Browse Products by Market

Browse Products by Technology

Products

Brands

Formulations

Documents

Experts

Established in 1990, Epoxytec manufactures specialty protective coatings and repair compounds with a specific focus on providing interior lining solutions for water and wastewater environments. Headquartered in Hollywood, Florida, Epoxytec collaborates with asset owners, engineers, and certified contractors to provide rehabilitative lining solutions worldwide. Commonly applied at a thickness of over 125 mils, Epoxytec’s structural grade epoxy is designed to deliver an ultra-high build, high strength lining that incorporates micronized reinforcement to seal against inflow and infiltration (I&I) and provide corrosion protection. In 2021, Epoxytec joined the Tnemec family of coatings, and continues to evolve and supply the coating industry with quality products offering unique advantages for challenging wastewater conditions. 

Privacy

Terms & Conditions

Terms of Sale

Cookie Policy

Uroflex is a unique, two-component, 100% solid urethane-modified-epoxy (UME) and cycloaliphatic cured coating and lining system. Uroflex is a high-build, self-leveling coating system incorporating a high degree of flexural modulus. Adheres impressively well to concrete and steel. Uroflex is applicator friendly and easy to apply; conveniently produced in a one-to-one mix ratio by volume. Uroflex is “green” formulated, environmentally friendly, 100% solid (no VOCs, no solvent).

Uroflex

A1 Primecoat is a surface tolerant, two-component, multi-purpose primer (barrier coat). Formulated for high film build and long-term protection from salt/fresh water, as well as a wide variety of chemical exposures. Exceptional corrosion protection with advanced rust inhibitors. Excellent adhesion to tight rust. Fine adhesion to damp surfaces. Ideal for maintenance painting and fabrication shop applications. The high solids content ensures adequate protection of sharp edges, corners, and welds.

A1 Primecoat

B1 Primecoat is designed as a high-performance sealer and coating formulated for concrete. B1 Primecoat™ is supplied in a convenient one-to-one mix ratio. B1 Primecoat™ is capable of penetrating and filling the porous structure of concrete in order to provide an effective subsurface barrier to prevent moisture migration, out-gassing, and chemical penetration. Epoxytec B1 Primecoat™ exhibits highly penetrating properties which provide porous filling and strengthening of the top concrete layer to form a sufficiently strong base for subsequent top coats.

B1 Primecoat

Mortartec Silicate™ is an industrial-grade blend of Portland cement, graded silica sand, fibers and silica fume. The mortar may be hand or spray applied, typically from ½” to 2” in depth. Uses include repairing concrete walls, ceilings, lining brick or concrete infrastructure, etc. Mortartec Silicate provides an extremely dense matrix and will accept coatings at earlier ages than typical Portland cement repair products.

Mortartec Silicate

CPP™ is a two-component moisture insensitive, 100% solids, high strength and reinforced structural-grade epoxy. CPP is truly versatile and can be used as an adhesive, patching filler, and as a high-build, stand-alone protective liner. The material can be applied as thin as a skim-coat and up to 1/2" per pass (vertical/overhead). Blended with reinforcing agents and various fibers, the Epoxytec CPP when cured acts as a fiber-reinforced- polymer (FRP) with high strength mechanical properties. Contains no solvents (no VOCs). CPP bonds to concrete, steel, wood, brick, some plastics and most construction materials.

Mortartec Cermaico is a next-generation, epoxy-modified mortar. A highly advanced, formulated epoxy blend incorporating cutting-edge waterborne epoxide technology with proprietary engineered curing; combined with a specific balance of Portland cement, hardened ceramics, graded silica aggregate, synthetic fibers and silica fume to produce one of the most coveted mortars in the industrial market today. This results in a smooth mortar application with one of the hardest mortar surfaces in the industry once cured. The Mortartec Ceramico is industrial-grade and exhibits excellent performance properties unlike any mortar technology before it, with incredible adhesive properties, enhanced barrier sealing capabilities assisting with minimizing out-gassing and moisture vapor transmission (MVT).

Mortartec Cermaico

Uroseal™ 45V polyurethane joint sealant is a two-components, aliphatic, chemically curing, 100% solid urethane sealant formulated as a high build coating / joint sealing system for vertical and overhead use. Once cured, the material forms a high-quality elastomeric sealant. Uroseal™ 45V is ideally suited for indoors or outdoors with use on concrete, wood, and most construction materials. Uroseal™ 45V produces a flexible, long‐lasting sealant with extraordinary adhesion, cohesion, and elasticity that resists deterioration caused by weathering, stress, movement, water, oils, and many chemicals. Provides corrosion protection and chemical resistance; and because of its mixed gel‐state, it is specially designed for use on vertical and overhead applications.


Uroseal

45 Primecoat is a single-component epoxy primer formulated to provide a base coat prior to coating concrete, steel and other substrates. Provides an excellent cross-link with added adhesion. Formulated to assist in the adhesion of coating applications, adhesives, and other epoxies; particularly improves the adhesion of urethane materials as well. Being in the epoxide family, as a penetrating and thin-mil surface sealant, it also performs as base protection for chemical resistance and extended water immersion.

45 Primecoat

CPP™ Gel: Crack Injection is two-component moisture insensitive, highly adhesive, chemical resistant, 100% solids, high strength epoxy paste and reinforced structural-grade epoxy. Similar to “standard” CPP once cured, this version is packaged more conveniently for Crack Injection and repair by extrusion. Contains no solvents. CPP™ Gel: Crack Injection bonds to concrete, steel, wood, brick, some plastics and most construction materials. Application temperature range is between 40°F and 100°F.

CPP™ Gel: Crack Injection

B1 Primecoat™ is designed as a high-performance sealer and coating formulated for concrete. B1 Primecoat™ is supplied in a convenient one-to-one mix ratio. B1 Primecoat™ is capable of penetrating and filling the porous structure of concrete in order to provide an effective subsurface barrier to prevent moisture migration, out-gassing, and chemical penetration. Epoxytec B1 Primecoat™ exhibits highly penetrating properties which provide porous filling and strengthening of the top concrete layer to form a sufficiently strong base for subsequent top coats.

B1 Primecoat™

Mortartec Cermaico™ is a next-generation, epoxy-modified mortar. A highly advanced, formulated epoxy blend incorporating cutting-edge waterborne epoxide technology with proprietary engineered curing; combined with a specific balance of Portland cement, hardened ceramics, graded silica aggregate, synthetic fibers and silica fume to produce one of the most coveted mortars in the industrial market today. This results in a smooth mortar application with one of the hardest mortar surfaces in the industry once cured. The Mortartec Ceramico is industrial-grade and exhibits excellent performance properties unlike any mortar technology before it, with incredible adhesive properties, enhanced barrier sealing capabilities assisting with minimizing out-gassing and moisture vapor transmission (MVT).

Mortartec Cermaico™

Uroflex™ is a unique, two-component, 100% solid urethane-modified-epoxy (UME) and cycloaliphatic cured coating and lining system. Uroflex is a high-build, self-leveling coating system incorporating a high degree of flexural modulus. Adheres impressively well to concrete and steel. Uroflex is applicator friendly and easy to apply; conveniently produced in a one-to-one mix ratio by volume. Uroflex is “green” formulated, environmentally friendly, 100% solid (no VOCs, no solvent).

Uroflex™

Mortartec Silicate™ DS is an industrial-grade repair mortar designed for dry shotcrete only applications to repair deteriorated concrete, where an early cure, high-density overlay is required. The material is a blend of Portland cement, graded silica sand, fibers and silica fume- incorporating corrosion and rust inhibitors. The mortar is spray applied, typically from ½” to 4” in depth (overhead and vertically) with incredible adhesion. Uses include repairing concrete walls, ceilings, brick, etc. Mortartec Silicate DS provides an extremely dense matrix and will accept coatings at earlier ages than typical Portland cement repair products.

Mortartec Silicate™ DS

A1 Primecoat™ is a surface tolerant, two-component, multi-purpose primer (barrier coat). Formulated for high film build and long-term protection from salt/fresh water, as well as a wide variety of chemical exposures. Exceptional corrosion protection with advanced rust inhibitors. Excellent adhesion to tight rust. Fine adhesion to damp surfaces. Ideal for maintenance painting and fabrication shop applications. The high solids content ensures adequate protection of sharp edges, corners, and welds.

A1 Primecoat™

CPP™ Sprayliner™ is two-component moisture insensitive, highly adhesive, chemical resistant, 100% solids, high strength and reinforced epoxy. Equal to “standard” CPP once cured, this version is packaged more conveniently for spray applicators seeking to utilize plural-component heated spray application. The material can be sprayed ultra-high build, between 1/16” - 1/4” (62.5 - 250 miles) per pass. Blended with reinforcing agents and various fibers, the Epoxytec CPP™ Sprayliner™ when cured creates reinforcement lining as a fiber-reinforced-polymer (FRP), with high strength and flexural properties for partially or fully deteriorated structures.

CPP™ Sprayliner™

Uroseal™ 45V polyurethane joint sealant is a two-components, aliphatic, chemically curing, 100% solid urethane sealant formulated as a high build coating / joint sealing system for vertical and overhead use. Once cured, the material forms a high-quality elastomeric sealant. Uroseal™ 45V is ideally suited for indoors or outdoors with use on concrete, wood, and most construction materials. Uroseal™ 45V produces a flexible, long‐lasting sealant with extraordinary adhesion, cohesion, and elasticity that resists deterioration caused by weathering, stress, movement, water, oils, and many chemicals. Provides corrosion protection and chemical resistance; and because of its mixed gel‐state, it is specially designed for use on vertical and overhead applications.

Uroseal™ 45V

Mortartec Silicate™

Epoxytec

Established in 1990, Epoxytec manufactures specialty protective coatings and repair compounds with a specific focus on providing interior lining solutions for water and wastewater environments. Headqu

Epoxytec - Protective coatings - Repair compounds - Knowde

Website

Uroflex™ - Why Use Uroflex™

Uroflex™ - Why Use Uroflex™ - Epoxytec - Knowde

Job Title

Shipping Terms

Name

and the data associated with it — permanently.

This is a Premium Feature

Changes to filters have not been applied.

Discard changes?

{userCompanyName} notice

In order to join {userCompanyName} on Knowde, you must use your business email address.

Business already on Knowde

{userCompanyName} requires all users on {companyName} to register with their business email address to ensure confidentiality and security.

{userCompanyName} requires registering your business email address

There's only a little ways to go.

Creating an account is free and the only way to directly download documents, order samples, request quotes and use direct messaging.

Quit Sign Up?

Tell us about {userCompanyName}

from concierge@knowde.com

Click the link in the email, or enter the 6-digit code

Verification email sent

Since you’re using a personal email address, we require proof to verify the information you have provided.

Please verify your account

Please go back and enter in an email address that is directly associated with a business.

Knowde is built for businesses

Also, using a personal email for creating your {companyName} account may require additional verification of your company details.

We recommend signing up with a work email address to get faster responses, especially when requesting samples, documents, and more.

Please enter your business email address below.  We’ll send you a confirmation code to quickly verify.

Enter your business email

{companyName} uses Knowde for account management so you can manage all of your sample requests, RFQs, orders and more in one place.

Knowde is for businesses, you may have a hard time receiving responses to your requests if you use a personal email address.

to {email}

We sent an email to {email}

Please click the link to reset your password

Check your email

Create a new password

Password expired

Sign in to {companyName}

Enter a new secure password

Change your password

Enter the email address associated with your account

Reset your password

Enter your password for

Use your Knowde password to sign in:

Please provide additional information to help us verify your company.

Terms and Conditions

Compare multiple products at once and find the best fit for your project needs.

Why is this important?

Enter your password

Unlock your account

Knowde is the world’s biggest marketplace to search for ingredients, polymers, and chemistry. You can:

Welcome to Knowde

View All Products

Cart

Please fix the following before proceeding to payment

An order receipt has been emailed to {email}

Order

This feature is currently unavailable at this screen size.

Payment

Shipping

Checkout

KEEP IN MIND

You will lose any existing chat history by starting a new chat.

Start a new chat?

Compare Products

This document is restricted content.

If you believe you should have permission to this document, please request access.

Restricted Access

It only takes 60 seconds to create an account.

Available {documentType} documents for this product ({counter})

Describe Documents You’d Like to Request

Invalid job title

That’s not the reaction we were expecting.

Page not found - Store for chemicals, polymers and ingredients

Internal Server Error - Store for chemicals, polymers and ingredients

Unexpected error occurred. Please contact us.

Client Side Exception - Store for chemicals, polymers and ingredients

Show products with

Filters

Featured Products

Flavor & Taste Explorer

Flavor Families

Enter your inquiry here, include as much detail as you’re able. *

To submit an inquiry to {companyName}, please fill out the form below and click Submit. They will get back to you as soon as they’re able.

Home Page

Request samples, documents, and quotes directly from suppliers

{companyName} experts - Knowde

Knowde is the first marketplace for chemicals, polymers and ingredients. Our leading-edge digital capabilities connect thousands of suppliers and customers every day.

Chemicals Marketplace - ingredients & raw materials - Knowde

Learn how to take full advantage of the free to use tools that you have unlocked.

Explore the capabilities of the platform and get immediate assistance for your needs with one of our experts.

Schedule a Demo

You’ll meet with Kiana from our Knowde Marketplace Team

Explore the capabilities of the platform and get immediate assistance for your needs.

Learn how you can make the most of the free tools now available to you.

Explore the capabilities of the platform with our dedicated team.

Weekly Webinar

See which others might better fit your needs.

This is just one of {allProducts} products on Knowde.

BROWSE BY

Knowde for Suppliers

Most popular categories

Gain instant access to our marketplace of over 250,000 chemicals, ingredients and polymers from 8,000 suppliers. Browse, search, and filter to quickly compare products, find information, request documents, order samples, and get quotes directly from suppliers.

Search and filter over 250,000 chemicals, ingredients and polymers, access documents and download starter formulations. Interact with over 8,000 suppliers whose representatives are ready to help. Sign up for a free Knowde Marketplace account today.

Create a free account to gain instant access to our marketplace of over 250,000 products and their documents.

Get new products to market faster with a free Knowde Marketplace account

The fastest way to find the right raw materials for your products

Want to explore more products?

Popular {companyName} Products

Start Order

Get a Quote

{price} each for {name}

1 of {brandProductsCount} products in this brand

This will be used for any follow-up questions so we can best meet your needs

Please fill out the form below to help {companyName} prepare your quote

Your request has been sent to {companyName}

This information will help us get you the right materials.

All Categories

{numberOfResults, plural, one {Brand} other {Brands}}

{numberOfResults, plural, one {Product} other {Products}}

Search Tips

{charactersCounter}/{limitCharacters} Characters

Visit

Your account has been verified. You now have access to the full power of {companyName}

The quantity your business will require annually, if the sample product suits your project's needs.

Uroflex™ - Why Use Uroflex™

Technical Data Sheet