Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Physical Form
- Physical Properties
- Mechanical Properties
- Thermal Properties
Value | Units | Test Method / Conditions | |
Density | 1.4 | g/cm³ | ISO 1183-1 |
Shore D Hardness | 72 | — | ISO 868 |
Value | Units | Test Method / Conditions | |
Elongation at Yield (Tensile Sample Thickness 1.5 mm) | 4 | % | ISO 527-1 |
Flexural Modulus | 3650 | MPa | ISO 178 |
Flexural Strength | 65 | MPa | ISO 178 |
Izod Impact Strength (Notched) | 7 | kJ/m² | ISO 180-1 |
Tensile Modulus (Tensile Sample Thickness 1.5 mm) | 3000 | MPa | ISO 527-1 |
Tensile Strength (Tensile Sample Thickness 1.5 mm) | 45 | MPa | ISO 527-1 |
Value | Units | Test Method / Conditions | |
Heat Deflection Temperature (120 K/H) | 55 | °C | ISO 75 B |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Print Recommendation
Nozzle Temperature 180 - 210 °C Bed Temperature 25 - 50 °C Print Speed 40 - 70 mm/s Bed Adhesion PEI Sheet / Glass
Storage & Handling
- Additional info
For many 3D printers, C8 will print best at approximately 200°C with a bed temperature of 50°C and a speed of 50 mm/s. In designs with significant overhangs and bridges, best results are obtained with fans at 80%. If your model has no overhangs then putting your fans at 0% improves interlayer bonding and in so doing the final mechanical strength of your part. To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any dra and/or temperature fluctuations. Keep the 3D printer out of direct sunlight. When the 3D printer is not being used it is important to keep the 3D4Makers Facilan™ C8 filament in a bag and stored in a cool, dry and dark place until it is used again.