Knowde Enhanced TDS
Identification & Functionality
- CASE Ingredients Functions
- Technologies
- Product Families
- Chemical Description
Compound with the active ingredient Bis-(4-methyl-phenyl) iodonium hexafluorophosphate
Applications & Uses
- Applications
- Cure Method
- Adhesive & Sealant Type
- Coating Type
- Applications
Deuteron UV 2257 may be used as a UV initiator for all binders that can be cationically polymerized, particularly epoxides used in the printing ink sector. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 2257.
- Dosage
Concentrations of at least 1 % of Deuteron UV 2257 are recommended for technical applications. It may be necessary to use 5 % or more for special requirements. The higher the dosage, the greater the increase of hardening speed without having to fear brittleness of the film. It is not necessary to use co-solvents. If UV sensitizers are used (such as ITX), this may lead to an increase in the depth hardness of the paint film. If possible, radiation exposure can take place at intervals. Regarding the final hardness, this would improve the energy utilization.
- Processing
Deuteron UV 2257 can be worked smoothly into the binding agent using a speed stirrer or other mixing aggregate, e.g. dissolver.
Properties
- Physical Form
- Typical Properties
Value | Units | Test Method / Conditions | |
Specific Weight | approx. 1.4 | g/cm3 | — |
Refraction Index | approx. 1.483 | — | — |
Flash point | above 135 | °C | — |
Concentration (active ingredients) | approx. 50 | % | — |
Reactive Solvent | propylene carbonate | — | — |
Type / Chem. base | Phosphat | — | — |
Active Content | 50 | % | — |
Safety & Health
- Safety Regulations
According to Regulation (EC) No. 1272/2008 Deuteron UV 2257 is classified as a dangerous product and therefore needs to be labeled.
Storage & Handling
- Shelf Life
- 12 Months
- Storage Conditions & Package Sizes
Under the right conditions, Deuteron UV 2257 can be stored in its original tightly closed containers for at least 12 months at room temperature. Do not expose to direct sunlight. Store at temperatures not below 10 °C and, if possible, not over 35 °C. Avoid contact with water. Remainders of the product that are not immediately processed should always be stored in an opaque plastic container.Plastic canister (25 kg net)