Company logo

Products

DuPont
Matching Product Categories
Plastics
Ready-to-Use Products
Elastomers
Color: Black
465 products found on DuPont.
With TDS
Hide Blends
Kalrez® 4079 product card banner

DuPont

Kalrez® 4079

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, Custom, Diaphragms, O-rings

Features: Good Mechanical Properties, High Temperature Resistance, Heat Aging Resistant, Low Compression Set, Good Thermal Stability, Chemical Resistant, General Purpose

End Uses: Semiconductor Applications, Pump Parts, Aircraft Applications

Color: Black

Kalrez® 4079 perfluoroelastomer parts are a low compression set product for general purpose use in O-rings, diaphragms, seals and other parts used in the chemical process and aircraft industries. It is a carbon black filled product with excellent chemical resistance, good mechanical properties, and outstanding hot air aging properties. It exhibits low swell in organic acids, inorganic acids and aldehydes, and has good response to temperature cycling effects. A maximum service temperature of 316°C (600°F) is suggested, with short excursions to higher temperatures possible. Kalrez® 4079 is not recommended for use in hot water/steam applications or in contact with certain hot aliphatic amines, ethylene oxide, or propylene oxide.

Kalrez® Spectrum™ 6375 product card banner

DuPont

Kalrez® Spectrum™ 6375

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, Custom, Diaphragms, O-rings, Valve Seats

Features: High Temperature Resistance, Good Thermal Stability, Chemical Resistant

End Uses: Valve Parts, Electrical Connectors, Logging While Drilling Tools, Semiconductor Applications, Ball Valves, Measurement While Drilling Tools, Valves, Electric Submersible Pump

Color: Black

Kalrez® Spectrum™ 6375 is designed to give outstanding performance in the widest possible range of chemicals and temperatures. Mixed streams, once a problem for many chemical processors, can now be handled by 6375, furthermore, the curing system also allows for a maximum service temperature of 275°C (525 °F) which translates to increased chemical resistance over all temperature ranges, especially if high temperature process excursions occur. This combination of chemical and thermal resistance provides advantages for chemical processors. Kalrez® Spectrum™ 6375 is a carbon black-filled product for general use in O-rings, seals, diaphragms and other parts specifically for the chemical process industry. This product has excellent broad chemical resistance, good mechanical properties, and outstanding hot-air aging properties. Kalrez® Spectrum™ 6375 is well suited for use in mixed process streams because of its excellent resistance to acids, bases, and amines. It is also recommended for use in hot water, steam, pure ethylene oxide and propylene oxide.

Zytel® 103hsl Bkb080 product card banner

DuPont

Zytel® 103HSL BKB080

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding, Extrusion, Coating

Flexural Modulus: 2800.0 - 2800.0 MPa

Zytel® 103HSL BKB080 is a heat stabilized, lubricated polyamide 66 resin for injection molding.

Zytel® 101l Bkb080 product card banner

DuPont

Zytel® 101L BKB080

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding, Extrusion

Flexural Modulus: 2800.0 - 2800.0 MPa

Zytel® 101L BKB080 is a lubricated polyamide 66 resin for injection molding.

Kalrez® Spectrum™ 7075 product card banner

DuPont

Kalrez® Spectrum™ 7075

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, Custom, Diaphragms, O-rings, Valve Seats

Features: Good Seal Force Retention, High Temperature Resistance, Low Compression Set, Good Thermal Stability, Chemical Resistant

End Uses: Flanges, Semiconductor Applications, Pump Parts, Hot Glue Delivery Nozzle, Valves, Valve Parts

Color: Black

Kalrez® perfluoroelastomer parts are the material of choice for mechanical seals, valves, flanges and other demanding chemical and hydrocarbon processing applications. Kalrez® Spectrum™ 7075 has enhanced physical properties including very low compression set and improved seal force retention. It is a carbon black-filled product utilizing proprietary cure chemistry. Its mechanical properties are designed for improved sealing performance in both high temperature environments and temperature cycling situations. Kalrez® Spectrum™ 7075 O-rings have a glossy finish. This product was developed specifically for the chemical and hydrocarbon industries to provide improved chemical and thermal resistance better than the industry standard set by Kalrez® 4079.

Hytrel® 6356 product card banner

DuPont

Hytrel® 6356

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion

End Uses: Fuel Tanks, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Cables, Automotive Applications, Corrugated Pipe, Monofilaments, Sporting Goods, Thermoforming Applications, Wires, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1220.0 - 1220.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 290.0 - 290.0 MPa

Hytrel® 6356 is a medium modulus grade with nominal hardness of 63D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Hose and tubing, mandrels, wire and cable, film, profiles, seals, gears, sprockets, fuel tanks, containers with good permeation resistance to gases and liquids.

Betaprime® 5405 Uv product card banner

DuPont

BETAPRIME® 5405 UV

Ready to Use Product Type: Primer

Compatible Substrates & Surfaces: Polyolefins, Painted Surfaces, Plastics

Features: Improved Adhesion

Chemical Family: Isocyanates

BETAPRIME® 54051JV is a primer containing UV trace with short and long open time. Compatibility with pretreated polyolefins and SMC substrates.

Betaseal® Xpress 30 product card banner

DuPont

BETASEAL® Xpress 30

Ready to Use Product Type: Structural Adhesive, 1K (1 component) Adhesive

BETASEAL® Xpress30 is a single component, high modulus non-conductive adhesive with Reinforced Polyisotropic Micro-network (RPM) technology for high initial green strength that enables rapid crosslinking to speed bonding, allowing faster minimum drive-away times. BETASEAL® Xpress30 is a cold applied, high modulus and non-conductive (enhances vehicle's structural integrity / passenger comfort with reduced road noise, while reducing GPS / phone / HUD / defroster connection interference). BETASEAL® Xpress30 has industry-leading ease of use application, tooling, decking performance, short cut-off string, crash proven 30 minute minimum drive-away time down to 0°F.

Betaprime® 5433 product card banner

DuPont

BETAPRIME® 5433

Ready to Use Product Type: Primer

Compatible Substrates & Surfaces: Polycarbonate (PC), Plastics

Features: Improved Adhesion

Chemical Family: Sulfur-based Compounds

BETAPRIME® 5433 is an adhesion-promoting primer for painted and plastic substrates with short and long open time. It is to be used in combination with DuPont Adhesives PUR-Adhesive/sealants. All DuPont Adhesives products are primarily developed in co-operation with the automobile manufacturers, according to their needs and their specifications, they are approved for the specific applications as defined by the customer. The use of the product other than approved appliction have to be released in written form by the Technical Service of DuPont Adhesives.

Delrin® 500p Bk602 product card banner

DuPont

Delrin® 500P BK602

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3000.0 - 3000.0 MPa

Delrin® 500P is a general purpose medium viscosity acetal homopolymer for injection molding. It has improved processing thermal stability, and a good combination of mechanical properties.

Delrin® 577 Bk000 product card banner

DuPont

Delrin® 577 BK000

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent

Flexural Modulus: 4600.0 - 4600.0 MPa

Delrin® 577 is a medium viscosity acetal homopolymer (Polyoxymethylene POM) containing 20% glass fiber filler for injection molding. It has very high stiffness, low warpage, and good creep resistance for superior performance at elevated temperature. It contains carbon black for improved weathering.

Betaseal® 1766 Eu product card banner

DuPont

BETASEAL® 1766 EU

Ready to Use Product Type: Solvent free (100% Solids) Adhesive, Structural Adhesive, 1K (1 component) Adhesive

Compatible Substrates & Surfaces: Painted Surfaces, Glass

Cure Method: Moisture Cure

Application Method: Pneumatic Gun

Chemical Family: Polyurethanes (PU)

BETASEAL® 1766 EU is a high viscosity, high modulus, glass bonding adhesive that can be used primerless to paint and glass. Due to its chemistry, it delivers a high initial handling strength to hold the position of the bonded parts. It is a one component, ambient moisture curing, solvent free adhesive for direct glazing applications. It shows excellent sag and bead stability. Skin formation and curing are dependent on humidity, temperature and application dimension.

Crastin® Hr5330hfs Bk591 product card banner

DuPont

Crastin® HR5330HFS BK591

Polymer Name: Polybutylene Terephthalate (PBT), Thermoplastic Polyester

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent, Impact Modifier, Hydrolysis Stabilizer

Crastin® HR5330HFS BK591 is a 30% Glass Reinforced Polybutylene Terephthalate with high flow, moderately toughened, and hydrolysis-resistant (HR) for injection molding.

Kalrez® 6230 product card banner

DuPont

Kalrez® 6230

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, O-rings

Features: Low Contamination From Extractables, Chemical Resistant, Good Steam Cycling Resistance

End Uses: Semiconductor Applications, O Rings

Color: Black

Kalrez® 6230/6230A* perfluoroelastomer parts are a black product that provide superior chemical resistance and low contamination from extractables in pharmaceutical and food handling applications where FDA compliance is required. Kalrez® 6230/6230A parts are especially suited for Water for Injection (WFI) systems, Steam-in-Place (SIP) cleaning and other critical systems. Kalrez° 6230/6230A parts are thermally stable up to 260°C (500°F), permitting them to be used in Stage II Sterilization processes, where other elastomers lose their sealing ability.

Zytel® 70g30hslr Bk099 product card banner

DuPont

Zytel® 70G30HSLR BK099

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 9000.0 - 9000.0 MPa

Zytel® 70G30HSLR BK099 is a 30% glass fiber reinforced, heat stabilized, hydrolysis-resistant polyamide 66 resin for injection molding.

Kalrez® Spectrum™ 7375 product card banner

DuPont

Kalrez® Spectrum™ 7375

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals

Features: Good Compressive Strength, Good Mechanical Properties, Good Retention of Properties

End Uses: Semiconductor Applications, Pump Parts

Color: Black

Kalrez® Spectrum™ 7375 perfluoroelastomer parts are an innovative FFKM product based on a patented crosslinking system for chemical process industry applications where broad chemical and water/steam resistance are needed at elevated temperatures. Kalrez® Spectrum™ 7375 parts exhibit excellent compression set resistance, outstanding physical property retention, and good mechanical strength properties. A maximum application temperature of 300°C is suggested.

Betaseal® 15700 product card banner

DuPont

BETASEAL® 15700

Ready to Use Product Type: Structural Adhesive, 1K (1 component) Adhesive

Compatible Substrates & Surfaces: Glass

Chemical Family: Polyurethanes (PU)

BETASEAL® 15700 is a primerless to paint, one-component urethane adhesive.

Betaseal® 8000-1f product card banner

DuPont

BETASEAL® 8000-1F

Ready to Use Product Type: Structural Adhesive, 1K (1 component) Adhesive

Compatible Substrates & Surfaces: Glass

Cure Method: Moisture Cure

Chemical Family: Polyurethanes (PU)

BETASEAL® 8000-1F is a one-component, moisture-curing adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions._x005F _x005F BETASEAL® 8000-1F is a cold processable, medium viscosity, low modulus adhesive with excellent UV stability attributes. It is primerless to paint on automotive paints.

Zytel® 73g30hsl Bk416 product card banner

DuPont

Zytel® 73G30HSL BK416

Polymer Name: Polyamide 6 (PA 6)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Flexural Modulus: 8500.0 - 8500.0 MPa

Zytel® 73G30HSL BK416 is a 30% glass fiber reinforced, heat stabilized polyamide 6 for injection molding.

Crastin® Lw9320 Bk851 product card banner

DuPont

Crastin® LW9320 BK851

Polymer Name: PBT/SAN Alloy

Processing Methods: Injection Molding

Density: 1340.0 - 1340.0 kg/m³

Flexural Modulus: 7000.0 - 7000.0 MPa

Crastin® LW9320 BK851 is a 20% glass fiber reinforced polybutylene terephthalate blend for injection molding. It has improved surface aesthetics, excellent dimensional stability and low warpage characteristics.

Rynite® 935 Bk505 product card banner

DuPont

Rynite® 935 BK505

Polymer Name: Polyethylene Terephthalate (PET), Thermoplastic Polyester

Processing Methods: Injection Molding

Fillers Included: Glass Fiber, Mica

Flexural Modulus: 9300.0 - 9300.0 MPa

Rynite® 935 BK505 is a 35% mica/glass-reinforced modified polyethylene terephthalate resin with low warpage and excellent electrical properties.

Zytel® Htn51g35ef Bk083 product card banner

DuPont

Zytel® HTN51G35EF BK083

Polymer Name: Polyphthalamide (PPA), Polyamide 6T/XT (PA 6T/XT)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Flexural Modulus: 11000.0 - 11000.0 MPa

Zytel® HTN51G35EF BK083 is a 35% glass-reinforced, heat stabilized, lubricated, hydrolysis-resistant high performance polyamide resin developed for electrical and electronics applications. It is also a PPA resin.

Betaseal® 1758-1f product card banner

DuPont

BETASEAL® 1758-1F

Ready to Use Product Type: Structural Adhesive, Solvent free (100% Solids) Adhesive, 1K (1 component) Adhesive

Compatible Substrates & Surfaces: Glass

Cure Method: Moisture Cure

Chemical Family: Polyurethanes (PU)

BETASEAL® 1758-1F is a one-component, moisture-curing, solvent-free adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions._x005F BETASEAL® 1758-1F is a warm and cold processable, high viscosity, medium modulus, glass bonding adhesive that can be used primerless on paint. Warm application of BETASEAL® 1758-1F delivers a medium initial handling strength to hold the position of the bonded parts.

Betaseal® 15709 product card banner

DuPont

BETASEAL® 15709

Ready to Use Product Type: Structural Adhesive, 1K (1 component) Adhesive

Chemical Family: Polyurethanes (PU)

BETASEAL® 15709 is a primerless to paint, one-component urethane adhesive.

Delrin® 500t Bk602 product card banner

DuPont

Delrin® 500T BK602

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2100.0 - 2100.0 MPa

Delrin® 500T is a toughened, medium viscosity acetal homopolymer resin for injection molding with impact resistance similar to Delrin® 100. It can be used in parts requiring noise reduction.

Zytel® Htn52g35hsl Bk083 product card banner

DuPont

Zytel® HTN52G35HSL BK083

Polymer Name: Polyphthalamide (PPA), Polyamide 6T/66 (PA 6T/66)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Flexural Modulus: 10300.0 - 10300.0 MPa

Zytel® HTN52G35HSL BK083 is a 35% glass-reinforced, heat stabilized, lubricated high performance polyamide resin that can be molded in water heated molds. It is also a PPA resin.

Betaprime® 5402 product card banner

DuPont

BETAPRIME® 5402

Ready to Use Product Type: Primer

Compatible Substrates & Surfaces: Plastics

Features: Improved Adhesion

BETAPRIME® 5402 is an adhesion-promoting primer for painted and plastic substrates with short open time. BETAPRIME® 5402 is to be used in combination with DuPont Adhesives PUR-Adhesive/sealants. All DuPont Adhesives products are primarily developed in co-operation with the automobile manufacturers, according to their needs and their specifications, they are approved for the specific applications as defined by the customer. The use of the product other than approved appliction have to be released in written form by the Technical Service of DuPont Adhesives.

Rynite® Fr533nh Bk507 product card banner

DuPont

Rynite® FR533NH BK507

Polymer Name: Polyethylene Terephthalate (PET), Thermoplastic Polyester

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Flame Retardant

Flexural Modulus: 13100.0 - 13100.0 MPa

Rynite® FR533NH BK507 is a 33% glass-reinforced, modified polyethylene terephthalate resin using a non-halogenated flame retardant.

Betaseal® 1815-1f product card banner

DuPont

BETASEAL® 1815-1F

Ready to Use Product Type: Structural Adhesive, 1K (1 component) Adhesive

Compatible Substrates & Surfaces: Glass

Cure Method: Moisture Cure

Chemical Family: Polyurethanes (PU)

BETASEAL® 1815-1F is a one-component, moisture-curing, solvent-free adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions. BETASEAL® 1815-1F is a warm and cold processable, high viscosity, medium modulus, glass bonding adhesive that can be used primerless on paint. Warm application of BETASEAL® 1815-1F delivers a medium initial handling strength to hold the position of the bonded parts.

Betaprime® 5500 product card banner

DuPont

BETAPRIME® 5500

Ready to Use Product Type: Primer, 1K (1 component) Coating

Compatible Substrates & Surfaces: Glass

Features: Improved Adhesion

Chemical Family: Metallic Salts

BETAPRIME® 5500 is a one-step primer with short open time which can be used without silane wipe pretreatment. It is an adhesion-promoting primer for laminated glass with enamel layer inside and enamel substrates. BETAPRIME® 5500 is to be used in combination with DuPont Adhesives PUR-Adhesive/sealants. All DuPont Adhesives products are primarily developed in co-operation with the automobile manufacturers, according to their needs and their specifications, they are approved for the specific applications as defined by the customer. The use of the product other than approved appliction have to be released in written form by the Technical Service of DuPont Adhesives.

Betaseal® 1001 Em product card banner

DuPont

BETASEAL® 1001 EM

Ready to Use Product Type: Structural Adhesive, 1K (1 component) Adhesive

Compatible Substrates & Surfaces: Glass

Cure Method: Moisture Cure

Application Method: Pneumatic Gun

Chemical Family: Polyurethanes (PU)

BETASEAL® 1001 EM is a medium viscosity, high modulus, non conductive, fast curing glass bonding adhesive which requires a primer during the process. It is a one component, ambient moisture curing adhesive for direct glazing applications. It shows excellent sag and bead stability. Skin formation and curing are dependent on humidity, temperature and application dimension. BETASEAL® 1001 EM has a 3 hour Safe-Drive-Away-Time, crash tested to FMVSS 212 specification with twin airbags.

Betaseal® 15506kn product card banner

DuPont

BETASEAL® 15506KN

Ready to Use Product Type: Structural Adhesive, 1K (1 component) Adhesive

Compatible Substrates & Surfaces: Glass

Cure Method: Moisture Cure

Chemical Family: Polyurethanes (PU)

BETASEAL® 15506KN is a one-component, moisture-curing adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions. BETASEAL® 15506KN is a cold processable, high viscosity, medium modulus, fast-curing glass bonding adhesive that can be used primerless on paint.

Betalink® K1 product card banner

DuPont

BETALINK® K1

Ready to Use Product Type: 1K (1 component) Adhesive

Compatible Substrates & Surfaces: Composites, Painted Surfaces, Plastics

Cure Method: Moisture Cure

Chemical Family: Polyurethanes (PU)

BETALINK® K1 is a one-component, elastic and moisture-curing polyurethane-based adhesive. It is a high-elastic adhesive for plastics, composites and paints and can be bonded to themselves or in combination. BETALINK® K1 can be used for spoiler-bonding applications and is for this application TUV-approved.

Betaprime® 5404 product card banner

DuPont

BETAPRIME® 5404

Ready to Use Product Type: Primer

Compatible Substrates & Surfaces: Plastics

Features: Improved Adhesion

BETAPRIME® 5404 is an adhesion-promoting primer for painted and plastic substrates with a short open time. BETAPRIME® 5404 is to be used in combination with DuPont Adhesives PUR-Adhesive/sealants. All DuPont Adhesives products are primarily developed in co-operation with the automobile manufacturers, according to their needs and their specifications, they are approved for the specific applications as defined by the customer. The use of the product other than approved appliction have to be released in written form by the Technical Service of DuPont Adhesives.

Multiflex® A 1004 Bz 4775 N0200 Compounded Rubber In Primary Form product card banner

DuPont

Multiflex® A 1004 BZ 4775 N0200 Compounded Rubber In Primary Form

Polymer Name: Styrenic Thermoplastic Elastomer

Processing Methods: Injection Molding, Extrusion

Tear Strength: 46.0 - 46.0 kN/m

Strain at Break: 550.0 - 550.0 %

Multiflex® A1004 B Z4775 N0200 is designed for use in injection molding/extrusion.

Kalrez® 0090 product card banner

DuPont

Kalrez® 0090

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, O-rings, Valve Seats

Features: High Modulus, Durable, Good Thermal Stability, High Hardness, Chemical Resistant

End Uses: Semiconductor Applications, Pump Parts, Valves, O Rings, Valve Parts

Color: Black

Kalrez® 0090 perfluoroelastomer parts deliver durable, reliable sealing solutions for applications requiring excellent rapid gas decompression (RGD) properties as well as high hardness, high modulus properties, and excellent extrusion resistance (even without backup rings). Potential oil and gas applications include downhole equipment such as drilling and completion tools, as well as industrial equipment including pumps, valves and compressors. Kalrez® 0090 has been certified by two independent laboratories to meet rigorous requirements for resistance to RGD. In addition to demonstrated RGD resistance, Kalrez® 0090 seals provide superior performance in regard to chemical and temperature properties. Chemical resistance: Kalrez® 0090 is resistant to chemicals encountered in the oil and gas industry, including sour process streams containing H2S. Broad temperature capability: Kalrez® 0090 retains good physical properties up to temperatures as high as 250°C (482°F) and down to 21°C (5.8°F). Under pressurized conditions, in laboratory tests, Kalrez® 0090 has demonstrated low temperature performance down to 40°C (40°F).