Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Recommended Application Specifications
DISSCO 501 is ready to use directly from the container, no thinning or heating is required. Apply DISSCO 501 by roller or spray at an application rate as specified or as recommended by the product manufacturer for the product being applied requiring primer. If no manufacturer recommended specifications are available, DISSCO recommends that a one-coat application of DISSCO 501 be applied at a rate of 0.6 to 1 gallon per 100 square feet of area with a finished dry film thickness of approximately 5 to 8 mils.
Properties
- Color
- Physical Properties
Value | Units | Test Method / Conditions | |
Additives | 2 - 5 | % | - |
Flash Point | 103 - 140 | °F | - |
Vehicle Solids | 40 - 60 | % | - |
Volatile Vehicle | 40 - 60 | % | - |
Weight per gallon | 6.9 - 7.3 | lbs. | - |
Technical Details & Test Data
- Specification
Base asphalt meets specification ASTM D-449 type II.
DISSCO 501 meets or exceeds specifications:
- ASTM D-41
- Federal specification SS-A-701
Safety & Health
- Caution
It contains mineral spirits. Do not use near fire or flame. Use with adequate ventilation. Vapor is harmful, avoid prolonged or repeated contact with skin or breathing of vapor. Close container tightly after each use. Harmful or fatal if swallowed. If swallowed, do not induce vomiting. Call physician immediately. Keep out of reach of children.
Packaging & Availability
- Availability
DISSCO 501 is available in packaged sized of 5-gallon pails and 55-gallon drums.
Storage & Handling
- Storage & Handling
Will not freeze, may be stored outdoors. When temperature is below 60°F, store product indoors overnight prior to use. Clean equipment with mineral spirits.