products
DuPont
Multiflex® G 62 A 21 B Z5219 N0200 (A) Thermoplastic Elastomer
Polymer Name: Styrenic Thermoplastic Elastomer
Processing Methods: Injection Molding, Extrusion
Tear Strength: 26.0 - 26.0 kN/m
Multiflex® Automotive G Range can be transformed between 190°C to 220–230°C. In this temperature range, materials are stable, above, thermal degradation occurs, resulting in yellowing and significant odor emanation.
DuPont
Multiflex® G 40 A 21 BT Z2811 N0081(A) Thermoplastic Elastomer
Polymer Name: Styrenic Thermoplastic Elastomer
Processing Methods: Injection Molding, Extrusion, Film Extrusion
Tear Strength: 20.0 - 20.0 kN/m
Strain at Break: 750.0 - 750.0 %
Compression Set (70 °C): 38.0 - 38.0 %
Multiflex® G 40 A 21 BT Z2811 N0081(A) Thermoplastic Elastomer by DuPont is comprised of Styrenic Thermoplastic Elastomer. It is commonly used It is available in Pellets form.
DuPont
Hytrel® 4556 BK320
Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)
Processing Methods: Thermoforming, Film Extrusion, Casting, Profile Extrusion, Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion, Coating
End Uses: Appliances, Automotive Applications, Power/Other Tools, Industrial Applications, Furniture, Sporting Goods, Electrical/Electronic Applications
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 90.0 - 90.0 MPa
Common features of Hytrel® thermoplastic polyester elastomer include mechanical and physical properties such as exceptional toughness and resilience, high resistance to creep, impact and flex fatigue, flexibility at low temperatures and good retention of properties at elevated temperatures. In addition, it resists many industrial chemicals, oils and solvents. Special grades include heat stabilized, flame retardant, food contact compliant, blow molding and extrusion grades. Concentrates offered include black pigments, UV protection additives, heat stabilizers, and flame retardants. Hytrel® thermoplastic polyester elastomer is plasticiser free. The good melt stability of Hytrel® thermoplastic polyester elastomer normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-24 kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed. Hytrel® thermoplastic polyester elastomer typically is used in demanding applications in the automotive, fluid power, electrical/electronic, consumer goods, appliance and power tool, sporting goods, furniture, industrial and off-road transportation/equipment industry. Hytrel® 4556 BK320 is a medium modulus grade with nominal hardness of 45D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.
DuPont
Delrin® 511DP NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Extrusion, Sheet, Plaques & Profiles Extrusion, Injection Molding
Additives Included: Mold Release Agent, Lubricant (Unspecified)
Flexural Modulus: 3200.0 - 3200.0 MPa
Delrin® 511DP is a medium viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage and fewer voids.
DuPont
TPSiV® 4000-75A SR Deep Sea Thermoplastic Elastomer
Polymer Name: Thermoplastic Silicone Vulcanizate (TPSiV), Thermoplastic Vulcanizate (TPV)
Processing Methods: Injection Molding, Extrusion
Density: 1100.0 - 1100.0 kg/m³
Tear Strength: 64.0 - 64.0 kN/m
Compression Set (70 °C): 70.0 - 70.0 %
TPSiV® 4000-75A SR thermoplastic elastomer is a UV stable material with good scratch resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.
DuPont
TPSiV® 4000-60A Natural Thermoplastic Elastomer
Polymer Name: Thermoplastic Silicone Vulcanizate (TPSiV), Thermoplastic Vulcanizate (TPV)
Processing Methods: Injection Molding, Extrusion
Density: 1100.0 - 1100.0 kg/m³
Tear Strength: 30.0 - 30.0 kN/m
Compression Set (70 °C): 87.0 - 87.0 %
TPSiV® 4000-60A SR thermoplastic elastomer is a UV stable material with excellent abrasion and scratch resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on smartphones, portable electronic cases and wearable electronic devices.
DuPont
TPSiV® 4000-50A BK024 Thermoplastic Elastomer
Polymer Name: Thermoplastic Silicone Vulcanizate (TPSiV), Thermoplastic Vulcanizate (TPV)
Processing Methods: Injection Molding, Extrusion
Density: 1100.0 - 1100.0 kg/m³
Tear Strength: 23.7 - 23.7 kN/m
Compression Set (70 °C): 75.6 - 75.6 %
TPSiV® 4000-50A SR thermoplastic elastomer is a UV stable material with excellent abrasion and scratch resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on smartphones, portable electronic cases and wearable electronic devices.
DuPont
Liveo™ BioMedical Grade LSR Q7-7870
Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)
Processing Methods: Injection Molding, Liquid Injection Molding, Extrusion
End Uses: Body Implants, Medical/Healthcare Applications, Medical Devices
Features: Autoclaved, Solventless, Consistent High Quality, High Gas Permeability, Platinum Catalyzed, Can be post cured, Pigmentable, Fast Curing, Non Blooming
Liveo™ Q7-7840 Liquid Silicone Rubber, Liveo™ Q7-7850 Liquid Silicone Rubber, and Liveo™ Q7-7870 Liquid Silicone Rubber are two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion.
DuPont
TPSiV® 4000-75A SR White Thermoplastic Elastomer
Polymer Name: Thermoplastic Silicone Vulcanizate (TPSiV), Thermoplastic Vulcanizate (TPV)
Processing Methods: Injection Molding, Extrusion
Density: 1100.0 - 1100.0 kg/m³
Tear Strength: 64.0 - 64.0 kN/m
Compression Set (70 °C): 70.0 - 70.0 %
TPSiV® 4000-75A SR thermoplastic elastomer is a UV stable material with good scratch resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.
DuPont
Liveo™ BioMedical Grade LSR Q7-4860
Polymer Name: Silicone Elastomer, Liquid Silicone Rubber (LSR)
Processing Methods: Extrusion, Injection Molding, Liquid Injection Molding
End Uses: Medical/Healthcare Applications, Medical Devices, Body Implants
Features: Autoclaved, High Gas Permeability, Platinum Catalyzed
Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are a series of two-part platinum-catalyzed silicone elastomers specifically designed for liquid injection molding or supported extrusion.Liveo™ BioMedical Grade Liquid Silicone Rubbers (7-6830, 7-6840, Q7-4840, Q7-4850, 7-4860, 7-4870 and 7-6860) are heat-cured elastomer raw materials for use by customers fabricating medical devices, including those intended for implantation in humans for less than 30 days.
DuPont
Vamac® Ultra DX for Compression Set
Polymer Name: Ethylene Acrylic Elastomer (AEM)
Processing Methods: Extrusion, Resin Transfer Molding, Injection Molding, Compression Molding
End Uses: Hoses, Cables, Wire & Cable Applications, Automotive Applications
Strain at Break: 250.0 - 250.0 %
Vamac® Ultra DX for Compression Set Ethylene Methylacrylate Elastomer (AEM) is heat stabilized or stable to heat used in demanding automotive applications, where excellent resistance to heat, engine and transmission fluids or Blow-By is required. DuPont’s latest manufacturing technology allows production of enhanced AEM grades that have significantly improved compared to the existing standard Vamac® elastomers. These grades, designated and sold as Vamac® Ultra, provide a step-change improvement in processability, performance and customer value for targeted applications, including for peroxide cure E/MA dipolymer grade with Vamac® Ultra DX (formerly VMX2122).
DuPont
TPSiV® 4000-50A GY025 Thermoplastic Elastomer
Polymer Name: Thermoplastic Silicone Vulcanizate (TPSiV), Thermoplastic Vulcanizate (TPV)
Processing Methods: Injection Molding, Extrusion
Density: 1100.0 - 1100.0 kg/m³
Tear Strength: 23.7 - 23.7 kN/m
Compression Set (70 °C): 75.6 - 75.6 %
TPSiV® 4000-50A SR thermoplastic elastomer is a UV stable material with excellent abrasion and scratch resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on smartphones, portable electronic cases and wearable electronic devices.
DuPont
Vamac® Ultra XF
Polymer Name: Ethylene Acrylic Elastomer (AEM)
Processing Methods: Extrusion, Resin Transfer Molding, Injection Molding, Compression Molding
End Uses: Wire & Cable Applications, Automotive Applications
Strain at Break: 300.0 - 300.0 %
Vamac® Ultra XF is an intermediate Mooney viscosity grade at 23 MU (ML1+4, 100°C), between Vamac® GXF (17.5 MU) and Vamac® Ultra HT (29 MU). This offering provides customers with a broader choice of ethylene-acrylic elastomers for applications such as Turbo Charger Hose, other hose applications, or applications where excellent resistance to dynamic flex fatigue is needed. Such applications typically suffer in flex fatigue resistance when polymer blends are used to achieve the optimum processing performance. The higher viscosity of Vamac® Ultra XF vs. Vamac® GXF results in slight improvements in Compression Set, Tensile and Elongation at Break. Compression Set according to VW PV3307 is especially improved. Heat ageing and fluid ageing performance is comparable to Vamac® GXF.
DuPont
MULTIPRO™ CELD0310R 25192
Applications: Building Materials, Wire & Cable, Pipes & Plumbing
Product Families: Thermoplastic Elastomers, Thermoplastic Olefin Elastomers (TPO)
Chemical Family: Polyolefins
Polymer Name: Thermoplastic Polyolefin (TPO)
End Uses: Pipe Extrusion Applications
DuPont MULTIPRO™ CELD0310R 25192 is a ready to use solution containing special long term low coefficient of friction technology to be extruded as innerlayer . This MDPE Compound is designed to be co-extruded as inner-layer of the duct or pipe.
DuPont
Zytel® LCPA FG151 NC010
Polymer Name: Polyamide 612 (PA 612)
Processing Methods: Injection Molding, Extrusion
Flexural Modulus: 2100.0 - 2100.0 MPa
Zytel® LCPA FG151 NC010 by DuPont is comprised of Polyamide 612. It is commonly used Zytel® LCPA FG151 NC010 is certified as EFfCI GMP Certified.
DuPont
Delrin® RA300CPE NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
Additives Included: Release agent
Delrin® RA300CPE is a medium-high viscosity acetal homopolymer with outstanding balance of ease of processing and part performance, and with very low VOC emissions. Delrin® RA300CPE provides optimum mechanical performance with its excellent combination of toughness and strength with improved processing, thermal stability and productivity for injection molding.
DuPont
TPSiV® 4000-75A SR Pale Gray Thermoplastic Elastomer
Polymer Name: Thermoplastic Silicone Vulcanizate (TPSiV), Thermoplastic Vulcanizate (TPV)
Processing Methods: Injection Molding, Extrusion
Density: 1100.0 - 1100.0 kg/m³
Tear Strength: 64.0 - 64.0 kN/m
Compression Set (70 °C): 70.0 - 70.0 %
TPSiV® 4000-75A SR thermoplastic elastomer is a UV stable material with good scratch resistance. It exhibits excellent bonding to polycarbonate, ABS and similar polar substrates. It is a product targeted for soft touch overmolding on wearable electronics, accessory cases for consumer electronics and flexible pipe connectors in potable water systems.
DuPont
Multiflex® G 50 A 21 BT Z2976 N0089(A) Thermoplastic Elastomer
Polymer Name: Styrenic Thermoplastic Elastomer
Processing Methods: Injection Molding, Extrusion, Film Extrusion
Tear Strength: 29.0 - 29.0 kN/m
Strain at Break: 550.0 - 550.0 %
Compression Set (70 °C): 24.0 - 24.0 %
Multiflex® G 50 A 21 BT Z2976 N0089 (A) is designed for use in injection molding/extrusion.
DuPont
Liveo™ Biomedical Grade ETR Elastomer Q7-4550
Polymer Name: Silicone Elastomer
Processing Methods: Resin Transfer Molding, Compression Molding, Calendering, Extrusion, Sheet, Plaques & Profiles Extrusion, Cable Extrusion
End Uses: Medical/Healthcare Applications, Medical Devices
Features: Heat Stabilized, Autoclaved, Consistent High Quality, Good Colorability, High Gas Permeability, Non-tacky surface, Pigmentable, Low Emissions, Blendable
Liveo™ BioMedical Grade ETR Elastomers (Q7 series) are a series of one-part uncatalyzed silicone elastomer raw materials.
DuPont
TPSiV® 4000-60A GFR
Applications: Appliances & Electronics, Devices & Assemblies, Consumer Electronics
Product Families: Thermoplastic Elastomers, Thermoplastic Vulcanizates (TPV)
Polymer Name: Thermoplastic Vulcanizate (TPV)
TPSiV® 4000-60A GFR is a soft elastomer designed to maintain color stability within the harshest environments. It offers a lasting defense against the distinct causes of gas fading, including NOx gas-based atmosphere pollutants and direct UV exposure.
DuPont
Delrin® RA511CPE NC010
Polymer Name: Polyacetal Homopolymer (POM)
Processing Methods: Injection Molding, Extrusion, Sheet, Plaques & Profiles Extrusion
Flexural Modulus: 3200.0 - 3200.0 MPa
Delrin® RA511CPE Is A Medium Viscosity Acetal Homopolymer With Enhanced Crystallization For Faster Cycle Times, Excellent Creep And Fatigue Resistance, And Very Low VOC Emissions. Delrin® RA511CPE Provides Improved Thermal Stability, Excellent Dimensional Stability, Low Warpage, Fewer Voids, And Improved Productivity For Injection Molding.
DuPont
Zytel® FG42A NC010
Polymer Name: Polyamide 66 (PA 66)
Processing Methods: Extrusion, Film Extrusion, Sheet, Plaques & Profiles Extrusion, Casting, Injection Molding, Coating
Additives Included: Mold Release Agent
Flexural Modulus: 2800.0 - 2800.0 MPa
Zytel® FG42A is a high viscosity polyamide 66 for injection molding and extrusion. It has improved break resistance for thick-walled parts. It has been developed for consideration into applications such as parts for the food industry.This product is manufactured according to Good Manufacturing Practice (GMP) principles and generally accepted in food contact applications in Europe and the USA when meeting applicable use conditions.
DuPont
Hytrel® HTR8801 NC020
Polymer Name: Thermoplastic Polyester Elastomer
Processing Methods: Extrusion, Film Extrusion, Sheet, Plaques & Profiles Extrusion
Strain at Break: 300.0 - 300.0 %
Flexural Modulus: 55.0 - 55.0 MPa
Hytrel® HTR8801 NC020 is a high viscosity, low modulus grade with improved heat, UV and hydrolysis resistance developed for extrusion applications.
DuPont
Zytel® FR95G25V0NH NC010
Polymer Name: Polyamide 66/6T (PA 66/6T)
Processing Methods: Injection Molding, Extrusion
Fillers Included: Glass Fiber
Additives Included: Flame Retardant
Flexural Modulus: 8500.0 - 8500.0 MPa
Zytel® FR95G25V0NH NC010 is a 25% glass fiber reinforced, flame retardant polyamide resin for injection molding. It is halogen and red phosphorous free, has high flow characteristics and.
DuPont
Liveo™ Biomedical Grade ETR Elastomer Q7-4535
Polymer Name: Silicone Elastomer
Processing Methods: Resin Transfer Molding, Compression Molding, Extrusion, Sheet, Plaques & Profiles Extrusion, Cable Extrusion
End Uses: Medical/Healthcare Applications, Medical Devices
Features: Autoclaved, Heat Stabilized, Consistent High Quality, High Gas Permeability, Good Colorability, Non-tacky surface, Pigmentable, Blendable, Low Emissions
Liveo™ BioMedical Grade ETR Elastomers (Q7 series) are a series of one-part uncatalyzed silicone elastomer raw materials.