Products
DuPont
Kalrez® 4079
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals, Custom, Diaphragms, O-rings
Features: Good Mechanical Properties, High Temperature Resistance, Heat Aging Resistant, Low Compression Set, Good Thermal Stability, Chemical Resistant, General Purpose
End Uses: Semiconductor Applications, Pump Parts, Aircraft Applications
Color: Black
Kalrez® 4079 perfluoroelastomer parts are a low compression set product for general purpose use in O-rings, diaphragms, seals and other parts used in the chemical process and aircraft industries. It is a carbon black filled product with excellent chemical resistance, good mechanical properties, and outstanding hot air aging properties. It exhibits low swell in organic acids, inorganic acids and aldehydes, and has good response to temperature cycling effects. A maximum service temperature of 316°C (600°F) is suggested, with short excursions to higher temperatures possible. Kalrez® 4079 is not recommended for use in hot water/steam applications or in contact with certain hot aliphatic amines, ethylene oxide, or propylene oxide.
DuPont
Kalrez® Spectrum™ 6375
Applications: Other Packaging & Assembly Applications, Semiconductor Manufacturing, Equipment & Parts
Product Families: Parts & Shapes
Chemical Family: Fluoropolymers
Polymer Name: Perfluoroelastomer (FFKM)
End Uses: Semiconductor Applications, Valve Parts, Electrical Connectors
Kalrez® Spectrum™ 6375 is designed to give outstanding performance in the widest possible range of chemicals and temperatures. Mixed streams, once a problem for many chemical processors, can now be handled by 6375, furthermore, the curing system also allows for a maximum service temperature of 275°C (525 °F) which translates to increased chemical resistance over all temperature ranges, especially if high temperature process excursions occur. This combination of chemical and thermal resistance provides advantages for chemical processors. Kalrez® Spectrum™ 6375 is a carbon black-filled product for general use in O-rings, seals, diaphragms and other parts specifically for the chemical process industry. This product has excellent broad chemical resistance, good mechanical properties, and outstanding hot-air aging properties. Kalrez® Spectrum™ 6375 is well suited for use in mixed process streams because of its excellent resistance to acids, bases, and amines. It is also recommended for use in hot water, steam, pure ethylene oxide and propylene oxide.
DuPont
Kalrez® Spectrum™ 7075
Applications: Other Packaging & Assembly Applications, Semiconductor Manufacturing, Equipment & Parts
Product Families: Parts & Shapes
Chemical Family: Fluoropolymers
Polymer Name: Perfluoroelastomer (FFKM)
End Uses: Semiconductor Applications, Valve Parts, Pump Parts
Kalrez® perfluoroelastomer parts are the material of choice for mechanical seals, valves, flanges and other demanding chemical and hydrocarbon processing applications. Kalrez® Spectrum™ 7075 has enhanced physical properties including very low compression set and improved seal force retention. It is a carbon black-filled product utilizing proprietary cure chemistry. Its mechanical properties are designed for improved sealing performance in both high temperature environments and temperature cycling situations. Kalrez® Spectrum™ 7075 O-rings have a glossy finish. This product was developed specifically for the chemical and hydrocarbon industries to provide improved chemical and thermal resistance better than the industry standard set by Kalrez® 4079.
DuPont
BETASEAL® 16100H
Ready to Use Product Type: Primer, 1K (1 component) Coating, Solventborne Coating
Compatible Substrates & Surfaces: Glass
Features: Improved Adhesion
Chemical Family: Silanes
BETASEAL® 16100H is a solvent-based silane blend type primer. BETASEAL® 16100H is a clear, one-step primer used to promote adhesion to glass and used in conjunction with an approved polyurethane adhesive
DuPont
BETAPRIME® 5405 UV
Ready to Use Product Type: Primer
Compatible Substrates & Surfaces: Polyolefins, Painted Surfaces, Plastics
Features: Improved Adhesion
Chemical Family: Polyisocyanates
BETAPRIME® 54051JV is a primer containing UV trace with short and long open time. Compatibility with pretreated polyolefins and SMC substrates.
DuPont
Multiflex® G 60 A 11 BT 13893 Thermoplastic Elastomer
Tear Strength: 23.0 - 23.0 kN/m
Strain at Break: 650.0 - 650.0 %
Multiflex® Automotive GT Range can be transformed between 190°C to 230°C. In this temperature range, materials are stable, above, thermal degradation occurs, resulting in yellowing and significant odor emanation. Multiflex® G 60 A 11 BT 13893 is designed for use in injection molding/extrusion
DuPont
Kalrez® 9100
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals
Features: Excellent Resistance To Plasma Radicals, Low Compression Set, Good Thermal Stability, Good Elastic Recovery, Low Outgassing, Low Metal Content, Good Mechanical Properties
End Uses: Semiconductor Applications, Pump Parts
Color: Amber
Kalrez® 9100 is an amber translucent product targeted specifically for PECVD, ALD, HDPCVD and Conductor (Poly/Metal) Etch applications*. Kalrez® 9100 has been specifically designed for low erosion and ultra-low particle generation in harsh plasma environments. It offers excellent thermal stability, very low outgassing as well as excellent elastic recovery and good mechanical strength properties and is well suited for both static and select dynamic sealing applications*. A maximum application temperature of 300°C (572°F) is suggested. Ultrapure post-cleaning and packaging is standard for allKalrez® 9100 parts.
DuPont
BETAMATE® 1480P
Ready to Use Product Type: Epoxy Adhesive, Structural Adhesive, 1K (1 component) Adhesive
Compatible Substrates & Surfaces: Aluminum, Metal, Steel, Galvanized Steel
Cure Method: Heat Cure
Application Method: Electrodeposition, E-Coat
Chemical Family: Epoxy & Epoxy Derivatives
BETAMATE® 1480P is a one-component, heat-curing, epoxy-based structural adhesive developed especially for body shop applications. It is capable of bonding oily galvanized, cold-rolled steel, and aluminum. BETAMATE® 1480P has excellent adhesion to automotive steels (include coated steels and pretreated aluminum with good tolerance to oily and dry lubes). BETAMATE® 1480P helps to increase the stiffness and the crash stability of the entire car body with high durability of the adhesive and adhesive bond and corrosion protection due to its sealing capability. It is compatible with other mechanical and thermal joining technique, compatible with the e-coat process and wash-off resistance. Typical applications include bonding of the vehicle body structure and closure hem flange applications.
DuPont
BETASEAL® Xpress 30
Ready to Use Product Type: Structural Adhesive, 1K (1 component) Adhesive
BETASEAL® Xpress30 is a single component, high modulus non-conductive adhesive with Reinforced Polyisotropic Micro-network (RPM) technology for high initial green strength that enables rapid crosslinking to speed bonding, allowing faster minimum drive-away times. BETASEAL® Xpress30 is a cold applied, high modulus and non-conductive (enhances vehicle's structural integrity / passenger comfort with reduced road noise, while reducing GPS / phone / HUD / defroster connection interference). BETASEAL® Xpress30 has industry-leading ease of use application, tooling, decking performance, short cut-off string, crash proven 30 minute minimum drive-away time down to 0°F.
DuPont
BETATECH™ 2029
Applications: Batteries, Other Battery Materials, Electrical & Electronic Systems
Product Families: Conductive Adhesives, Adhesives & Sealants
Chemical Family: Polyurethanes (PU)
End Uses: Batteries
BETATECH™ 2029 is a two component thermal interface material based on a polyurethane technology with a very high thermal conductivity. BETATECH™ 2029 is based on aluminum trihydroxide fillers that lead to a very high thermal conductivity accompanied by a low density. The material can be efficiently applied and the parts can be joined quickly due to a low press-in force. The material is free of silicones.
DuPont
MOLYKOTE® 165 LT Grease
Applications: Equipment & Parts, Automotive Fluids & Lubricants, Lubricants & Functional Fluids
Product Families: Greases, Fluids & Lubricants
MOLYKOTE® 165 LT Gearwheel Grease for the lubrication of highly stressed open gears and reducing gears made of metal, with a peripheral speed of up to 2.5 m/s. Open gears that are subjected to high stresses and bad weather effects. Successfully used in crushing plants and in transmission gears and threaded spindles of heavy, crank-driven presses.
DuPont
BETAPRIME® 5433
Ready to Use Product Type: Primer
Compatible Substrates & Surfaces: Polycarbonate (PC), Plastics
Features: Improved Adhesion
Chemical Family: Sulfur-based Compounds
BETAPRIME® 5433 is an adhesion-promoting primer for painted and plastic substrates with short and long open time. It is to be used in combination with DuPont Adhesives PUR-Adhesive/sealants. All DuPont Adhesives products are primarily developed in co-operation with the automobile manufacturers, according to their needs and their specifications, they are approved for the specific applications as defined by the customer. The use of the product other than approved appliction have to be released in written form by the Technical Service of DuPont Adhesives.
DuPont
THIXON® P-11-EF
Ready-to-Use Product Type: 1K (1 component) Adhesive, Primer
Compatible Substrates & Surfaces: Elastomers & Rubbers, Metal, Steel, Stainless Steel, Aluminum
THIXON® P-11-EF is a vulcanizing adhesive primer used with all MEGUM® or THIXON® cover coat adhesives for bondingmost elastomers to various substrates. It can also be used as a one coat for bonding polar elastomers and will bondmetal substrates including hot and cold rolled steel, stainless steel alloys, brass, aluminum and zinc plated metals. It is a very good general use primer coat for rubber to metal applications. Providing excellent boiling water and salt spray resistance.
DuPont
THIXON® OSN-2-EF
Ready-to-Use Product Type: 2K (2 component) Adhesive, 1K (1 component) Adhesive
Compatible Substrates & Surfaces: Brass, Elastomers & Rubbers, Aluminum, Metal, Steel, Polyamide, Plastics
THIXON® OSN-2-EF is a general purpose one-coat adhesive used for bonding various elastomers to metals, such as hot and cold rolled steel, stainless steel alloys, brass, aluminum, and zinc plated metals._x005F THIXON® OSN-2-EF bonds Natural Rubber (NR), Polybutadiene (BR), Polyisoprene (IR), Styrene Butadiene Rubber (SBR), Chloroprene (CR) and Polyacrylate (ACM)._x005F THIXON® OSN-2-EF is also used for post-vulcanization bonding. In addition, THIXON® OSN-2-EF bonds rubber to synthetic fibers such as rayon and polyester. It is a good general purpose rubber to substrate bonding agent that can be used as single coat or two coat system. The use of a ROBOND, THIXON® or MEGUM® primer or a two coat system will provide the best environmental resistance, however THIXON® OSN-2-EF does quite well as a stand alone coating in many general rubber to metal bonding situations.
DuPont
BETASEAL® 1766 EU
Applications: Appliances & Electronics, Body Shop & Repair, Transportation Assembly
Product Families: Structural Adhesives, Adhesives & Sealants
Chemical Family: Polyurethanes (PU)
BETASEAL® 1766 EU is a high viscosity, high modulus, glass bonding adhesive that can be used primerless to paint and glass. Due to its chemistry, it delivers a high initial handling strength to hold the position of the bonded parts. It is a one component, ambient moisture curing, solvent free adhesive for direct glazing applications. It shows excellent sag and bead stability. Skin formation and curing are dependent on humidity, temperature and application dimension.
DuPont
THIXON® 715-EF&B
Ready-to-Use Product Type: 1K (1 component) Adhesive, 2K (2 component) Adhesive
Compatible Substrates & Surfaces: Metal, Plastics, Polyurethane, Elastomers & Rubbers, Acrylic
THIXON® 715-EF&B by DuPont is commonly used as Bonding Adhesive for a variety of applications in Industrial and Automotive.
DuPont
MOLYKOTE® 7 Release Compound
Applications: Equipment & Parts, Automotive Fluids & Lubricants, Lubricants & Functional Fluids
Product Families: Lubricants & Oils, Fluids & Lubricants
Chemical Family: Silicones
MOLYKOTE® 7 Release compound is a Dimethyl silicone compound for a variety of lubrication and protection applications. It can be used in applications including mold release agent for foundry shell and core molds. Break-in treatment for bladders on tire presses, rubber lubricant and preservative. Release agent for adhesives and glues. Cable pulling lubricant to draw rubber-covered cable through conduit. Release agent for plastic extruders and processing equipment and release agent for plastic film packaging machines.
DuPont
THIXON® 423 Clear
Ready-to-Use Product Type: 1K (1 component) Adhesive
Compatible Substrates & Surfaces: Metal, Plastics, Epoxies, Polyurethane, Polyesters
THIXON® 423 Clear is a vulcanizing adhesive which can be used as a one-coat adhesive or as a covercoat adhesive over THIXON®403/404 adhesive primer for bonding castable polyurethane to various substrates.THIXON®423 can also be used as a one-coat adhesive for bonding thermoplastic polyurethanes to metal. THIXON®423 can also be used as a protective coating for metal, polyurethane, epoxy, polyester and fiberglass compounds. It is a good one-coat system for thermoplastic urethane to metal bonding with better heat resistance that THIXON® 405.
DuPont
THIXON® 2001-EF
Ready-to-Use Product Type: 1K (1 component) Adhesive
Compatible Substrates & Surfaces: Elastomers & Rubbers, Polyolefins, Metal, Plastics
Application Method: Roll Coater, Brush
THIXON® 2001-EF is a vulcanizing adhesive that can be used as a one-coat adhesive or as a two-coat system applied cover THIXON® P-11-EF or THIXON® P-6-EF adhesive primers. It bonds with a wide variety of elastomers, including natural rubber, SBR, chloroprene, EPDM, butyl and nitrile.THIXON® 2001-EF is formulated at the proper viscosity and solids content to give the desired dry film thickness for maximum bonding in one coat brushing or roller coat applications. It is a vulcanizing adhesive that can be used as a one-coat adhesive or as a two-coat system applied over THIXON® P-11-EF or P-6-EF adhesive primers. THIXON® 2001-EF represents the highest reactivity of any of the cover coat adhesives in our product line and is used to pick up difficult to bond rubber compounds
DuPont
Kalrez® 6230
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals, O-rings
Features: Low Contamination From Extractables, Chemical Resistant, Good Steam Cycling Resistance
End Uses: Semiconductor Applications, O Rings
Color: Black
Kalrez® 6230/6230A* perfluoroelastomer parts are a black product that provide superior chemical resistance and low contamination from extractables in pharmaceutical and food handling applications where FDA compliance is required. Kalrez® 6230/6230A parts are especially suited for Water for Injection (WFI) systems, Steam-in-Place (SIP) cleaning and other critical systems. Kalrez° 6230/6230A parts are thermally stable up to 260°C (500°F), permitting them to be used in Stage II Sterilization processes, where other elastomers lose their sealing ability.
DuPont
BETAMATE® 6120
Ready to Use Product Type: Epoxy Adhesive, Structural Adhesive, 1K (1 component) Adhesive
Compatible Substrates & Surfaces: Aluminum, Metal, Steel
Cure Method: Heat Cure
Chemical Family: Epoxy & Epoxy Derivatives
BETAMATE® 6120 is a one-component, heat-curing, epoxy-based adhesive developed especially for body shop applications. It has excellent adhesion for metal substrate (aluminum and steel) applications. BETAMATE® 6120 has excellent adhesion for aluminum bonding with excellent stress durability, high sag resistance, high wash off resistance and exceptionally high -40°C peel strength. Typical applications include bonding of the vehicle body structure and closure hem flange applications.
DuPont
Liveo™ Antifoam C Emulsion
Chemical Name: Methylcellulose, Simethicone
Function: Defoamer
Labeling Claims: Halal, Kosher
Certifications & Compliance: Halal, Kosher, FDA 21 CFR Regulations, United States Pharmacopeia (USP)
Liveo™ Medical Antifoam C Emulsion is a highly effective and versatile silicone defoamer. Depending on foaming medium, this product eliminates foam that has already formed (defoams) and also prevents the formation of foam (antifoams). Liveo™ Medical Antifoam C Emulsion is a water-dilutable emulsion containing 30 percent by weight of Medical Antifoam A Compound (Simethicone USP) and methylcellulose. Liveo™ Medical Antifoam C Emulsion can be used as supplied or diluted with water. Its easy dilution makes this emulsion especially useful as a defoamer for aqueous systems, such as biofermentations.
DuPont
Kalrez® 6221
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals, O-rings
Features: Low Contamination From Extractables, Chemical Resistant, Good Steam Cycling Resistance
End Uses: Semiconductor Applications, O Rings
Color: White
Kalrez® 6221 perfluoroelastomer parts are a white product that provide superior chemical resistance and low contamination from extractables in pharmaceutical and food handling applications where FDA compliance is required. Kalrez® 6221 parts are especially suited for Water for Injection (WFI) systems, Steam-in-Place (SIP) cleaning and other critical systems. Kalrez® 6221 parts are thermally stable up to 260°C (500°F), permitting them to be used in Stage II Sterilization processes, where other elastomers lose their sealing ability. Kalrez® 6221 is available as O-rings. For white custom parts, please refer to Kalrez® LS205 parts.
DuPont
Kalrez® Spectrum™ 7375
Polymer Name: Perfluoroelastomer (FFKM)
Physical Form: Seals
Features: Good Compressive Strength, Good Mechanical Properties, Good Retention of Properties
End Uses: Semiconductor Applications, Pump Parts
Color: Black
Kalrez® Spectrum™ 7375 perfluoroelastomer parts are an innovative FFKM product based on a patented crosslinking system for chemical process industry applications where broad chemical and water/steam resistance are needed at elevated temperatures. Kalrez® Spectrum™ 7375 parts exhibit excellent compression set resistance, outstanding physical property retention, and good mechanical strength properties. A maximum application temperature of 300°C is suggested.
DuPont
BETASEAL® 8000-1F
Ready to Use Product Type: Structural Adhesive, 1K (1 component) Adhesive
Compatible Substrates & Surfaces: Glass
Cure Method: Moisture Cure
Chemical Family: Polyurethanes (PU)
BETASEAL® 8000-1F is a one-component, moisture-curing adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions._x005F _x005F BETASEAL® 8000-1F is a cold processable, medium viscosity, low modulus adhesive with excellent UV stability attributes. It is primerless to paint on automotive paints.
DuPont
Liveo™ Antifoam Q7-2587, 30% Simethicone Emulsion
Function: Defoamer
CAS Number: 8050-81-5
Synonyms: Simiticone
Liveo™ Q7-2587, 30% Simethicone Emulsion USP is a water-dilutable, non-ionic emulsion containing 30% Simethicone USP by weight. Emulsified Simethicone compound has less than 2% low-molecular-weight volatile silicone species. Tested according to and complies with all United States Phatmacopeia (USP) requirements for Simethicone emulsion, It has a smooth consistency that allows the product to be poured or pumped.
DuPont
Liveo™ 365 35% Dimethicone NF Emulsion
Applications: Surgical Instruments & Trays, Medical Devices & Assemblies, Laboratory & Diagnostics
Product Families: Medical Grade Lubricants, Fluids & Lubricants
Chemical Family: Silicones
Liveo™ 365 35% Dimethicone NF Emulsion is a water-dilutable emulsion containing nonionic emulsifiers and 35% National Formulary Dimethicone. The emulsion is not manufactured or tested to be pyrogen free. Liveo™ 365 35% Dimethicone NF Emulsion may be used in a variety of applications where it is beneficial to dispense a lubricating silicone fluid in a water-dilutable delivery system.
DuPont
THIXON® P-11
Applications: Transportation Assembly, Bonding & Assembly
Product Families: Other Adhesives & Sealants, Adhesives & Sealants
THIXON® P-11 is a solvent-based primer, used in combination with MEGUM® or THIXON® cover coats. THIXON® P-11 can also be used as a one-coat adhesive for the bonding of polar elastomers (NBR, AEM, ACM). COMPOSITION: THIXON® P-11 consists of reactive polymers and pigments in methyl isobutyl ketone (MIBK). It is formulated without reportable levels of lead or other toxic heavy metals. ENVIRONMENTAL RESISTANCE: Rubber-to-metal bonding systems using THIXON® P-11 display resistance to severe environmental exposures such as humidity and corrosion. Properly prepared bonds will also resist heat, salt fog, oil and water exposures.
DuPont
MOLYKOTE® 111 Compound
Applications: Equipment & Parts, Other Electrical & Electronics Applications, Automotive Fluids & Lubricants
Product Families: Lubricants & Oils, Caulks & Sealants, Adhesives & Sealants
Chemical Family: Silicones
MOLYKOTE® 111 Compound is used as a valve lubricant and sealant.
DuPont
Liveo™ MG 7-9900 Soft Skin Adhesive Kit (A & B)
Ready to Use Product Type: Solvent free (100% Solids) Adhesive, 2K (2 component) Adhesive
Chemical Family: Silicones
Liveo™ MG 7-9900 Soft Skin Adhesive Kit (A & B) is a soft elastomeric silicone adhesive for adhering medical devices to the skin with medium adhesion force and gentle removal.
DuPont
MOLYKOTE® Longterm 1 Plus Extreme Pressure Bearing Grease
Applications: Equipment & Parts, Chemical & Industrial Manufacturing
Product Families: Greases, Fluids & Lubricants
Chemical Family: Mineral Oils, Lithium Soaps
MOLYKOTE® Longterm 1 Plus Extreme Pressure Bearing Grease is a Lubricating grease for metal/metal combinations with slow to medium-fast movements, especially with high loads. Used successfully for journal bearings in sugar mills.
DuPont
BETASEAL® 1758-1F
Ready to Use Product Type: Structural Adhesive, Solvent free (100% Solids) Adhesive, 1K (1 component) Adhesive
Compatible Substrates & Surfaces: Glass
Cure Method: Moisture Cure
Chemical Family: Polyurethanes (PU)
BETASEAL® 1758-1F is a one-component, moisture-curing, solvent-free adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions._x005F BETASEAL® 1758-1F is a warm and cold processable, high viscosity, medium modulus, glass bonding adhesive that can be used primerless on paint. Warm application of BETASEAL® 1758-1F delivers a medium initial handling strength to hold the position of the bonded parts.
