Products

Perdure UPr (Perdure Universal Primer) is one component, moisture-cured polyurethane primer. Perdure UPr has excellent adhesion to sound, lightly adhered rusty steel, other marginal or poorly prepared metal surfaces and properly prepared concrete. Perdure UPr undergoes a rapid molecular weight change as it polymerizes into a high molecular weight primer with excellent corrosion, abrasion and high-temperature resistance.

Perdure A03 is a clear acrylic emulsion formulated to create a clear, non-yellowing, protective coating. Perdure A03 provides a tough, UV and abrasion resistant film that protects surfaces from moisture penetration, staining, dirt, dust, wear, and provides a surface that is easy to clean and maintain. Perdure A03 is an excellent choice for both interior and exterior applications.

Dekguard is a non-yellowing, low gloss, siloxane-modified methyl methacrylate sealer for concrete surfaces. Dekguard's low viscosity allows better penetration over concrete for excellent protection. The unique formulation of Dekguard provides superior resistance to de-icing salts, saltwater pool systems, rain, sleet and snow as compared to other acrylic sealers.

CP1000 is all acrylic latex dispersion used as primer and additive for cementitious coatings like Skraffino, Arapido and Param SSL. CP1000 can be also used in semi-transparent stains.

Perdure E10 is a 100% solids, multipurpose epoxy binder for Düraamen self-leveling mortar and quartz systems. Perdure E10 all-purpose epoxy resin is characterized as an excellent general-purpose material with good clarity and color retention. Perdure E10 is essentially odorless and therefore can be applied in occupied areas.

Perdure E02 is a 100% solids, moisture tolerant epoxy primer for concrete and masonry surfaces. Perdure E02 combines the properties of water insensitivity with good wetting properties. Perdure E02 provides excellent filling and sealing properties needed under high-performance epoxy wall coatings on concrete and cinder block walls.

Perdure U45 is a two-component water-based aliphatic (non-yellowing) polyurethane topcoat for concrete and wood surfaces. Perdure U45 is free from the health and environmental problems normally found in solvent-based polyurethanes while maintaining excellent performance properties. Perdure U45 is a high-performance coating for use in a variety of seamless floor and wall coating systems. Perdure U45 provides a matte finish suitable in areas like clean rooms, hospitals, pharmaceutical facilities, stained concrete and wood floors.

Paramol is designed to be both a sealer and bonding agent for interior applications of the Param 5500. Paramol is a concentrated re-emulsifiable adhesive specifically designed to enhance the bond of the Param 5500 providing maximum adhesion and seal between the substrate and the self-leveling concrete.

Hermetix Protector is a colloidal silica-based concrete protector/sealer. Hermetix Protector enhances the densified concrete surfaces. Hermetix Protector also improves the surface hardness through colloidal silica reaction during application. Hermetix Protector reduces liquid penetration, enhances color, increases gloss reading and improves slip resistance of polished concrete surfaces.

Perdure A01 is a clear acrylic solution formulated to create a clear, non-yellowing protective coating. Perdure A01 provides a tough, UV and abrasion resistant film that protects surfaces from moisture penetration, staining, dirt, dust and wear. Providing a surface that is easy to clean and maintain Perdure A01 is an excellent choice for both interior and exterior applications.

Perdure FE80 is an ultra-high solid, flexible urethane-modified epoxy used as a crack isolation membrane for interior use under various Duraamen Resinous Flooring Systems. It resists cracking caused by horizontal substrate movement, providing a crack-resistant, resilient, sound-absorbent, waterproof, durable floor.

Perdure E32 is a water-based epoxy primer/sealer formulated to have maximum penetration into concrete surfaces to provide high bond strength and adhesion. Perdure E32 is specially formulated to reduce concrete outgassing. Perdure E32 has a very low odor and can be used in occupied areas. Perdure E32 is ideal for both new and old concrete surfaces. Perdure E32 is used as a primer for Perdure high build and thin-film coatings systems.

Perdure P72 is a new generation fast-curing, two-component, poly aspartic aliphatic polyurea formulated to be used as a sealer or topcoat for interior or exterior use over properly prepared concrete or resinous flooring systems. Perdure P72 has excellent penetration and bond strength to properly prepared surfaces, UV resistant, abrasion, impact and wear-resistant.

Perdure AU52 is a two-part, clear acrylic polyurethane coating with excellent gloss retention. Perdure AU52 is used as a sealer/coating over a variety of substrates. Perdure AU52 cures to a very tough, abrasion-resistant film with exceptional exterior durability, chalk resistance, color stability, and long-term gloss retention. Perdure AU52 has been designed for use over concrete, acid-stained surfaces, exposed aggregate, brick pavers and various types of decorative concrete.

Hermetix Densifier is a colloidal silica-based densifier for concrete polishing systems that transform ordinary concrete surfaces into exceptionally durable, attractive, colorful floors. The concrete surfaces benefit from the Hermetix Densifier, displaying an attractive floor finish with exceptional durability. Hermetix Densifier is recommended for concrete floors where beauty, durability and use of environmentally friendly materials are important. Concrete surfaces treated with Hermetix Densifier achieve stunning visual and functional rejuvenation transforming them into colorful and expressive wear surfaces.