Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Main Features
Strong, stiff parts. Electrically conductive, suitable for continuous discharging of statically-generated electricity. High continuoususe and heat-distortion temperatures. Non flammable.
- Additional Information
Filaments produced from this material may be wound into standard size spools.
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Physical Form
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Electrical Properties
Value | Units | Test Method / Conditions | |
Charpy Impact Strength (23°C/50%Rh) | 22 | kJ/m² | ISO 179 1eU |
Elongation Maximum Force (23°C/50%Rh) | 1.6 | % | ISO 527 |
Flexural Elongation (Max. Force23°C/50%Rh) | 2 | % | ISO 178 |
Flexural Modulus (23°C/50%Rh) | 9 | GPa | ISO 178 |
Flexural Strength (23ºC/50%Rh) | 170 | MPa | ISO 178 |
Modulus of Elasticityc (23°C/50%Rh) | 11 | GPa | ISO 527 |
Tensile Strength (23°C/50%Rh) | 120 | MPa | ISO 527 |
Value | Units | Test Method / Conditions | |
Linear Mould Shrinkage (23°C/50%Rh) | 0.1-0.3 | % | DIN 16742 |
Service Temperatureduring Life (Time Max. 200H) | 240 | °C | — |
Specific Gravity | 1.51 | g/cm³ | ISO 1183-3 |
Water Absorption (23°C/24H) | min. 0.05 | % | ISO 62 |
Value | Units | Test Method / Conditions | |
Continuous Service Temperature20.000 H | 220 | °C | IEC 60216 |
Value | Units | Test Method / Conditions | |
Surface Resistance (Rob) | min. 10⁶ | Ω | DIN IEC 60093 |
Insulation Resistance Strip Electrode (R25) | max. 0⁶ | Ω | DIN IEC 60167 |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
Technical Details & Test Data
- Print Recommendation
Printer nozzle temperature 310 - 340°C Heated bed temperature 80 - 100°C Print Speed 20 - 50 mm/s Bed Adhesion Magigoo HT on glass or a PEI Sheet
Pre drying recommendations 120°C, 4 - 6 hours
Extra We advise to use a adapted nozzle (>0.5mm) for carbon filled filaments
Packaging & Availability
- Packaging Type
Storage & Handling
- Delivery form & storage
Unless indicated otherwise, the material is delivered as 3mm long pellets in sealed bags on pallets. Preferably storage should be effected in dry and normally temperatured rooms.