Knowde Enhanced TDS
Identification & Functionality
- Cleaning Ingredients Functions
- Technologies
- Product Families
Features & Benefits
- Benefits
- Low reactivity
- Removes numerous types of dirt and grime
- Sold in a bulk 55-gallon drum for industrial use
Applications & Uses
- Markets
- Applications
- Home Care Applications
- I&I Cleaning Applications
- Applications
- Boiler Wash is a water treatment solution that can be applied to new boilers, offline boilers, closed loops, heat exchange tubes, surfaces, and towers to expel oil, grease, scale, corrosion, and rust.
- For fire-tube boilers, the boiler must be filled with water with the top manhole or hand-hole open. Then, Boiler Wash may be added at a rate of 1-2 gallons per 100 gallons of water.
- The boiler should be turned on, allowed to heat up, then turned off once the water is boiling.
- It can be switched back on for about 1 minute every 15 minutes for an hour, ensuring that the water does not overflow. Then, the boiler may be drained and rinsed out.
- For towers, Boiler Wash should be used at a rate of 1 gallon per 1,000 gallons of water.
- It must be added while the bleed valve is closed and the circulation pump is on, then permitted to circulate.
- After 1-2 hours, the lowest bleed valves may be released to allow the dirty solution to drain out.
- Boiler Wash can be left to circulate and bleed for a few hours.
- Finally, the bleed rate can be returned to its regular rate, and normal tower treatment can be administered at 4x its regular dosage.
Properties
- Physical Form
Packaging & Availability
- Packaging Type
- Packaging
- Weight : 484 lbs
- Dimensions : 24 × 24 × 36 in
- Lead Time : 10 days MTO