Products

FluoSolv® FR110 is a proprietary solvent blend that is non-flammable, non-toxic and will meet the zero-VOC emission requirements such as those mandated by the US EPA and California SCAQMD. FluoSolv® FR-110 is formulated as an azeotrope which means that it will not change its composition and hence performance when used in vapor degreasing equipment. It does not contain any ozone depleting chemicals thus making it an ideal replacement for AK-225. FluoSolvTM FR-110 is a fast-evaporating solvent that can also be used as a spray & wipe solvent or as an ultrasonic dip solvent for spot-free parts. It is a much safer solvent than NPB or TCE due to its high allowable exposure limit.

Ecolink Green Lightning BC-45 – 45% VOC Compliant Brake Cleaner is a super active solvent blend that provides maximum performance in a brake parts cleaner without the use of chlorinated solvents. High powered blasting spray easily removes brake fluid, grease, oily dirt and contaminants from linings, pads and drums, cylinders and springs without disassembling the brake unit. This special formula is also suitable for cleaning equipment, tools plus parts and meets or exceeds current state VOC requirements.

Ecolink POSITRON (A) embodies a series of important improvements over hydrocarbon/terpene blends previously used to replace 1, 1, 1 trichloroethane and CFC-113. POSITRON dries more rapidly and completely than any other terpenebased solvent available today. Thanks to the use of a patented distillation methodology, this material has very low odor. POSITRON contains no oxidizers, and will not cause moisture condensation problems since it does not evaporate too rapidly. Unlike other electrical solvents, POSITRON is non-toxic.

NuGenTec FluoSolv® WS is a non-flammable wipe solvent especially developed to remove PFPE (perfluoropolyether) oils and greases such as Krytox, Fomblin, Nye, Barrierta and Christolube as well as hydrocarbon based greases. FluoSolv™ WS is a proprietary blend of solvents that is effective in cleaning fluorinated lubricants and preservatives from bearings, parts and housings. FluoSolv™ WS is ideal for use as a spray and wipe solvent in applications that require room-temperature hand or mechanical cleaning.

Ecolink Boiler & Cooler Waterguard is a dark purple, alkaline solution that contains sodium hydroxide (5%-6% by concentration) and sodium nitrite (10%-12% by concentration). It aids in the protection of closed loop water treatment systems and hot water boilers. Additionally, it contains corrosion inhibitors that prevent corrosion, rust, and scale buildup in these systems.

Ecolink Boiler Wash is a clear, alkaline solution that contains 2-butoxyethanol, disodium trioxosilicate (both 0%-4% by concentration), and potassium hydroxide (3%-8% by concentration). It eliminates scale, corrosion, oil, grease, and rust from new boilers, closed loops, heat exchange tubes, surfaces, and towers. It can also be used on boilers that have been taken offline.

Ecolink Sodium Hypochlorite is an industrial bleach sanitizer & disinfectant. With a strength two and one half times as strong as bleach our sodium hypochlorite is ideal as a disinfectant, biocide, and destainer.

Ecolink Biofilm Busteris a light yellow, alkaline solution that primarily consists of potassium dimethyldithiocarbamate (10%-25% by concentration). It removes biofilms and other debris from recirculating water systems such as cooling towers and air wash systems. Biofilm Buster works best in systems with a pH between 6 and 8.8, but it can be used in more alkaline solutions as well.

Electron® (A) is an exceptional solvent degreaser formulated without chlorinated solvents or other hazardous ingredients. The base for ELECTRON is a unique highgrade oil distillate, which provides its dielectric strength, allowing it to be used safely on all types of electrical apparatus. With its high flash point, ELECTRON provides an unprecedented degree of user safety. ELECTRON Environmentally Preferred Dielectric Solvent is strong enough to remove grease, fuel oil, carbon and organic resins yet safe on most plastic and rubber surfaces. Unlike other solvents, ELECTRON can be used without extensive protective equipment. Common sense chemical precautions are required.

Ecolink Ethylene Glycol is a clear liquid that consists of the chemical 1,2-ethanediol at a concentration of 80%-100%. It is an effective antifreeze in chilling systems as well as automobile engines. It is also used in the manufacturing of polymers, inks, pharmaceuticals, and other products.