imparts coatings with a “soft touch” surface, even if the binder is not an especially soft or elastic type. At the same time it acts as a matting agent. The effect depends on the dosage and the system’s other components, particularly the binder. Deuteron SO 300 is temperature resistant up to 160 °C.The small particle size makes the product suitable for thin-film applications. Deuteron SO 300 contains no waxes and thus does not negatively affect the recoatability.In 2-component lacquers, the inherent OH-functionality allows the product to be cross-linked in the coating matrix. This can lead to higher mechanical and chemical resistances, which are not attainable by conventional means of adjusting “soft touch” and matting.Application Deuteron SO 300 is intended for all water-based lacquers, coatings and printing inks which have to offer a special feel and matting up to a “soft touch”. It can be used in systems of all ranges of film thickness. Deuteron SO 300 can be combined with other organic matting agents, waxes and silicas. back

Deuteron OG 8614 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent based paint systems, Deuteron OG 8614 improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax-based additives, Deuteron OG 8614 does not spoil the recoatability. The small particle size allows for its use in coating-systems which are applied in low film thickness. Deuteron OG 861x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage.Deuteron OG 8614 is recommended for use in solvent based coatings which are applied in low film thickness, e.g. can-coatings. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax dispersions with their well-known typical side-effects. back

Deuteron UV 2257 may be used as a UV initiator for all binders that can be cationically polymerized, particularly epoxides used in the printing ink sector. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 2257.Deuteron UV 2257 enables the cationic polymerization of special binder systems through a starting reaction. Deuteron UV 2257 is soluble in these binder systems including common solvents and reactive diluents. back

Deuteron OG 8672 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent-based paint systems, Deuteron OG 8672 improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax-based additives Deuteron OG 8672 does not spoil the recoatability. The small particle size also allows for its use in coating systems which are applied in low film thickness. Deuteron OG 867x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage.Deuteron OG 8672 is designed for use in aqueous lacquers and in coatings which are applied in low film thickness. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax-dispersions with their well-known typical side-effects. back

Deuteron OG 8803 is based on polymethyl urea resin (PMU) as the active ingredient. Features of the duroplastic active ingredient are its high hardness and abrasion resistance. It is resistant to most standard solvents used in coatings and has good thermal stability of over 200°C. When used as an additive in radically curing coatings systems, Deuteron OG 8803 improves the static and dynamic friction of the coatings and provides improved mechanical resistance. Compared to wax-based additives, Deuteron OG 8803 does not adversely affect the recoatability recoated. The very fine solid particles (PMU) allows the products to be used in coating systems that are applied as extremely thin films. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage. Therefore the reduction in gloss that can be achieved with Deuteron OG 880x can be customized to realize a variety of surface protection and matting objectives.Deuteron OG 8803 is intended for use in radiation curing coatings and printing inks. They are particularly recommended for use in systems which require a thin film thickness, e.g. printing inks and overprinting lacquers. The use of Deuteron OG 8803 can substantially improve coatings (ranging from silky sheen to matt) which contain silicic acid as a matting agent and possess inadequate surface resistance. back

Deuteron VT 910 is suitable for use as a thickener and stabilizing additive for all aqueous coating systems and technical applications such as waterthinnable lacquers, dispersion paints and plasters, glues, printing inks, silicon paints as well as pigments and filler preparations. Deuteron VT 910 prevents settling of pigments and fillers and separation of the liquid phase during storage. Application is made easier through pronounced structural viscosity. The viscosity sinks when the shear force is increased. It rapidly returns to the starting value when the shear force is removed. The product is compatible with most commonly used binders and thickeners used in the coating industry. back

Deuteron OG 330 noticeably improves slip, abrasion and rub resistance in aqueous coatings and inks. Deuteron OG 330’s low viscosity and its dust-free delivery form enable easy handling for paint manufacturing. The concentration of 50 % supports cost-effectiveness.Application Water-based clear lacquers and top coats where the presence of PTFE can be accepted, e.g. air drying and stoving enamels, aqueous acrylic lacquers and inks. back

Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water.Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. back

Deuteron OG 8805 is based on polymethyl urea resin (PMU) as the active ingredient. Features of the duroplastic active ingredient are its high hardness and abrasion resistance. It is resistant to most standard solvents used in coatings and has good thermal stability of over 200°C. When used as an additive in radically curing coatings systems, Deuteron OG 8805 improves the static and dynamic friction of the coatings and provides improved mechanical resistance. Compared to wax-based additives, Deuteron OG 8805 does not adversely affect the recoatability recoated. The very fine solid particles (PMU) allows the products to be used in coating systems that are applied as extremely thin films. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage. Therefore the reduction in gloss that can be achieved with Deuteron OG 880x can be customized to realize a variety of surface protection and matting objectives.Deuteron OG 8805 is intended for use in radiation curing coatings and printing inks. They are particularly recommended for use in systems which require a thin film thickness, e.g. printing inks and overprinting lacquers. The use of Deuteron OG 8805 can substantially improve coatings (ranging from silky sheen to matt) which contain silicic acid as a matting agent and possess inadequate surface resistance. back

The photoinitiator Deuteron UV 1242 hardens binder systems that polymerize cationically under UV exposure. Deuteron UV 1242 is soluble in these binder systems including the usual solvents and reactive diluents.Deuteron UV 1242 may be used as a UV hardener for all binding agents that can be cationically polymerized, particularly silicones and epoxides. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1242. back

Deuteron LE 947 is designed to be used in solvent-based finishing coatings and primers to decrease the electrical resistance in order to adjust the conductivity for electrostatic spraying.Because of its cationic character and its high polarity, Deuteron LE 947 reduces the electrical resistance of solvents and their mixtures. The product is compatible with most of the binders common in the paint industry. It is highly effec­tive, thus making it possible to obtain the required conductivity with a small addition of the product. Generally there is no impact on drying and adhesion of the coating system. back

Deuteron MK-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron OG 861 is based on polymethyl urea resin as an effective substance. The resin shows excellent hardness and abrasion resistance. It is resistant to most customary solvents and shows a good resistance to temperatures of up to 200 °C. When used as an additive in solvent based paint systems, Deuteron OG 861 improves properties regarding slip and static friction and provides increased mechanical resistance. Compared with wax-based additives, Deuteron OG 861 does not spoil the recoatability. The small particle size allows for its use in coating-systems which are applied in low film thickness. Deuteron OG 861x can reduce the gloss when used as a surface additive. This can be desired for certain applications. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage.Deuteron OG 861 is recommended for use in solvent based coatings which are applied in low film thickness, e.g. can-coatings. Due to the good weather resistance and color fastness of the used polymer the product can also be used in coating systems for exterior applications. This additive is the alternative to wax dispersions with their well-known typical side-effects. back

Because of its cationic character and the extreme polarity of Deuteron LE 50, the electric resistance of organic solvents and their mixtures is considerably reduced – even when using small quantities. Deuteron LE 50 is soluble in all common lacquer solvent mixtures, sometimes being slightly cloudy. deuteron LE 50 is a diluted version of Deuteron LE 80. back

Deuteron OG 8820 is based on polymethyl urea resin (PMU) as the active ingredient. Features of the duroplastic active ingredient are its high hardness and abrasion resistance. It is resistant to most standard solvents used in coatings and has good thermal stability to over 200 °C. When used as an additive in radically curing coatings systems, Deuteron OG 8820 improves the static and dynamic friction of the coatings and provides improved mechanical resistance. Compared to wax-based additives, Deuteron OG 8820 does not adversely affect the recoatability recoated. The very fine solid particles (PMU) allows the products to be used in coating systems that are applied as extremely thin films. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage. Therefore the reduction in gloss that can be achieved with Deuteron OG 882x can be customized to realize a variety of surface protection and matting objectives.Deuteron OG 8820 is intended for application in radiation curing coatings and printing inks. They are particularly recommended for use in systems which require a thin film thickness, e.g. printing inks and overprinting lacquers. The use of Deuteron OG 8820 can substantially improve coatings (ranging from silky sheen to matt) which contain silicic acid as a matting agent and possess inadequate surface resistance. back

Deuteron OG 8824 is based on polymethyl urea resin (PMU) as the active ingredient. Features of the duroplastic active ingredient are its high hardness and abrasion resistance. It is resistant to most standard solvents used in coatings and has good thermal stability to over 200 °C. When used as an additive in radically curing coatings systems, Deuteron OG 8824 improves the static and dynamic friction of the coatings and provides improved mechanical resistance. Compared to wax-based additives, Deuteron OG 8824 does not adversely affect the recoatability recoated. The very fine solid particles (PMU) allows the products to be used in coating systems that are applied as extremely thin films. The gloss reduction is dependant on the type of employed binder, the applied film thickness and the selected dosage. Therefore the reduction in gloss that can be achieved with Deuteron OG 882x can be customized to realize a variety of surface protection and matting objectives.Deuteron OG 8824 is intended for application in radiation curing coatings and printing inks. They are particularly recommended for use in systems which require a thin film thickness, e.g. printing inks and overprinting lacquers. The use of Deuteron OG 8824 can substantially improve coatings (ranging from silky sheen to matt) which contain silicic acid as a matting agent and possess inadequate surface resistance. back

Deuteron WS imparts excellent mar resistance and improves anti-blocking of varnishes and coatings. The product is different to conventional products because it does not negatively influence the recoatability and has no tendency to „orange-peel“.Deuteron WS does not only improve the slip but also the leveling and gloss of the coating in several applications.Application Deuteron WS can be used in a wide range of solvent-based lacquers and coatings, particularly wood finishes, water dilutable systems, waterbased paper coatings, baking enamels. back

Because of its cationic character and the extreme polarity of Deuteron LE 80, the electric resistance of organic solvents and their mixtures is considerably reduced – even when using small quantities.Deuteron LE 80 is soluble in all common lacquer solvent mixtures, sometimes being slightly cloudy.Deuteron LE 80 can be used in air-drying primers and coatings, baking enamels, 2-compound systems and wood finishes. back