Search:
Medical Devices & Assemblies
167 products found on DuPont DuPont products found for View all Medical Devices & Assemblieson Knowde
With TDS
Kalrez® 6230 product card banner

DuPont

Kalrez® 6230

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, O-rings

Features: Low Contamination From Extractables, Chemical Resistant, Good Steam Cycling Resistance

End Uses: Semiconductor Applications, O Rings

Color: Black

Kalrez® 6230/6230A* perfluoroelastomer parts are a black product that provide superior chemical resistance and low contamination from extractables in pharmaceutical and food handling applications where FDA compliance is required. Kalrez® 6230/6230A parts are especially suited for Water for Injection (WFI) systems, Steam-in-Place (SIP) cleaning and other critical systems. Kalrez° 6230/6230A parts are thermally stable up to 260°C (500°F), permitting them to be used in Stage II Sterilization processes, where other elastomers lose their sealing ability.

Kalrez® 6221 product card banner

DuPont

Kalrez® 6221

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, O-rings

Features: Low Contamination From Extractables, Chemical Resistant, Good Steam Cycling Resistance

End Uses: Semiconductor Applications, O Rings

Color: White

Kalrez® 6221 perfluoroelastomer parts are a white product that provide superior chemical resistance and low contamination from extractables in pharmaceutical and food handling applications where FDA compliance is required. Kalrez® 6221 parts are especially suited for Water for Injection (WFI) systems, Steam-in-Place (SIP) cleaning and other critical systems. Kalrez® 6221 parts are thermally stable up to 260°C (500°F), permitting them to be used in Stage II Sterilization processes, where other elastomers lose their sealing ability. Kalrez® 6221 is available as O-rings. For white custom parts, please refer to Kalrez® LS205 parts.

Liveo™ 365 35% Dimethicone Nf Emulsion product card banner

DuPont

Liveo™ 365 35% Dimethicone NF Emulsion

Ready to Use Product Type: Lubricant

Application Areas: Medical Devices

Compatible Substrates & Surfaces: Polyolefins, Acrylic, Metal, Polyurethane, Polyamide, Polycarbonate (PC), Glass, Silicone, Elastomers & Rubbers, Polyvinyl Chloride (PVC), Fluoroelastomer, Plastics, Polystyrene (PS)

Features: Good Release Properties, Good Wettability, Low Wear, Excellent Lubricity, Low Friction

Chemical Family: Silicones

Liveo™ 365 35% Dimethicone NF Emulsion is a water-dilutable emulsion containing nonionic emulsifiers and 35% National Formulary Dimethicone. The emulsion is not manufactured or tested to be pyrogen free. Liveo™ 365 35% Dimethicone NF Emulsion may be used in a variety of applications where it is beneficial to dispense a lubricating silicone fluid in a water-dilutable delivery system.

Kalrez® 3035 product card banner

DuPont

Kalrez® 3035

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: O-rings, Seals

Features: Chemical Resistant

End Uses: Semiconductor Applications, O Rings

Color: Black

Kalrez® 3035 perfluoroelastomer parts are a carbon black filled product well suited for use in production of valve stem packings. It may also be used to manufacture O-rings. Kalrez® 3035 was originally developed for use in Kalrez® KVSP® where low process temperatures or cold ambient conditions are involved. Chemical compatibility properties of Kalrez® 3035 are similar to those of Kalrez® 3018. This product has excellent chemical resistance to a wide variety of solvents and has a maximum service temperature of 288 °C (550 °F).

Liveo™ Mg 7-9900 Soft Skin Adhesive Kit (A & B) product card banner

DuPont

Liveo™ MG 7-9900 Soft Skin Adhesive Kit (A & B)

Ready to Use Product Type: 2K (2 component) Adhesive & Sealant, Solvent free (100% Solids) Adhesive, Solvent free (100% Solids) Adhesive & Sealant, 2K (2 component) Adhesive

Chemical Family: Silicones

Liveo™ MG 7-9900 Soft Skin Adhesive Kit (A & B) is a soft elastomeric silicone adhesive for adhering medical devices to the skin with medium adhesion force and gentle removal.

Kalrez® 1050lf product card banner

DuPont

Kalrez® 1050LF

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, O-rings

Features: Amine Resistant, Good Compression Set

End Uses: Semiconductor Applications, O Rings, General Purpose

Color: Black

Kalrez® 1050LF perfluoroelastomer parts are a general-purpose product for O-rings, seals, and other parts used in chemical process industries. It has good hot water/steam resistance, excellent amine resistance, and good compression set properties. The maximum suggested service temperature is 288°C (550°F). It is not recommended for use in organic or inorganic acids at high temperatures.

Kalrez® Spectrum™ 6380 product card banner

DuPont

Kalrez® Spectrum™ 6380

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, O-rings

Features: Chemical Resistant, Good Mechanical Properties

End Uses: Semiconductor Applications, O Rings

Color: Cream

Kalrez® Spectrum™ 6380 perfluoroelastomers parts are a non-black product developed specifically for chemical processes involving hot, aggressive amines. In addition, it has excellent overall chemical resistance (see chart below). This cream colored product is easily identifiable when selecting an O-ring material for harsh chemical plant services. This material has excellent mechanical properties and is a top choice for both static and dynamic sealing applications. A maximum service temperature of 225°C is suggested while short-term excursions to higher temperatures are permissible.

Liveo™ Biomedical Grade Hcr Q7-4735 product card banner

DuPont

Liveo™ BioMedical Grade HCR Q7-4735

Polymer Name: Silicone Elastomer

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: Enhanced Tear Resistant, Non Blooming, High Gas Permeability Pigmentable, Low Emissions, Good Colorability, High Consistency

Tear Strength: 35.0 - 35.0 kN/m

Silastic™ BioMedical Grade ETR Elastomers (QI-4720, Q7-4735, Q7-4750, QI-4765 and Q7-4780) are a series of two-part, Enhanced Tear-Resistant (ETR) silicone elastomers that consist of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. The elastomers exhibit a range of hardness from soft (20 Shore A) to firm (80 Shore A). Each elastomer is supplied as a two-component kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is then thermally cured via addition-cure (platinum-cure) chemistry.

Liveo™ Pharma 50 Tubing product card banner

DuPont

Liveo™ Pharma 50 Tubing

Polymer Name: Silicone Elastomer

Physical Form: Tube

Features: Hydrophobic, Excellent Flexibility, Good Thermal Stability, Easily Sterilized, High Resilience, Consistent Performance, Low Emissions, Complete Traceability, Low Extractables, Rigorous Change Control

End Uses: Tubing, Medical/Healthcare Applications, Medical Devices

Tensile Strength: 90.0 - 90.0 MPa

Liveo™ Pharma 50 Tubing is Pharmaceutical grade silicone tubing for transferring of ultra-pure liquids, air or steam in pharmaceutical and biotechnological manufacturing processes. Designed for applications that require the transfer of high purity fluids where contamination is a concern like filling lines.

Kalrez® 0090 product card banner

DuPont

Kalrez® 0090

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, O-rings, Valve Seats

Features: High Modulus, Durable, Good Thermal Stability, High Hardness, Chemical Resistant

End Uses: Semiconductor Applications, Pump Parts, Valves, O Rings, Valve Parts

Color: Black

Kalrez® 0090 perfluoroelastomer parts deliver durable, reliable sealing solutions for applications requiring excellent rapid gas decompression (RGD) properties as well as high hardness, high modulus properties, and excellent extrusion resistance (even without backup rings). Potential oil and gas applications include downhole equipment such as drilling and completion tools, as well as industrial equipment including pumps, valves and compressors. Kalrez® 0090 has been certified by two independent laboratories to meet rigorous requirements for resistance to RGD. In addition to demonstrated RGD resistance, Kalrez® 0090 seals provide superior performance in regard to chemical and temperature properties. Chemical resistance: Kalrez® 0090 is resistant to chemicals encountered in the oil and gas industry, including sour process streams containing H2S. Broad temperature capability: Kalrez® 0090 retains good physical properties up to temperatures as high as 250°C (482°F) and down to 21°C (5.8°F). Under pressurized conditions, in laboratory tests, Kalrez® 0090 has demonstrated low temperature performance down to 40°C (40°F).

Liveo™ Class Vi Elastomers C6-180 Parts A & B product card banner

DuPont

Liveo™ Class VI Elastomers C6-180 Parts A & B

Polymer Name: Silicone Elastomer

Processing Methods: Extrusion

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Autoclaved, Platinum Catalyzed, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Low Emissions, Lot-to-lot consistency, Non Blooming

Liveo™ Class VI Elastomers (C6-135. C6-150, C6-165. C6-180) Parts A & B are a series of two-part platinum-catalyzed silicone elastomers.

Kalrez® 8900 product card banner

DuPont

Kalrez® 8900

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: O-rings, Seals

Features: Fluorine Gas Resistant, Low Moisture Content, Excellent Resistance To Plasma Radicals, Low Compression Set, Good Thermal Stability, Low Outgassing

End Uses: Semiconductor Applications, O Rings

Color: Black

Kalrez® 8900 perfluoroelastomer parts are a black product for oxidation, diffusion, ALD, and LPCVD applications. It offers outstanding thermal stability, very low outgassing and excellent (low) compression set properties. Kalrez® 8900 parts exhibit excellent retention of physical properties at elevated temperatures, have excellent mechanical strength and are well-suited for both static and dynamic sealing applications. A maximum application temperature of 325°C (617°F) is suggested. Short excursions to higher temperatures may also be possible. Ultrapure post-cleaning and packaging is_x005F standard for all Kalrez® 8900 parts. _x005F

Liveo™ Class Vi Elastomers C6-150 Parts A & B product card banner

DuPont

Liveo™ Class VI Elastomers C6-150 Parts A & B

Polymer Name: Silicone Elastomer

Processing Methods: Extrusion

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Autoclaved, Heat Stabilized, Platinum Catalyzed, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Low Emissions, Lot-to-lot consistency, Non Blooming

Liveo™ Class VI Elastomers (C6-135, C6-150, C6-165, C6-180) Parts A & B are a series of two-part platinum-catalyzed silicone elastomers.

Liveo™ 366 35% Dimethicone Nf Emulsion product card banner

DuPont

Liveo™ 366 35% Dimethicone NF Emulsion

Ready to Use Product Type: Lubricant

Application Areas: Medical Devices

Compatible Substrates & Surfaces: Polyolefins, Acrylic, Metal, Polyurethane, Polyamide, Polycarbonate (PC), Glass, Silicone, Elastomers & Rubbers, Polyvinyl Chloride (PVC), Fluoroelastomer, Plastics, Polystyrene (PS)

Features: Good Release Properties, Good Wettability, Low Wear, Excellent Lubricity, Low Friction

Chemical Family: Silicones

Liveo™ 366 35% Dimethicone NF Emulsion is a water-dilutable emulsion containing nonionic emulsifiers and 35% National Formulary Dimethicone. The emulsion is not manufactured or tested to be pyrogen free. Liveo™ 366 35% Dimethicone NF Emulsion may be used in a variety of applications where it is beneficial to dispense a lubricating silicone fluid in a water-dilutable delivery system.

Liveo™ 360 Medical Fluid 350 Cst product card banner

DuPont

Liveo™ 360 Medical Fluid 350 cSt

Ready to Use Product Type: Lubricant

Application Areas: Medical Devices

Compatible Substrates & Surfaces: Glass, Plastics, Elastomers & Rubbers, Metal

Features: Low Toxicity, Good Stability, Chemical Resistant, Excellent Lubricity, Excellent Water Resistance

Chemical Family: Silicones

Liveo™ 360 Medical Fluid is a clear, colorless polydimethylsiloxane liquid that is available in five standard viscosities.

Liveo™ Class Vi Elastomers C6-165 Parts A & B product card banner

DuPont

Liveo™ Class VI Elastomers C6-165 Parts A & B

Polymer Name: Silicone Elastomer

Processing Methods: Extrusion

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Heat Stabilized, Autoclaved, Platinum Catalyzed, High Gas Permeability, Non-tacky surface, Can be post cured, Pigmentable, Lot-to-lot consistency, Non Blooming

Liveo™ Class VI Elastomers (C6-135, C6-150, C6-165, C6-180) Parts A & B are a series of two-part platinum-catalyzed silicone elastomers.

Liveo™ Biomedical Grade Hcr Q7-4750 product card banner

DuPont

Liveo™ BioMedical Grade HCR Q7-4750

Polymer Name: Silicone Elastomer

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: High Gas Permeability Pigmentable, Low Emissions, Good Colorability, High Consistency, Enhanced Tear Resistant, Non Blooming

Tear Strength: 46.0 - 46.0 kN/m

Silastic™ BioMedical Grade ETR Elastomers (QI-4720, Q7-4735, Q7-4750, QI-4765 and Q7-4780) are a series of two-part, Enhanced Tear-Resistant (ETR) silicone elastomers that consist of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. The elastomers exhibit a range of hardness from soft (20 Shore A) to firm (80 Shore A). Each elastomer is supplied as a two-component kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is then thermally cured via addition-cure (platinum-cure) chemistry.

Liveo™ Mg 7-9800 Soft Skin Adhesive Kit (A & B) product card banner

DuPont

Liveo™ MG 7-9800 Soft Skin Adhesive Kit (A & B)

Ready to Use Product Type: 2K (2 component) Adhesive & Sealant, Solvent free (100% Solids) Adhesive, Solvent free (100% Solids) Adhesive & Sealant, 2K (2 component) Adhesive

Chemical Family: Silicones

Liveo™ MG 7-9800 Soft Skin Adhesive Kit (A & B) is a soft elastomeric silicone adhesive for adhering medical devices to the skin with light adhesion force and gentle removal.

Liveo™ Qp1-250 Liquid Silicone Rubber Kit product card banner

DuPont

Liveo™ QP1-250 Liquid Silicone Rubber Kit

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Injection Molding, Liquid Injection Molding

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Fast Production Cycle, Heat Stabilized, Autoclaved, Consistent High Quality, Good Colorability, High Gas Permeability, Platinum Catalyzed, Good Processability, Low Emissions, Non Blooming

Liveo™ QP1 Liquid Silicone Rubbers (LSRs) are platinum-catalyzed, heat-cured materials designed for the fabrication of medical devices and device components including those intended for implantation in humans for less than 30 days and non-implant applications, specifically designed for liquid injection molding.

Liveo™ 7-9600 Soft Filling Elastomer Parts A & B product card banner

DuPont

Liveo™ 7-9600 Soft Filling Elastomer Parts A & B

Polymer Name: Silicone Elastomer

End Uses: Medical/Healthcare Applications, Medical Devices

Features: Pigmentable, Low Viscosity, Good Processability, Solventless, Good Colorability

Soft silicone elastomer for producing cohesive and soft feeling medical device parts.

Liveo™ Biomedical Grade Lsr Q7-4840 product card banner

DuPont

Liveo™ BioMedical Grade LSR Q7-4840

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: Heat Stabilized, Autoclaved, Good Colorability, High Gas Permeability, Platinum Catalyzed

Liveo™ Bio Medical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are a series of two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion.Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are heat-cured elastomer raw materials for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days.

Zytel® Lcpa 158 Nc010 product card banner

DuPont

Zytel® LCPA 158 NC010

Polymer Name: Polyamide 612 (PA 612)

Processing Methods: Injection Molding, Extrusion, Coating

Zytel® 158 NC010 is an intermediate viscosity polyamide 612 resin.

Liveo™ 7-4107 Silicone Elastomer Membrane product card banner

DuPont

Liveo™ 7-4107 Silicone Elastomer Membrane

Chemical Family: Silicones

Liveo™ 7-4107 Silicone Elastomer Membrane is a thin film of 100% cured silicone rubber. It is supplied on a rigid polycarbonate carrier film, which can be easily peeled off after processing.

Liveo™ Pharma Advanced Pump Tubing product card banner

DuPont

Liveo™ Pharma Advanced Pump Tubing

Polymer Name: Silicone Elastomer

Physical Form: Tube

Features: Contamination Protection, Superior Resiliency, Hydrophobic, Excellent Flexibility, Durable, Tear Resistance, Easily Sterilized, Excellent Filling Accuracy, Consistent Performance, Complete Traceability, Low Extractables, Rigorous Change Control

End Uses: Tubing, Medical/Healthcare Applications, Medical Devices

Tensile Strength: 8.9 - 8.9 MPa

Liveo™ Pharma Advanced Pump Tubing is a Translucent pharmaceutical grade silicone tubing designed for pumping of ultrapure liquids in pharmaceutical and biotechnological manufacturing processes. Made from biomedical grade tear resistant platinum-cured elastomer. Liveo™ Pharma Advanced Pump Tubing used in peristaltic pumps where durability is required. DuPont Advanced Pump Tubing offers up to four times the pump life of standard platinum cure silicone tubing.

Liveo™ Mdx4-4210 product card banner

DuPont

Liveo™ MDX4-4210

Polymer Name: Silicone Elastomer

Processing Methods: Resin Transfer Molding, Compression Molding

End Uses: Prototyping, Medical/Healthcare Applications, Medical Devices, Mold Making

Features: Non Blooming, Translucent, Low Warpage, Consistent High Quality, Pourable, Pigmentable, Low Emissions, Good Thick Section Cure, Excellent Dielectric Properties

Liveo™ MDX4-4210 BioMedical Grade Elastomer is a pourable two- component product which, when combined, cures to a translucent silicone rubber over several hours at room temperatures, but may be more rapidly cured by application of heat.

Liveo™ Biomedical Grade Lsr Q7-4850 product card banner

DuPont

Liveo™ BioMedical Grade LSR Q7-4850

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: Autoclaved, Platinum Catalyzed, High Gas Permeability

Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are a series of two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion. Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are heat-cured elastomer raw materials for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days.

Liveo™ Biomedical Grade Lsr Q7-4870 product card banner

DuPont

Liveo™ BioMedical Grade LSR Q7-4870

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: Autoclaved, Platinum Catalyzed, High Gas Permeability

Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are a series of two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion.Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are heat-cured elastomer raw materials for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days.

Tpsiv® 3345-65a Natural 25564 Thermoplastic Elastomer product card banner

DuPont

TPSiV® 3345-65A Natural 25564 Thermoplastic Elastomer

Polymer Name: Thermoplastic Silicone Vulcanizate (TPSiV), Thermoplastic Vulcanizate (TPV)

Processing Methods: Injection Molding, Extrusion

Density: 1170.0 - 1170.0 kg/m³

Tear Strength: 41.0 - 41.0 kN/m

TPSiV® 3345-65A thermoplastic elastomer is a material with good chemical resistance and excellent abrasion resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.

Crastin® 6130 Nc010 product card banner

DuPont

Crastin® 6130 NC010

Polymer Name: Polybutylene Terephthalate (PBT)

Processing Methods: Injection Molding, Extrusion, Coating, Sheet, Plaques & Profiles Extrusion

Crastin® 6130 NC010 is an unreinforced, medium/high viscosity polybutylene terephthalate resin for extrusion and injection molding.

Rynite® 545 Bk504 product card banner

DuPont

Rynite® 545 BK504

Polymer Name: Polyethylene Terephthalate (PET), Thermoplastic Polyester

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Flexural Modulus: 14000.0 - 14000.0 MPa

Rynite® 545 BK504 is a 45% glass-reinforced modified polyethylene terephthalate resin.

Liveo™ Biomedical Grade Lsr 7-4860 product card banner

DuPont

Liveo™ BioMedical Grade LSR 7-4860

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Liveo™ BioMedical Grade LSR 7-4860 is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion.

Liveo™ Biomedical Grade Lsr 7-4870 product card banner

DuPont

Liveo™ BioMedical Grade LSR 7-4870

Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)

Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Liveo™ BioMedical Grade LSR 7-4870 is a two-part platinum-catalyzed silicone elastomer specifically designed for liquid injection molding or supported extrusion.

Kalrez® As-568 product card banner

DuPont

Kalrez® AS-568

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: O-rings, Seals

End Uses: Semiconductor Applications, O Rings

The dimensions and tolerances of Kalrez® O-rings are listed and conform to AS-568. DuPont and its local authorized distributors of Kalrez® parts maintain inventories of many standard AS-568 O-rings. Actual lead times will be established at the time of the order placement. We work closely with customers to understand and meet their needs.

Liveo™ Biomedical Grade Hcr Q7-4780 product card banner

DuPont

Liveo™ BioMedical Grade HCR Q7-4780

Polymer Name: Silicone Elastomer

End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants

Features: High Gas Permeability Pigmentable, Low Emissions, Good Colorability, High Consistency, Enhanced Tear Resistant, Non Blooming

Tear Strength: 26.0 - 26.0 kN/m

Silastic™ BioMedical Grade ETR Elastomers (QI-4720, Q7-4735, Q7-4750, QI-4765 and Q7-4780) are a series of two-part, Enhanced Tear-Resistant (ETR) silicone elastomers that consist of dimethyl and methylvinyl siloxane copolymers and reinforcing silica. The elastomers exhibit a range of hardness from soft (20 Shore A) to firm (80 Shore A). Each elastomer is supplied as a two-component kit (Part A and Part B), equal portions (by weight) of which must be thoroughly blended together prior to use. The elastomer is then thermally cured via addition-cure (platinum-cure) chemistry.

Rynite® 545 Nc010 product card banner

DuPont

Rynite® 545 NC010

Polymer Name: Polyethylene Terephthalate (PET), Thermoplastic Polyester

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent

Flexural Modulus: 13500.0 - 13500.0 MPa

Rynite® 545 NC010 is a 45% glass-reinforced modified polyethylene terephthalate resin.

Liveo™ Class Vi Elastomers C6-570 Lsr product card banner

DuPont

Liveo™ Class VI Elastomers C6-570 LSR

Polymer Name: Silicone Elastomer

End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices

Features: Cost Effective, Heat Stabilized, Autoclaved, Solventless, Consistent High Quality, Platinum Catalyzed, High Gas Permeability, Can be post cured, Good Processability, Low Emissions, Fast Curing, Non Blooming

Liveo™ Class VI Elastomers (C6-530, C6-540, C6-550, C6-560, C6-570) Parts A & B are a series of two-part platinum catalyzed silicone elastomers.