Products
DuPont
Zytel® ST801 NC010A
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Extrusion, Injection Molding
Zytel® ST801 NC010A is an unreinforced, super tough polyamide 66 for injection molding and extrusion. It offers outstanding impact resistance over a wide temperature and humidity range and high productivity.
DuPont
Zytel® 80G14AHS NC010
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent
Flexural Modulus: 4400.0 - 4400.0 MPa
Zytel® 80G14AHS NC010 is a 14% glass fiber reinforced, toughened, high flow, heat stabilized polyamide 66 resin. It offers outstanding performance in injection molding applications.
DuPont
Zytel® 70G33L NC010
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 9000.0 - 9000.0 MPa
Zytel® 70G33L NC010 is a 33% glass fiber reinforced polyamide 66 resin for injection molding.
DuPont
Zytel® FR7026V0F NC010
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent, Flame Retardant
Zytel® FR7026V0F NC010 is a flame retardant, heat stabilized, polyamide 66 resin for injection molding. It does not contain elemental phosphorous or heavy metals and uses an halogen free flame retardant package.
DuPont
Zytel® 70G30HSLR BK099
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 9000.0 - 9000.0 MPa
Zytel® 70G30HSLR BK099 is a 30% glass fiber reinforced, heat stabilized, hydrolysis-resistant polyamide 66 resin for injection molding.
DuPont
Zytel® HTN51G35EF BK083
Polymer Name: Polyphthalamide (PPA), Polyamide 6T/XT (PA 6T/XT)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Flexural Modulus: 11000.0 - 11000.0 MPa
Zytel® HTN51G35EF BK083 is a 35% glass-reinforced, heat stabilized, lubricated, hydrolysis-resistant high performance polyamide resin developed for electrical and electronics applications. It is also a PPA resin.
DuPont
Zytel® HTN52G35HSL BK083
Polymer Name: Polyphthalamide (PPA), Polyamide 6T/66 (PA 6T/66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Flexural Modulus: 10300.0 - 10300.0 MPa
Zytel® HTN52G35HSL BK083 is a 35% glass-reinforced, heat stabilized, lubricated high performance polyamide resin that can be molded in water heated molds. It is also a PPA resin.
DuPont
Zytel® 70G13HS1L NC010
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 4900.0 - 4900.0 MPa
Zytel® 70G13HS1L NC010 is a 13% glass fiber reinforced, heat stabilized polyamide 66 resin for injection molding.
DuPont
Zytel® 70G30HSLR NC010
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 9000.0 - 9000.0 MPa
Zytel® 70G30HSLR NC010 is a 30% glass fiber reinforced, heat stabilized, hydrolysis-resistant polyamide 66 resin for injection molding.
DuPont
Zytel® 103HSL NC010
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding, Extrusion, Coating
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 2800.0 - 2800.0 MPa
Zytel® 103HSL NC010 is a heat stabilized, lubricated polyamide 66 resin for injection molding.
DuPont
Zytel® 70G35EF NC010
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent
Flexural Modulus: 10000.0 - 10000.0 MPa
Zytel® 70G35EF NC010 is a 35% glass-reinforced polyamide 66 developed for electrical and electronics applications.
DuPont
Zytel® 70G50HSL NC010
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Flexural Modulus: 16000.0 - 16000.0 MPa
Zytel® 70G50HSL NC010 is a 50% Glass Reinforced, Heat Stabilized, Polyamide 66 Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be colored. The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed. Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.
DuPont
Zytel® HTNFR42G30NH BK337
Polymer Name: Polyphthalamide (PPA)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent, Flame Retardant
Flexural Modulus: 11000.0 - 11000.0 MPa
Zytel® HTNFR42G30NH BK337 is a 30% glass-reinforced, flame retardant high performance polyamide resin developed for improved reflow soldering performance in connector applications. It is also a PPA resin and it uses a non-halogenated flame retardant.
DuPont
Zytel® 101F NC010
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent
Flexural Modulus: 2800.0 - 2800.0 MPa
Zytel® 101F NC010 is an internally lubricated polyamide 66 resin for injection molding. It was developed for fast cycles and high productivity.
DuPont
Zytel® 73G15HSL BK363
Polymer Name: Polyamide 6 (PA 6)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 5600.0 - 5600.0 MPa
Zytel® 73G15HSL BK363 is a 15% glass fiber reinforced, heat stabilized, black polyamide 6 resin for injection molding.
DuPont
Zytel® HTN51G35HSL NC010
Polymer Name: Polyamide 6T/XT (PA 6T/XT), Polyphthalamide (PPA)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 10300.0 - 10300.0 MPa
Zytel® HTN51G35HSL NC010 is a 35% glass-reinforced, heat stabilized, lubricated, hydrolysis-resistant high performance polyamide resin. It is also a PPA resin.
DuPont
Zytel® HTN51LG50HSL BK083
Polymer Name: Polyamide 6T (PA 6T)
Processing Methods: Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 16500.0 - 16500.0 MPa
Zytel® HTN51LG50HSL BK083 is a 50% Long Glass Reinforced, PPA, Heat Stabilized, High Performance Polyamide
DuPont
Zytel® 70G35HSLRA4 BK267
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 10000.0 - 10000.0 MPa
Zytel® 70G35HSLRA4 BK267 is a 35% glass fiber reinforced, heat stabilized, hydrolysis-resistant polyamide 66 resin for injection molding. It has excellent flow characteristics.
DuPont
Zytel® FR50 BK505
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Lubricant (Unspecified), Flame Retardant
Flexural Modulus: 9500.0 - 9500.0 MPa
Zytel® FR50 BK505 is a 25% glass fiber reinforced, flame retardant polyamide 66 resin for injection molding.
DuPont
Zytel® HTN51G45HSL BK083
Polymer Name: Polyamide 6T/XT (PA 6T/XT)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Flexural Modulus: 13200.0 - 13200.0 MPa
Zytel® HTN51G45HSL BK083 is a 45% glass-reinforced, heat stabilized, lubricated, hydrolysis-resistant high performance polyamide resin.
DuPont
Zytel® 80G33HS1L NC010
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Injection Molding
Fillers Included: Glass Fiber
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 7500.0 - 7500.0 MPa
Zytel® 80G33HS1L NC010 is a 33% glass fiber reinforced heat stabilized polyamide 66 resin with outstanding impact resistance developed using DuPont Super Tough technology.