Company logo

Products

DuPont
Search:
74 products found on DuPont
Matching Product Categories
Plastics
Elastomers
Ready-to-Use Products
Labeling Claims: Food Contact Acceptable
With TDS
With SDS
Delrin® Fg911dp Nc010 product card banner

DuPont

Delrin® FG911DP NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3300.0 - 3300.0 MPa

Delrin® FG911DP is a low viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage, and fewer voids. It has been developed for applications in contact with food.

Delrin® Fg500mxd Bla090 product card banner

DuPont

Delrin® FG500MXD BLA090

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Sheet, Plaques & Profiles Extrusion, Injection Molding, Extrusion

Additives Included: Mold Release Agent

Flexural Modulus: 3400.0 - 3400.0 MPa

Delrin® FG500MXD is a metal- and X-ray-detectable medium viscosity acetal homopolymer for injection molding and extrusion. It has been developed for applications in contact with food. Detection limits need to be determined as a function of the detector and other process variables.

Delrin® Fg111dp Nc010 product card banner

DuPont

Delrin® FG111DP NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3000.0 - 3000.0 MPa

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades. Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries. Delrin® FG111DP is a high viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage, and fewer voids. It has been developed for applications in contact with food.

Hytrel® 5553fg Nc010 product card banner

DuPont

Hytrel® 5553FG NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Coating, Extrusion, Film Extrusion, Thermoforming, Sheet, Plaques & Profiles Extrusion, Casting, Injection Molding

End Uses: Cosmetic Packaging, Appliances, Non Specific Food Applications, Thermoforming Applications

Density: 1200.0 - 1200.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Hytrel® 5553FG NC010 is a high performance thermoplastic polyester elastomer developed for applications in contact with food. This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Hytrel® 4068fg product card banner

DuPont

Hytrel® 4068FG

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Hoses, Cosmetic Packaging, Appliances, Non Specific Food Applications, Pipes, Corrugated Pipe, Film, Thermoforming Applications, Tubing, Wire & Cable Applications

Density: 1110.0 - 1110.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 47.0 - 47.0 MPa

Hytrel® 4068FG is a high performance thermoplastic polyester elastomer developed for applications in contact with food.This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Zytel® Htnfg52g35hsl Bk011 product card banner

DuPont

Zytel® HTNFG52G35HSL BK011

Polymer Name: Polyphthalamide (PPA), Polyamide 6T/66 (PA 6T/66)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Lubricant (Unspecified)

Zytel® HTNFG52G35HSL BK011 is a 35% glass reinforced, lubricated, heat stabilized high performance polyamide resin, developed for consideration into applications for the food industry. It is also a PPA resin.This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Molykote® P-1900 Fm Anti-seize Paste product card banner

DuPont

MOLYKOTE® P-1900 FM Anti-Seize Paste

Ready to Use Product Type: Anti-sieze Compound

Application Areas: Food Processing

Compatible Substrates & Surfaces: Nickel, Carbide, Plastics, Iron, Brass, Titanium, Aluminum, Metal, Steel, Fiberglass, Stainless Steel, Glass, Copper, Elastomers & Rubbers

Features: Wash-Off Resistance, Effective Load Builder, Food Contact Acceptable, Water Resistant

Chemical Family: Aluminum Compounds, Aluminum Complexes, Mineral Oils

Molykote® P-1900 Food Machinery Anti-Seize Paste is a mineral oil-based anti-seize paste fortified with a synergistic combination of solid lubricants that meets FDA regulations 21 CRF 178.3570 and NSF H1 classification for incidental food contact. Molykote® P-1900 Paste offers excellent low coefficient of friction and high load carrying capacity.

Delrin® Fg100p Nc010 product card banner

DuPont

Delrin® FG100P NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2600.0 - 2600.0 MPa

Delrin® FG100P is a high viscosity acetal homopolymer for use in easy-to-fill molds. It provides a great combination of toughness and strength, and improved processing thermal stability and productivity for injection molding. It has been developed for applications in contact with food. This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Zytel® Fg50 Nc010 product card banner

DuPont

Zytel® FG50 NC010

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding, Extrusion, Film Extrusion, Coating, Sheet, Plaques & Profiles Extrusion, Casting

Zytel® FG50 is an unreinforced, high viscosity polyamide 66 for injection molding and extrusion. It has improved break resistance for thick-walled parts. It has been developed for consideration into applications such as parts for the food industry.This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Delrin® Fg500p Nc010 product card banner

DuPont

Delrin® FG500P NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2900.0 - 2900.0 MPa

Delrin® FG500P is a general purpose medium viscosity acetal homopolymer for injection molding. It has improved processing thermal stability and a good combination of mechanical properties. It has been developed for applications in contact with food. This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Delrin® Pc652 Nc010 product card banner

DuPont

Delrin® PC652 NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2800.0 - 2800.0 MPa

Delrin® PC652 is a medium viscosity acetal homopolymer, with an advanced system of lubricants. It is developed for parts requiring low wear, low friction and low squeak noise for the healthcare industry.PREMIUM CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI and US FDA drug and device master files (DMF and MAF) have been established.

Hytrel® Sc969 Nc010 product card banner

DuPont

Hytrel® SC969 NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Pumps, Drug Delivery Pens, Wound Dressings, Prosthetics, Medical/Healthcare Applications, Fluid Handling, Valves, Surgical Instruments

Density: 1220.0 - 1220.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Hytrel® SC969 NC010 is a medium modulus grade with nominal hardness of 63D, contains a non-discoloring stabilizer and can be processed by various thermoplastic processing techniques. Developed for applications such as parts for the healthcare industry.SPECIAL CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI.

Zytel® Sc310 Nc010 product card banner

DuPont

Zytel® SC310 NC010

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent

Flexural Modulus: 2800.0 - 2800.0 MPa

Zytel® SC310 NC010 is a lubricated polyamide 66 resin for injection molding. It has been developed for consideration into applications such as parts for the healthcare industry.SPECIAL CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI.

Hytrel® 8238hs Ncb010 product card banner

DuPont

Hytrel® 8238HS NCB010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Film Extrusion, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Appliances, Automotive Applications, Power/Other Tools, Oil/Gas Applications, Industrial Applications, Furniture, Sporting Goods, Electrical/Electronic Applications, Wire & Cable Applications, Gears

Strain at Break: 250.0 - 250.0 %

Flexural Modulus: 1040.0 - 1040.0 MPa

Common features of Hytrel® thermoplastic polyester elastomer include mechanical and physical properties such as exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures. In addition, it resists many industrial chemicals, oils and solvents. Special grades include heat stabilized, flame retardant, food contact compliant, blow molding and extrusion grades. Concentrates offered include black pigments, UV protection additives, heat stabilizers, and flame retardants. Hytrel® thermoplastic polyester elastomer is plasticiser free. The good melt stability of Hytrel® thermoplastic polyester elastomer normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-24 kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed. Hytrel® thermoplastic polyester elastomer typically is used in demanding applications in the automotive, fluid power, electrical/electronic, consumer goods, appliance and power tool, sporting goods, furniture, industrial and off-road transportation/equipment industry. Hytrel® 8238HS NCB010 is the highest modulus grade, with nominal hardness of 82D. It contains non-discoloring stabilizer and a cube blended heat stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion. Typical applications:

Delrin® Fg900p Nc010 product card banner

DuPont

Delrin® FG900P NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3000.0 - 3000.0 MPa

Delrin® FG900P is a general purpose low viscosity acetal homopolymer for multicavity and thin wall molding with improved processing thermal stability. It has been developed for applications in contact with food. This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Hytrel® 6359fg Nc010 product card banner

DuPont

Hytrel® 6359FG NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Extrusion, Film Extrusion, Sheet, Plaques & Profiles Extrusion, Casting, Injection Molding

End Uses: Appliances, Non Specific Food Applications

Density: 1220.0 - 1220.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Hytrel® 6359FG is a high performance thermoplastic polyester elastomer developed for applications in contact with food. This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions. Typical applications:Conveyor belts and tubing, containers with good permeation resistance to gases and liquids.

Delrin® Pc690 Nc010 product card banner

DuPont

Delrin® PC690 NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3000.0 - 3000.0 MPa

Delrin® PC690 is a low viscosity acetal homopolymer, developed for thin-walled parts requiring high precision molding in the healthcare industry.PREMIUM CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI and US FDA drug and device master files (DMF and MAF) have been established.

Hytrel® Htr8724 Bk320 product card banner

DuPont

Hytrel® HTR8724 BK320

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Blow Molding, Extrusion

End Uses: Appliances, Automotive Applications, Power/Other Tools, Automotive Bumpers, Suspension Jounce Bumpers, Automotive Suspension, Industrial Applications, Furniture, Sporting Goods, Suspension Strut Stoppers, Electrical/Electronic Applications, Shock Absorbers, Suspension Rebound Bumpers

Density: 1160.0 - 1160.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 110.0 - 110.0 MPa

Common features of Hytrel® thermoplastic polyester elastomer include mechanical and physical properties such as exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures. In addition, it resists many industrial chemicals, oils and solvents. Special grades include heat stabilized, flame retardant, food contact compliant, blow molding and extrusion grades. Concentrates offered include black pigments, UV protection additives, heat stabilizers, and flame retardants. Hytrel® thermoplastic polyester elastomer is plasticiser free. The good melt stability of Hytrel® thermoplastic polyester elastomer normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-24 kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed. Hytrel® thermoplastic polyester elastomer typically is used in demanding applications in the automotive, fluid power, electrical/electronic, consumer goods, appliance and power tool, sporting goods, furniture, industrial and off-road transportation/equipment industry. Hytrel® HTR8724 BK320 is a heat stable, plasticiser-free, high viscosity thermoplastic polyester elastomer designed for extrusion and blow molding processes. It has been developed for demanding applications such as automotive jounce bumpers.

Zytel® Fgfe5171 Nc010c product card banner

DuPont

Zytel® FGFE5171 NC010C

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Flexural Modulus: 9300.0 - 9300.0 MPa

Zytel® FGFE5171 NC010C is a 33% glass filled nylon 66 resin. It has been developed for consideration into applications such as parts for the food industry.This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Delrin® Sc699 Nc010 product card banner

DuPont

Delrin® SC699 NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3000.0 - 3000.0 MPa

Delrin® SC699 is a silicone lubricated low viscosity acetal homopolymer, developed for thin-walled parts requiring low wear and low friction and high precision molding in the healthcare industry.SPECIAL CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI.

Delrin® Fg311dp Nc010 product card banner

DuPont

Delrin® FG311DP NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Film Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding

Additives Included: Lubricant (Unspecified), Mold Release Agent

Flexural Modulus: 3100.0 - 3100.0 MPa

Delrin® FG311DP is a medium-high viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage and fewer voids. It has been developed for applications in contact with food. This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Zytel® Fg70g30hsr2 Bk309 product card banner

DuPont

Zytel® FG70G30HSR2 BK309

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent

Zytel® FG70G30HSR2 BK309 is a 30% Glass Reinforced, Heat Stabilized, Polyamide 66.

Molykote® G-0052 Fm White Ep Bearing Grease product card banner

DuPont

MOLYKOTE® G-0052 FM White EP Bearing Grease

Ready to Use Product Type: Grease

Application Areas: Gearboxes, Bearings, Slides, Chains

Compatible Substrates & Surfaces: Elastomers & Rubbers, Plastics

Features: Wash-Off Resistance, Anti-Wear Properties, Extreme Pressure Performance, Excellent Lubricity, Food Contact Acceptable

Chemical Family: Mineral Oils, Aluminum Compounds, Aluminum Complexes

Thickener Type: Aluminum Complex

MOLYKOTE® G-0052 FM White EP Bearing Grease is a Multi-purpose food grade grease.MOLYKOTE® G-0052 FM White EP Bearing Grease is a White bearing grease with high-performance lubricant designed for the food and beverage industry. It is a mineral based lubricant thickened with aluminum complex and fortified with EP additives. They are an excellent choice where NSF H1 status lubricant is required or when the product must be free of black particle contamination.

Molykote® 316 Silicone Release Spray product card banner

DuPont

MOLYKOTE® 316 Silicone Release Spray

Ready to Use Product Type: Release Lubricant

Application Areas: Valves

Compatible Substrates & Surfaces: Carbide, Brass, Titanium, Aluminum, Metal, Copper, Elastomers & Rubbers, Nickel

Features: Oxidation Resistant, Non Stick, Heat Stabilized, Good Release Properties, Low Volatility, Food Contact Acceptable

Chemical Family: Silicones

MOLYKOTE® 316 Silicone Release Spray is used as a release agent for many food and industrial applications.

Hytrel® Sc976 Nc010 product card banner

DuPont

Hytrel® SC976 NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion

End Uses: Cosmetic Packaging, Pumps, Drug Delivery Pens, Wound Dressings, Prosthetics, Medical/Healthcare Applications, Thermoforming Applications, Fluid Handling, Valves, Surgical Instruments

Density: 1260.0 - 1260.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 550.0 - 550.0 MPa

Hytrel® SC976 NC010 is a high modulus grade with nominal hardness of 72D, contains a non-discoloring stabilizer and can be processed by various thermoplastic processing techniques. Developed for applications such as parts for the healthcare industry.SPECIAL CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI.

Delrin® Fg150 Nc010 product card banner

DuPont

Delrin® FG150 NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Sheet, Plaques & Profiles Extrusion, Injection Molding, Extrusion

Additives Included: Mold Release Agent

Flexural Modulus: 2900.0 - 2900.0 MPa

Delrin® FG150 NC010 is a high viscosity acetal homopolymer specifically designed for extrusion processes. It has excellent thermal stability, low die deposit, and enhanced crystallization for low porosity. It has been developed for applications in contact with food. This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Hytrel® 3078 Bk176 product card banner

DuPont

Hytrel® 3078 BK176

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Film Extrusion, Casting, Blow Molding, Profile Extrusion, Injection Molding, Calendering, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Appliances, Automotive Applications, Power/Other Tools, Industrial Applications, Furniture, Sporting Goods, Electrical/Electronic Applications

Strain at Break: 300.0 - 300.0 %

Common features of Hytrel® thermoplastic polyester elastomer include mechanical and physical properties such as exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures. In addition, it resists many industrial chemicals, oils and solvents. Special grades include heat stabilized, flame retardant, food contact compliant, blow molding and extrusion grades. Concentrates offered include black pigments, UV protection additives, heat stabilizers, and flame retardants.Hytrel® thermoplastic polyester elastomer is plasticiser free. The good melt stability of Hytrel® thermoplastic polyester elastomer normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-24 kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed. Hytrel® thermoplastic polyester elastomer typically is used in demanding applications in the automotive, fluid power, electrical/electronic, consumer goods, appliance and power tool, sporting goods, furniture, industrial and off-road transportation/equipment industry. Hytrel® 3078 BK176 is a very low modulus grade, with nominal hardness of 30D. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.

Delrin® Fg511dp Nc010 product card banner

DuPont

Delrin® FG511DP NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3200.0 - 3200.0 MPa

Delrin® FG511DP is a medium viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage and fewer voids. It has been developed for applications in contact with food. This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Delrin® Pc691 Nc010 product card banner

DuPont

Delrin® PC691 NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3250.0 - 3250.0 MPa

Delrin® PC691 is a low viscosity acetal homopolymer with enhanced crystallization for faster cycle times and increased stiffness, developed for thin-walled parts requiring high precision molding in the healthcare industry.PREMIUM CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI and US FDA drug and device master files (DMF and MAF) have been established.

Hytrel® 4053fgf Nc010 product card banner

DuPont

Hytrel® 4053FGF NC010

Polymer Name: Thermoplastic Polyester Elastomer

Processing Methods: Extrusion, Casting, Injection Molding, Coating

Density: 1150.0 - 1150.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 60.0 - 60.0 MPa

Hytrel® 4053FGF is a low modulus high performance thermoplastic elastomer developed for applications in contact with food. It is suitable for extrusion and injection molding processes. This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.

Hytrel® Pc945 Nc010 product card banner

DuPont

Hytrel® PC945 NC010

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Calendering, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating

End Uses: Cosmetic Packaging, Pumps, Drug Delivery Pens, Wound Dressings, Prosthetics, Medical/Healthcare Applications, Thermoforming Applications, Fluid Handling, Valves, Surgical Instruments

Density: 1160.0 - 1160.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 64.0 - 64.0 MPa

Hytrel® PC945 is a low modulus grade with nominal durometer hardness of 40D. It contains a non-discoloring stabilizer and is recommended for injection and extrusion. It is developed for applications such as parts for the healthcare industry.PREMIUM CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI and FDA drug and device master files (DMF and MAF) have been established.

Delrin® Sc655 Nc010 product card banner

DuPont

Delrin® SC655 NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 2950.0 - 2950.0 MPa

Delrin® SC655 is a medium viscosity acetal homopolymer, developed for parts requiring high precision molding in the healthcare industry. SPECIAL CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI.

Delrin® Sc631 Nc010 product card banner

DuPont

Delrin® SC631 NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3100.0 - 3100.0 MPa

Delrin® SC631 is a medium-high viscosity acetal homopolymer, developed for parts requiring high precision molding in the healthcare industry. SPECIAL CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI.

Zytel® Fg70g30hsr3 Bk309 product card banner

DuPont

Zytel® FG70G30HSR3 BK309

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent

Flexural Modulus: 9500.0 - 9500.0 MPa

Zytel® FG70G30HSR3 BK309 is a 30% Glass Reinforced, Heat Stabilized, Polyamide 66

Zytel® Lcpa Sc315 Nc010 product card banner

DuPont

Zytel® LCPA SC315 NC010

Polymer Name: Polyamide 612 (PA 612)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent

Flexural Modulus: 2100.0 - 2100.0 MPa

Zytel® SC315 NC010 is an unreinforced, lubricated 612 polyamide suitable for injection molding. It has been developed for applications such as parts for the healthcare industry.SPECIAL CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI.

Delrin® Sc690 Nc010 product card banner

DuPont

Delrin® SC690 NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3000.0 - 3000.0 MPa

Delrin® SC690 is a low viscosity acetal homopolymer, developed for thin-walled parts requiring high precision molding in the healthcare industry.SPECIAL CONTROL for HEALTHCARE APPLICATIONSThis product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions. This product is also tested against ISO 10993-5 and -11 and selected parts of USP Class VI.