DuPont
Hytrel® 6356
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Fuel Tanks, Wire & Cable Applications, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment
Density: 1220.0 - 1220.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 290.0 - 290.0 MPa
Hytrel® 6356 is a medium modulus grade with nominal hardness of 63D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, mandrels, wire and cable, film, profiles, seals, gears, sprockets, fuel tanks, containers with good permeation resistance to gases and liquids.
DuPont
Hytrel® 7246
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Thermoforming, Extrusion, Sheet, Plaques & Profiles Extrusion, Film Extrusion, Casting, Injection Molding
End Uses: Hoses, SRS Pretensioner, Automotive Safety Retractor, Cable Jacketing, SRS Airbag, SRS Actuator, Sporting Goods, Electrical/Electronic Applications, Office Automation Equipment, Automotive Safety, Cast Films, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, SRS Adjuster, SRS Seatbelt, Connectors, Monofilaments, Film, Safety Restrain System, EV Charger, Automotive Safety Pushbutton, Thermoforming Applications, Tubing, SRS Pillar Loop, Wire & Cable Applications, Safety Equipment, Signal Cord
Density: 1260.0 - 1260.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 550.0 - 550.0 MPa
Hytrel® 7246 is a high modulus grade with nominal hardness of 72D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.The 72 Shore D hardness is based on a legacy method and is still used for grade identification purposes.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.
DuPont
Hytrel® 5556
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Coating, Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Cast Films, Wire & Cable Applications, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Cable Jacketing, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment
Density: 1190.0 - 1190.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 190.0 - 190.0 MPa
Hytrel® 5556 is a medium modulus Hytrel® grade with nominal durometer hardness of 55D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, wire and cable, film and sheeting, belting.
DuPont
Hytrel® 4556
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating
End Uses: Belts/Belt Repair, Hoses, Cosmetic Packaging, Appliances, Crates, Automotive Applications, Containers, Cable Jacketing, Hose Jackets, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment, Cast Films
Density: 1140.0 - 1140.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 87.0 - 87.0 MPa
Hytrel® 4556 is a medium modulus grade with nominal hardness of 45D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.
DuPont
Hytrel® 3078
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Compounding, Calendering, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating
End Uses: Cosmetic Packaging, Appliances, Automotive Applications, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment, Cast Films, Wire & Cable Applications
Density: 1070.0 - 1070.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 27.0 - 27.0 MPa
Hytrel® 3078 is a very low modulus grade, with nominal hardness of 30D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Food compliance:Refer to Hytrel® 3078FGTypical applications:Compounding, extrusion, injection molded and over-molded parts for consumer use.
DuPont
Delrin® 577 BK000
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent
Flexural Modulus: 4600.0 - 4600.0 MPa
Delrin® 577 is a medium viscosity acetal homopolymer (Polyoxymethylene POM) containing 20% glass fiber filler for injection molding. It has very high stiffness, low warpage, and good creep resistance for superior performance at elevated temperature. It contains carbon black for improved weathering.
DuPont
Hytrel® 8238
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Cast Films, Wire & Cable Applications, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Connectors, Monofilaments, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment
Density: 1280.0 - 1280.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 1150.0 - 1150.0 MPa
Hytrel® 8238 is the highest modulus grade, with nominal hardness of 82D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Cubing, wire and cable, gears, sprockets, electrical connectors and oil field parts.
DuPont
Delrin® FG911DP NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 3300.0 - 3300.0 MPa
Delrin® FG911DP is a low viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage, and fewer voids. It has been developed for applications in contact with food.
DuPont
Hytrel® 5526
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Thermoforming, Injection Molding
End Uses: Cosmetic Packaging, Appliances, Thermoforming Applications, Automotive Applications, Electrical/Electronic Applications, Office Automation Equipment, Bearings
Density: 1190.0 - 1190.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 200.0 - 200.0 MPa
Hytrel® 5526 is a medium modulus Hytrel® grade with nominal durometer hardness of 55D. It contains non-discoloring stabilizer. It is specially recommended for injection molding applications requiring high flow properties.Typical applications:Seals, packing and gaskets; gears and bearings.
DuPont
Delrin® FG500MXD BLA090
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Sheet, Plaques & Profiles Extrusion, Injection Molding, Extrusion
Additives Included: Mold Release Agent
Flexural Modulus: 3400.0 - 3400.0 MPa
Delrin® FG500MXD is a metal- and X-ray-detectable medium viscosity acetal homopolymer for injection molding and extrusion. It has been developed for applications in contact with food. Detection limits need to be determined as a function of the detector and other process variables.
DuPont
Hytrel® 4056
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Compounding, Calendering, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating
End Uses: Cosmetic Packaging, Automotive Applications, Corrugated Pipe, Monofilaments, Cable Jacketing, Sporting Goods, Thermoforming Applications, Electrical/Electronic Applications, Office Automation Equipment, Wire & Cable Applications, Hoses
Density: 1160.0 - 1160.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 60.0 - 60.0 MPa
Hytrel® 4056 is a low modulus Hytrel® grade with nominal durometer hardness of 40D and with high impact resistance down to -40°C. It contains a non-discoloring stabilizer. It is recommended for extrusion and compounding.Typical applications:Hose and tubing, hose jackets, wire and cable jackets, film and sheeting, beltingand seals,.
DuPont
Hytrel® G4074
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Electrical/Electronic Applications, Cast Films, Wire & Cable Applications, Hoses, General Purpose, Cosmetic Packaging, Appliances, Automotive Applications, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Tubing
Density: 1180.0 - 1180.0 kg/m³
Strain at Break: 250.0 - 250.0 %
Flexural Modulus: 65.0 - 65.0 MPa
Hytrel® G4074 is a low modulus grade with nominal hardness of 40D. It contains discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, hose jackets, wire and cable jackets, film and sheeting, mouldedproducts. Not suited for light-colored finished products.
DuPont
Delrin® FG111DP NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 3000.0 - 3000.0 MPa
Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades. Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries. Delrin® FG111DP is a high viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage, and fewer voids. It has been developed for applications in contact with food.
DuPont
Hytrel® 5553FG NC010
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Coating, Extrusion, Film Extrusion, Thermoforming, Sheet, Plaques & Profiles Extrusion, Casting, Injection Molding
End Uses: Cosmetic Packaging, Appliances, Non Specific Food Applications, Thermoforming Applications
Density: 1200.0 - 1200.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Hytrel® 5553FG NC010 is a high performance thermoplastic polyester elastomer developed for applications in contact with food. This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.
DuPont
Hytrel® 4069
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating
End Uses: Hoses, Belts/Belt Repair, Cosmetic Packaging, Appliances, Automotive Applications, Corrugated Pipe, Film, Sporting Goods, Thermoforming Applications, Tubing, Office Automation Equipment, Cast Films, Wire & Cable Applications
Density: 1110.0 - 1110.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 45.0 - 45.0 MPa
Hytrel® 4069 is a low modulus grade with nominal hardness of 40D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.
DuPont
Hytrel® 4068FG
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Hoses, Cosmetic Packaging, Appliances, Non Specific Food Applications, Pipes, Corrugated Pipe, Film, Thermoforming Applications, Tubing, Wire & Cable Applications
Density: 1110.0 - 1110.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 47.0 - 47.0 MPa
Hytrel® 4068FG is a high performance thermoplastic polyester elastomer developed for applications in contact with food.This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.
DuPont
Hytrel® G3548 NC010
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Injection Molding, Extrusion
End Uses: Appliances, Automotive Applications, Film, Sporting Goods, Electrical/Electronic Applications, Office Automation Equipment, Cast Films, Wire & Cable Applications
Density: 1150.0 - 1150.0 kg/m³
Strain at Break: 190.0 - 190.0 %
Flexural Modulus: 25.0 - 25.0 MPa
Hytrel® G3548 is a low modulus grade with nominal hardness of 35D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.
DuPont
Hytrel® G4774
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Wire & Cable Applications, Jacketing, Hoses, General Purpose, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications
Density: 1190.0 - 1190.0 kg/m³
Strain at Break: 200.0 - 200.0 %
Flexural Modulus: 111.0 - 111.0 MPa
Hytrel® G4774 is a medium modulus grade with nominal hardness of 47D. It contains discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion. Typical applications: Hose and tubing, wire and cable jackets, film and sheeting, profiles and molded products. Not suited for light-colored finished products.
DuPont
Hytrel® 60LW
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Resin Transfer Molding, Casting, Injection Molding, Compounding, Calendering, Sheet, Plaques & Profiles Extrusion, Coating
End Uses: Cosmetic Packaging, Appliances, Automotive Applications, Thermoforming Applications, Electrical/Electronic Applications, Office Automation Equipment
Hytrel® 60LW is a Polyester Elastomer Concentrate Developed for Enhancing Abrasion and Wear Resistance
DuPont
Hytrel® 7246HS NC010
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Hoses, Cosmetic Packaging, Pipes, Automotive Applications, Corrugated Pipe, Monofilaments, Film, Thermoforming Applications, Tubing, Cast Films, Wire & Cable Applications
Density: 1250.0 - 1250.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 500.0 - 500.0 MPa
Hytrel® 7246HS NC010 is a high modulus, heat stabilized grade with nominal hardness of 72D.Typical applications:Tubing, wire and cable jackets, gears and sprockets, oil field parts.
DuPont
Hytrel® 4068
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Hoses, Cosmetic Packaging, Appliances, Pipes, Automotive Applications, Corrugated Pipe, Sporting Goods, Thermoforming Applications, Tubing, Office Automation Equipment, Cast Films, Wire & Cable Applications
Density: 1110.0 - 1110.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 45.0 - 45.0 MPa
Hytrel® 4068 is a low modulus Hytrel® grade with nominal durometer hardness of 40D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion. Typical applications:Molded products, hose and tubing, wire and cable jackets, film and sheeting, belting and seals.
DuPont
Hytrel® HTR8223 BK320
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating
End Uses: Bellows, Cosmetic Packaging, Automotive Applications, Constant Velocity Joint Boots, Containers, Bottles, Automotive Boots, Automotive Drivetrain, Film, Thermoforming Applications, Tubing, Automotive Bellows
Density: 1130.0 - 1130.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 79.0 - 79.0 MPa
Hytrel® HTR8223 BK320 is designed for blow molding or processing techniques requiring high melt viscosity. It has nominal hardness of 42D.Typical applications:Constant velocity joint boots.
DuPont
MULTIBASE™ AMB-12235
Function: Anti-Blocking Agent
Compatible Polymers & Resins: Polyethylenes (PE)
Carrier: Low-Density Polyethylene (LDPE), Resin-based
End Uses: Form Fill Seal Packaging, Cosmetic Packaging
Features: Low Wear, Low Friction, Slip
DuPont AMB-12235 MASTERBATCH is a pelletized formulation containing siloxane polymers and an antiblock agent dispersed in low density polyethylene (LDPE) blown film grade. It is designed to be used as an additive in polyethylene compatible systems to impart benefits such as processing improvements (ex: FFS: Form, fill and seal bagging process) and modification of surface characteristics (low coefficient of friction (COF)). This was developed especially to reach the best performance in plastomer skin layers in PE films. High-speed, high-volume FFS packaging operations place stresses on LDPE film, including increased levels of surface friction. Reducing COF is critical to seamless throughput, high productivity and consistent quality. DuPont AMB-12235 MASTERBATCH provides exceptional slip performance while overcoming the drawbacks of organics and controlling costs. Application Additive in polyethylene compatible systems.
DuPont
Delrin® 100KM NC000
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding
Fillers Included: Kevlar Fiber
Additives Included: Lubricant (Unspecified), Mold Release Agent
Flexural Modulus: 3000.0 - 3000.0 MPa
Delrin® 100KM NC000 is a high viscosity acetal homopolymer with Kevlar® aramid resin. It is designed for applications requiring low wear in abrasive environments.
DuPont
Crastin® 6130 NC010
Polymer Name: Polybutylene Terephthalate (PBT)
Processing Methods: Injection Molding, Extrusion, Coating, Sheet, Plaques & Profiles Extrusion
Crastin® 6130 NC010 is an unreinforced, medium/high viscosity polybutylene terephthalate resin for extrusion and injection molding.
DuPont
Hytrel® G4078 NC010
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Cosmetic Packaging, Appliances, Automotive Applications, Sporting Goods, Thermoforming Applications, Electrical/Electronic Applications, Office Automation Equipment
Density: 1180.0 - 1180.0 kg/m³
Strain at Break: 220.0 - 220.0 %
Hytrel® G4078 is a low modulus grade with nominal hardness of 40D. It contains non-discoloring stabilizer. It can be processed many conventional thermoplastic processing techniques like injection molding and extrusion.
DuPont
Delrin® 300CP BK602
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Sheet, Plaques & Profiles Extrusion, Injection Molding, Extrusion
Additives Included: Mold Release Agent
Delrin® 300CP is a medium-high viscosity acetal homopolymer with improved thermal stability and an outstanding balance of ease of processing and part performance. This black is formulated to maintain the mechanical properties of the natural.
DuPont
Hytrel® HTR8139BK
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Thermoforming, Blow Molding, Injection Molding
End Uses: Cosmetic Packaging, Film, Thermoforming Applications, Tubing, Automotive Applications, Containers, Bottles
Density: 1150.0 - 1150.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 87.0 - 87.0 MPa
Hytrel® HTR8139BK is designed for blow molding or processing techniques requiring high melt viscosity. It has nominal hardness of 44D, is pigmented black with fine particle size carbon black, and contains a general purpose stabilizer.Typical applications:Constant velocity joint boots.
DuPont
Hytrel® HTR8206
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Extrusion, Film Extrusion, Sheet, Plaques & Profiles Extrusion, Casting, Injection Molding
End Uses: Film, Appliances, Sporting Goods, Tubing, Office Automation Equipment
Density: 1190.0 - 1190.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 80.0 - 80.0 MPa
Hytrel® HTR8206 is a High Performance Polyester Elastomer with High Moisture Vapor Transmission Rate Developed for Extrusion and Injection Molding
DuPont
MULTIBASE™ HMB-6301
Function: Anti-Wear Agent, Slip Agent
Compatible Polymers & Resins: Polypropylenes (PP)
Carrier: Polypropylenes (PP), Resin-based
End Uses: Food Packaging, Food Wrap, Biaxially Oriented Film, Cosmetic Packaging, Form Fill Seal Packaging
Features: High Productivity, Low Wear, Good Stability, Low Friction, Slip, Good Processability
DuPont HMB-6301 Masterbatch is a pelletized formulation containing 25% ultra-high molecular weight (UHMW) siloxane polymer with polypropylene homopolymer (PPH). It is designed to be used as an additive in the skin layer of BOPP film and compatible systems to impart benefits such as processing improvements (FFS: Form, fill and seal bagging process) and modification of surface characteristics (Low coefficient of friction CoF). High-speed, high-volume form-fill-seal (FFS) packaging operations place stresses on BOPP film, including increased levels of surface friction. Reducing coefficient of friction (COF) is critical for seamless throughput, high productivity and consistent quality. DuPont HMB-6301 Masterbatch provides exceptional slip performance while overcoming the drawbacks of organics and controlling costs. Traditional organic slip additives, including erucamide and oleamide, rapidly migrate to the film surface and dissipate in a short period of time. Because they migrate so easily, they can transfer between film surfaces during rolling and storage, from one film layer to another and from film to package contents, increasing the risk of food contamination. They also lose effectiveness under elevated temperatures, such as exposure to hot foods.
DuPont
Hytrel® 5555HS
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
End Uses: Hoses, Cosmetic Packaging, Pipes, Automotive Applications, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Wire & Cable Applications
Density: 1190.0 - 1190.0 kg/m³
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 195.0 - 195.0 MPa
Hytrel® 5555HS is a medium modulus Hytrel® grade, with nominal durometer hardness of 55D. It is a specially stabilized version of Hytrel® 5556 for superior heat and oil resistance properties.Typical applications:Parts with increased heat-ageing stability and oil and grease resistance such as tubing and hose, wire and cable jackets, film and sheeting, belting. Precautions:Contains a discoloring antioxidant. Not suited for light-colored finished products.
DuPont
Hytrel® HTR8888 BK190
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Extrusion, Thermoforming, Blow Molding, Injection Molding
End Uses: Cosmetic Packaging, Automotive Air Management Line, Thermoforming Applications, Automotive Applications, Air Ducts
Strain at Break: 3001.0 - 3001.0 %
Flexural Modulus: 207.0 - 207.0 MPa
Hytrel® HTR8888 BK190 is designed for blow molding or processing techniques requiring high melt viscosity. It has nominal hardness of 55D, is pigmented black with fine particle size carbon black, and contains a general purpose stabilizer.Typical applications:Hollow thin wall parts requiring a tough polymer with excellent flexibility and temperature properties such as automotive boots.