Products

Dimethylamino ethyl methacrylate, also known as MADAME or DMAEMA, serves as a reducing agent or electron donor when paired with type II photoinitiators. It is water-soluble, monofunctional and can improve adhesion of formulations.

PL-2263 is a versatile adhesion promoter for Energy Cured Coatings, Inks and Adhesives. It can enhance adhesion to a large range of challenging substrates. It is especially effective on many metals, glass and selected plastics.

To simplify your formulation processes, we provide bis GMA already diluted in a 80:20 ratio with TEGDMA. Bis-GMA and triethylene glycol dimethacrylate are commonly paired in dental formulations. All of our bisGMA products carry the lowest levels of BPA or bisphenol A on the market.

PL-450 is a liquid photoinitiator compound developed specifically for white and pastel pigmented systems as well as thicker clear films. It provides a perfect balance between surface cure and through cure to enable the best possible adhesion in these systems. Because it's a liquid, it works well as a press side additive for the printer.

PL-3230 Tricyclodecane dimethanol diacrylate is a difunctional monomer that provides low shrinkage and excellent hardness.

PL-3124 2-Phenoxy Ethyl Methacrylate is a monofunctional monomer providing low odor and good adhesion properties.

PL-2152 is a methacrylate based adhesion promoter. It is a versatile adhesion promoter for energy cured coatings, inks, and adhesives. The low viscosity of this product makes it an ideal reactive diluent that can be added to formulations to enhance adhesion to a range of challenging substrates.

PL-2122 is a versatile adhesion promoter for Energy Cured Coatings, Inks and Adhesives. It can enhance adhesion to a large range of challenging substrates. It is especially effective on many metals, glass and selected plastics.

PL-630 is a low viscosity liquid photointitiator blend developed specifically for pigmented UV and LED curable coatings and gels.

PL-605 is a liquid photoinitiator compound developed specifically for thick clear UV and LED curable coatings and gels.

PL-TZT is a fast curing type-II photoinitiator. In the presence of O2, the use of an amine co-initiator is recommended. It is soluble in most monomers, oligomers and pre-polymers. It is insoluble in H2O.

PL-3110 is a monofunctional monomer providing good adhesion and low viscosity.

PL-3217 is a difunctional monomer providing fast cure and low viscosity.

PL-3122 Propoxylated Tetrahydrofurfuryl Acrylate is a monofunctional monomer providing good adhesion to plastics and low viscosity.

PL-2349 is a Methacrylate containing adhesion promoter for Energy Cured Coatings, Inks and Adhesives. It can enhance adhesion to a large range of challenging substrates. It is especially effective on a wide variety of metals and many plastics.

PL-165E is a 65:35 blend of oligo [ 2-hydroxy-2-methyl-1-[ 4-(1-methylvinyl) phenyl] propanone] and TMP(EO)3TA. It is a fast curing type-I photoinitiator soluble in most monomers, oligomers and pre-polymers but insoluble in H2O.

Bisphenol A Glycidyl Methacrylate, or bis-GMA is a high viscosity resin that has been used in dental formulations for years. Our bis GMA is manufactured with low levels of BPA or bisphenol A and low color.

PL-2179 is a versatile adhesion promoter for Energy Cured Coatings, Inks and Adhesives. It can enhance adhesion to a large range of challenging substrates. It is especially effective on selected plastics.

PL-3301 Trimethylolpropane Triacrylate is a trifunctional monomer that provides harness and cure speed with low irritation.

PL-2345 is a Methacrylate containing adhesion promoter for Energy Cured Coatings, Inks and Adhesives. It can enhance adhesion to a large range of challenging substrates. It is especially effective on certain plastics.

PL-175D is a 75:25 blend of oligo [ 2-hydroxy-2-methyl-1-[ 4-(1-methylvinyl) phenyl] propanone] and DPGDA. It is a fast curing type-I photoinitiator soluble in most monomers, oligomers and pre-polymers but insoluble in H2O.

PL-6992 is a mixed aryl sulfonium salt cationic photoinitiator. It is very fast curing and easy to work with. It is soluble in most cycloaliphatic epoxies as well as vinyl ethers and other vinyl terminated monomers but insoluble in H2O.

PL-246 is a liquid photointitiator compound developed specifically for white and pastel pigmented systems as well as thicker clear films. It provides a perfect balance between surface cure and through cure to enable the best possible adhesion in these systems. Because it's a liquid, it works well as a press side additive for the printer.

PL-2155 is a versatile adhesion promoter for Energy Cured Coatings, Inks and Adhesives. It can enhance adhesion to a large range of challenging substrates. It is especially effective on many metals, glass and selected plastics.

PL-2121 is an effective adhesion promoter in a variety of applications. It demonstrates an especially strong affinity for adhesion to aluminum, cold rolled steel, stainless steel, and tin free steel when cured neat or in formulations. Low viscosity and high reactivity make PL-2121 an ideal choice for various energy cured coatings, inks, and adhesives.

PL-2317 is an acrylic acrylate based adhesion promoter for Energy Cured Coatings, Inks and Adhesives. It is especially effective on selected plastics.

PL-3122 Propoxylated Tetrahydrofurfuryl Acrylate is a monofunctional monomer providing good adhesion to plastics and low viscosity.

Bisphenol A Epoxy Methacrylate possesses a fast cure speed that forms a stiff polymer with above average hardness.

PL-2110 is a Phosphate containing adhesion promoter for Energy Cured Coatings, Inks and Adhesives. It can enhance adhesion to a large range of challenging substrates. It is especially effective on certain metals, glass and selected plastics.

PL-229W is a liquid photointitiator compound developed specifically for white and pastel pigmented systems as well as thicker clear films. It provides a perfect balance between surface cure and through cure to enable the best possible adhesion in these systems. Because it’s a liquid, it works well as a press side additive for the printer.

PL-2212 is a versatile adhesion promoter for Energy Cured Coatings, Inks and Adhesives. It can enhance adhesion to a large range of challenging substrates. It is especially effective on many metals, glass and PET.

CQ or camphorquinone is a visible light-activated initiator commonly used in urethane and acrylic systems.

BisGMA/Triethyleneglycol Dimethacrylate (70/30)

PL-2236 is a versatile adhesion promoter for Energy Cured Coatings, Inks and Adhesives. It can enhance adhesion to a large range of challenging substrates. It is especially effective on many metals, glass and selected plastics.

PL-6976 is a mixed aryl sulfonium salt cationic photoinitiator. It is very fast curing and provides lower yellowing than PL-6992. It is soluble in most cycloaliphatic epoxies as well as vinyl ethers and other vinyl terminated monomers but insoluble in H2O.