Knowde Enhanced TDS
Features & Benefits
- Benefits
- Low reactivity
- Formulated with environmentally friendly ingredients
- Available in bulk sizes (55-gallon drums)
Applications & Uses
- Applications
- Biofilm Buster is a water treatment solution for recirculating water systems, including cooling towers and air wash systems.
- Systems must be cleansed of algae, microbial slime, and other accumulations with an EPA-registered cleaner, then drained and refilled with clean water, before using Biofilm Buster.
- Initially, Biofilm Buster should be used at a concentration of 30-60 ppm, or 3-6 fluid ounces per 1,000 gallons of water.
- After the initial dose, it should be used at a rate of 1-6 fluid ounces per 1,000 gallons.
- The maintenance dose’s frequency will vary depending on the amount of bleed-off and the system’s condition, but generally, it should be administered every 1-5 days.
- Administering Biofilm Buster by slug feed in one large dose is preferable to dispensing in smaller, intermittent doses.
Packaging & Availability
- Packaging
- Weight : 575 lbs
- Dimensions : 24 × 24 × 36 in
- Lead Time : 10 days – MTO