DOG Chemie Deogrip

Deogrip Micro A 2010 is an excellent matting agent which provides homogeneous, silky matt surfaces. Contrary to conventional matting agents such as silica, it does not give problems such as brightening, cloudiness or sedimentation. Deogrip Micro A offers silky surfaces with an excellent mar resistance. Deogrip Micro A 2010 is compatible with most binder systems. The best soft touch effects are obtained in combination with a suitable base system and higher concentrations of Deogrip. Deogrip Micro A 2010 an A 2020 are completely free of organic solvents and therefore perfectly suited for low VOC formulations.

Deogrip Micro R 1510 is based on a castor oil polymer, which is finely dispersed in DPGDA (dipropylene glycol diacrylate). The castor oil polymer is characterized by an excellent chemical resistance and good transparency. Furthermore, the polymer is clearly hydrophobic and Deogrip Micro R 1510 is therefore favorable for use in wood coatings.

Deogrip Micro S 1005 is a low particle size version for applications with low film thickness. Deogrip Micro S 1005 is also equipped with a rheology additive in order to prevent sedimentation during storage.

For Deogrip Micro S 1010 (former trade name Deogrip Micro S) the solvent used is butyl acetate. Therefore, it is suitable for fast drying systems such as UV-curing and low thickness level lacquers.

Deogrip Micro S 1011 ist eine Modifikation vom Deogrip Micro S 1010 und enthält ein zusätzliches Rheologieadditiv, sodass auch nach längerer Standzeit kein Absetzen des Feststoffs beobachtet wird.

Deogrip Micro S 1020 is based on the widely used Dipropylene- Glycol-Methyl-Ether (DPM). This kind of solvent is 100% water-soluble and because of its rather slow evaporation rate, preferred for many applications. Due to its high flash point, Deogrip Micro S 1020 is not classified as a HAZMAT (hazardous material).

Deogrip Micro S 1030 is based on Dipropylene-Glycol-Dimethyl-Ether(DMM). DMM is known as a low-odor solvent with medium fast evaporation rate and with higher flash point. Additionally DMM does not contain hydroxyl-groups and therefore is excellent suited for PU-systems. Micro S 1030 is not classified as HAZMAT.

Deogrip WPF-NT can be employed as a matting agent or surface additive in powder coatings. Due to the particle size, a pre-milling of the material may be necessary. Typical concentrations are between 5 and 15 %, although there may be some variation for special cases. Depending on the total recipe and processing, anything from a soft, flexible surface to a finely structured surface with more grip may be obtained. Due to its viscoelastic properties, Deogrip WPF-NT is also an effective shock absorber. Deogrip WPF-NT is based on renewable resources, adding a further positive aspect with regards to the ongoing sustainability discussion.

Deogrip WPF-NT can be employed as a matting agent or surface additive in powder coatings. Due to the particle size, a pre-milling of the material may be necessary. Typical concentrations are between 5 and 15 %, although there may be some variation for special cases. Depending on the total recipe and processing, anything from a soft, flexible surface to a finely structured surface with more grip may be obtained. Due to its viscoelastic properties, Deogrip WPF-NT is also an effective shock absorber. Deogrip WPF-NT is based on renewable resources, adding a further positive aspect with regards to the ongoing sustainability discussion.