Knowde Enhanced TDS
Identification & Functionality
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Product Background
The 3D4MAKERS ASA Filament contains unique properties because the material has an extremely constant diameter and roundness. On top of that the ASA filament does not come into contact with water during the production process and is directly packaged in a vacuum packaging. These properties make the 3D4MAKERS ASA Filament particularly suitable for FDM and FFF 3D printers. The material has an excellent adhesion between layers which results in great improvement of the impact resistance, strength, durability and the printing process.
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Physical Form
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Flammability
Value | Units | Test Method / Conditions | |
Density | 1.05 | g/cm³ | — |
Melt Volume-Flow Rate (MVR) | 12 | g/10 min | — |
Molding Shrinkage-Flow (3.20 mm) | 0.40 - 0.70 | — | — |
Rockwell Hardness | 103 | (R-Scale) | — |
Value | Units | Test Method / Conditions | |
Flexural Modulus (3.20mm) | 2210 | MPa | — |
Flexural Strength (3.20mm) | 75.5 | MPa | — |
Notched Impact Strength | 180 | L/m | — |
Tensile Elongation (Break, 3.20 mm) | 25 | % | — |
Tensile Elongation (Yield, 3.20 mm) | min. 6.0 | % | — |
Tensile Modulus (3.20 mm) | 2080 | MPa | — |
Tensile Strength (Yield, 3.20 mm) | 47.1 | MPa | — |
Value | Units | Test Method / Conditions | |
Heat Deflection Temperature (0.45 Mpa, Unannealed, 6.40 mm) | 96 | °C | — |
Heat Deflection Temperature (1.8 Mpa, Unannealed, 6.40 mm) | 86 | °C | — |
Vicat Softening Temperature | 95 | °C | — |
Value | Units | Test Method / Conditions | |
Flame Rating (1.6 mm) | HB | — | — |
Flame Rating (3.1mm) | HB | — | — |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Print Recommendation
Nozzle Temperature 240 - 280 ºC Bed Temperature 90 - 110 ºC Print Speed 35 - 70 mm/s Bed Adhesion PEI Sheet, Buildtak, Adhesion Spray
To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations. Keep the 3D printer out of the sun. This cannot be a room where people sleep. When the 3D printer is not being used it is important to keep the 3D4MAKERS ASA Filament in a bag and stored in a cool, dry and dark place until it is used again.
Packaging & Availability
- Packaging Type