Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Materials Features
Applications & Uses
- Applications
- Composites End Use
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Physical Properties
- Mechanical Properties
- Thermal Properties
- Electrical Properties
- Flammability
- Recommended Printing Conditions
| Value | Units | Test Method / Conditions | |
| Density (23°C) | 1.14 | g/cm3 | ASTM D792 |
| Water Adsorption (24h - 23°C) | 1.3 | % | ASTM D570 |
| Linear Mould Shrinkage | 1.4 - 2.1 | % | — |
| Value | Units | Test Method / Conditions | |
| Tensile Strength at Yield (50 mm/min.) | 90 - 60 | MPa | ASTM D638 |
| Tensile Strenght at Break (50 mm/min.) | 85 - 50 | MPa | ASTM D638 |
| Elongation At Break (50 mm/min.) | 10 - 80 | % | ASTM D638 |
| Flexural Modulus (1.3 mm/min.) | 3100 - 1200 | MPa | ASTM D790 |
| Impact Strength (Notched (23°C - 3.2 mm) | 60 - 120 | J/m | ASTM D256 |
| Impact Strength (Notched (20°C - 3.2 mm) | 40 - 70 | J/m | ASTM D256 |
| Rockwell Hardness | 115 - 95 | Scala R | ASTM D785 |
| Value | Units | Test Method / Conditions | |
| Heat Distortion Temperature (1.82 MPa) | 75.0 | °C | ASTM D648 |
| Vicat Softening Point (49N x 120°C/h) | min. 235 | °C | ASTM D1525 |
| Melting Point | min. 255 | °C | ASTM D2117 |
| Value | Units | Test Method / Conditions | |
| Dielectric Costant (1MHz - secco) | 3.5 - 4.0 | — | IEC 60250 |
| Dielectric Strenght (S=1mm) | 30 - 35 | KV/mm | IEC 60243-1 |
| Volume Resistivity (Secco) | 10^15 - 10^12 | Ohm-cm | IEC 60093 |
| Value | Units | Test Method / Conditions | |
| Glow Wire Test (S=2 mm) | 750.0 | °C | IEC 695-2-1 |
| Flammability (S=1.6 mm) | V2 | Classe | UL 94 |
| Flammability (S=3.2 mm) | V2 | Classe | UL 94 |
| Value | Units | Test Method / Conditions | |
| Cylinder Temperature | 250 - 270 | °C | — |
| Mold Temperature | 60 - 90 | °C | — |
| Dry Temperature (2-4 h) | 80 - 100 | °C | — |
| Injection Speed | Medio-alta | — | — |
Regulatory & Compliance
- Certifications & Compliance