Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
- Composition
Aluminum or clear polyurethane.
Features & Benefits
- Ready-to-Use Product Features
- Advantages
- It can be used as a primer for all Macrylex (MMA) based systems.
- Perdure UPr must be sued as a barrier primer applied in one or two coats as needed to achieve a pinhole-free finish when applying Macrylex over an existing epoxy basecoat.
- Excellent primer for a variety of surfaces.
- Barrier primer for applying Macrylex systems over epoxy.
- Superior wetting out properties over sound, rusty steel.
- Can be recoated in 1 to 2 hours and can be coated with most resinous coatings.
- Corrosion-resistant: Passes 12,000 hrs. in salt cabinet.
- Excellent high-temperature resistance.
Applications & Uses
- Markets
- Application Method
- Compatible Substrates & Surfaces
- Cure Method
- Special Conditions
- Do not apply over frost, wet/damp surfaces, or in very high humidity conditions.
- The clear formulation will yellow over time if used as a finish coat.
- Must be recoated within 24 hours.
- Seal partially used containers to prevent material from reacting with moisture in the air.
- Coverage
- Use on concrete or as a barrier coat (2 coats recommended): 250ft²/gal/coat
- Steel: 866ft² at 1 mil DFT
- Surface Preparation
Concrete:
- Shot blast or grind to a medium grit texture similar to 60 grit sandpaper or CSP-3.
- Steel: Sandblast to an SSPC SP6 “commercial” blast finish.
- When blasting is not appropriate, remove all loose rust and mill scale by power wire brushing or hand tool cleaning.
- A tightly adherent rusty surface is acceptable.
Galvanized Steel:
- New Brush blast per SSP - SP7.
- Old, weathered or rusty: Remove all oil, grease, dirt, and other foreign matter.
- The surface should be reasonably clean, dry, and free of contaminants.
- Remove all loose rust, etc., as outlined under steel.
- Previously Painted Surfaces: Remove all loose, peeling, or blistered paint and any other surface contaminants.
- Make sure the surface is sound and dry.
- Installation
- Mix Perdure UPr so that the aluminum pigment is thoroughly dispersed in the resin and uniform silver color is achieved.
- When using Perdure UPr over an extended period, stir occasionally to maintain uniform mixing of the material.
- It is applied with a 3/8” nap roller.
- Roller covers should have a phenolic core.
- Perdure UPr may be applied at temperatures between 25°F and 140°F.
- It cures to a tack-free in 1 - 2 hours and can be recoated in 2 to 24 hours at 75°F with 50% RH.
Properties
- Color
- Technical Data
Value | Units | Test Method / Conditions | |
Application Temperature (Dry) | 25 - 140 | °F | — |
Mixing Ratio (Mix Well) | Single Component | — | — |
Recoat (70°F, 50%RH) | 2 - 24 | hours | — |
Service Temperature (Dry) | max. 400 | °F | — |
Sheen | Low Gloss | — | — |
VOC (Compliant to High Temp Coating) | 356.0 | grams/liter | VOC Rule 1113 |
Working Life (70°f, 50%rh) | 1 - 2 | hours | — |
Packaging & Availability
- Packaging
- 1-gal
- 5-gal
Storage & Handling
- Caution
- Proper ventilation is necessary when coating indoors or in confined areas.
- Vapors and spray mist may cause eye/skin irritation as well as allergic reactions.
- Always wear protective clothing, goggles and use NIOSH-approved respirators.
- Combustible keep away from all sources of ignition.
- For industrial use only.
- Keep out of reach of children.
- Shelf Life
6 months in unopened containers stored below 90°F.