Products

Dimethylamino ethyl methacrylate, also known as MADAME or DMAEMA, serves as a reducing agent or electron donor when paired with type II photoinitiators. It is water-soluble, monofunctional and can improve adhesion of formulations.

PL-450 is a liquid photoinitiator compound developed specifically for white and pastel pigmented systems as well as thicker clear films. It provides a perfect balance between surface cure and through cure to enable the best possible adhesion in these systems. Because it's a liquid, it works well as a press side additive for the printer.

2-Methyl-1-[4-(methylthio) phenyl]-2-morpholino propan-1-one is a type I photoinitiator primarily used in pigmented systems. It is oftentimes used with PL-ITX as a sensitizer to enhance the curing efficiency in inks. It is soluble in most monomers, oligomers and pre-polymers but insoluble in H2O.

PL-4265 is a 50:50 liquid blend of 2-hydroxy-2-methyl-1-phenyl-1-propanone and diphenyl (2,4,6-trimethylbenzoyl) phosphine oxide. It provides exceptional cure response in white and pastel pigmented systems as well as thicker clear films. It provides a perfect balance between surface cure and through cure to enable the best possible adhesion in these systems. PL-4265 soluble in most monomers, oligomers and pre-polymers. It is insoluble in H2O.

2-hydroxy-2-methyl-1-phenyl-1-propanone is a fast curing type-I photoinitiator. It is soluble in most monomers, oligomers and pre-polymers but insoluble in H2O.

4-phenyl benzophenone is a very fast curing type-II photoinitiator. In the presence of O2, the use of an amine co-initiator is recommended. It is soluble in most monomers, oligomers and pre-polymers. It is insoluble in H2O.

Diphenyl (2,4,6-trimethylbenzoyl) phosphine oxide is a Type I photoinitiator best known for it's through cure abilities. It is soluble in most monomers, oligomers and pre-polymers but insoluble in H2O.

PL-605 is a liquid photoinitiator compound developed specifically for thick clear UV and LED curable coatings and gels.

PL-229W is a liquid photointitiator compound developed specifically for white and pastel pigmented systems as well as thicker clear films. It provides a perfect balance between surface cure and through cure to enable the best possible adhesion in these systems. Because it’s a liquid, it works well as a press side additive for the printer.

PL-OB is a highly efficient heat resistant, monomer soluble, chemically stable fluorescent whitener that provides brighter looking colors in a variety of system types.

PL-460 is a liquid photointitiator compound developed specifically for white and pastel pigmented systems as well as thicker clear films. It provides a perfect balance between surface cure and through cure to enable the best possible adhesion in these systems. Because it’s a liquid, it works well as a press side additive for the printer. PL-460 is soluble in most monomers, oligomers and pre-polymers. It is insoluble in H2O.

CQ or camphorquinone is a visible light-activated initiator commonly used in urethane and acrylic systems.

PL-LTE is a liquid photoinitiator compound developed specifically for lighter colored (non white) inks and coatings. It provides an optimum balance between surface cure and through cure to enable the best possible adhesion in these systems. Because of it’s optimum viscosity, it can be used in flexo, screen and paste inks without negatively effecting rheology. It is also well suited as a press side additive for the printer PL-LTE is soluble in most monomers, oligomers and pre-polymers. It is more

PL-175D is a 75:25 blend of oligo [ 2-hydroxy-2-methyl-1-[ 4-(1-methylvinyl) phenyl] propanone] and DPGDA. It is a fast curing type-I photoinitiator soluble in most monomers, oligomers and pre-polymers but insoluble in H2O.

PL-250 is an amino acrylate synergist which offers fast cure speeds and low residual odor. The low viscosity makes PL-250 easy to work with. This product works especially well with certain Type II photoinitiators to increase cure speed.

2-Ethylhexyl 4-dimethylamino benzoate is a tertiary amine synergist typically used in combination with type II photoinitiators such as Benzophenone. It is best known for its ability to promote surface cure. It is soluble in most monomers, oligomers and pre-polymers but insoluble in H2O.

1-hydroxy-cyclohexylphenyl-ketone is a fast curing type-I photoinitiator. It is soluble in most monomers, oligomers and pre-polymers but insoluble in H2O.

PL-CLR is a liquid photoinitiator compound developed specifically for thicker clear films where low yellowing is necessary. It provides a perfect balance between surface cure and through cure to enable the best possible adhesion in these systems. Because it’s a liquid, it works well as a press side additive for the printer. PL-CLR is soluble in most monomers, oligomers and pre-polymers. It is insoluble in H2O.

Benzophenone is a fast curing type-II photoinitiator. In the presence of O2, the use of an amine co-initiator is recommended. It is soluble in most monomers, oligomers and pre-polymers. It is insoluble in H2O.

PL-6976 is a mixed aryl sulfonium salt cationic photoinitiator. It is very fast curing and provides lower yellowing than PL-6992. It is soluble in most cycloaliphatic epoxies as well as vinyl ethers and other vinyl terminated monomers but insoluble in H2O.

PL-610 is a liquid photoinitiator compound developed specifically for thick clear UV and LED curable coatings and gels. PL-610 is soluble in most monomers, oligomers and pre-polymers. It is insoluble in H2O.

PL-DRK is a liquid photoinitiator compound developed specifically for dark and black inks and coatings. It provides an optimum balance between surface cure and through cure to enable the best possible adhesion in these systems. Because of it's optimum viscosity, it can be used in flexo, screen and paste inks without negatively effecting rheology. It is also well suited as a press side additive for the printer. PL-DRK is soluble in most monomers, oligomers and pre-polymers. It is insoluble in H2O.

PL-TINP is a highly efficient hydroxyphenol benzotriazole ultraviolet light absorber (UVA).

PL-165E is a 65:35 blend of oligo [ 2-hydroxy-2-methyl-1-[ 4-(1-methylvinyl) phenyl] propanone] and TMP(EO)3TA. It is a fast curing type-I photoinitiator soluble in most monomers, oligomers and pre-polymers but insoluble in H2O.

PL-150 is oligo [ 2-hydroxy-2-methyl-1-[ 4-(1-methylvinyl) phenyl] propanone] and 2-Hydroxy-2-methyl-1-phenyl-1-propanone. It is a very fast curing type-I photoinitiator soluble in most monomers, oligomers and pre-polymers but insoluble in H2O.

4-Methyl benzophenone is a fast curing type-II photoinitiator. In the presence of O2, the use of an amine co-initiator is recommended. It is soluble in most monomers, oligomers and pre-polymers. It is insoluble in H2O.

PL-630 is a low viscosity liquid photointitiator blend developed specifically for pigmented UV and LED curable coatings and gels.

PL-620 is a liquid photoinitiator compound developed specifically for thick clear UV and LED curable coatings. PL-620 is soluble in most monomers, oligomers and pre-polymers. It is insoluble in H2O.

PL-246 is a liquid photointitiator compound developed specifically for white and pastel pigmented systems as well as thicker clear films. It provides a perfect balance between surface cure and through cure to enable the best possible adhesion in these systems. Because it's a liquid, it works well as a press side additive for the printer.

PL-6992 is a mixed aryl sulfonium salt cationic photoinitiator. It is very fast curing and easy to work with. It is soluble in most cycloaliphatic epoxies as well as vinyl ethers and other vinyl terminated monomers but insoluble in H2O.

PL-TZT is a fast curing type-II photoinitiator. In the presence of O2, the use of an amine co-initiator is recommended. It is soluble in most monomers, oligomers and pre-polymers. It is insoluble in H2O.

PL-BLK is a liquid photoinitiator compound developed specifically for black inks and coatings. It provides an optimum balance between surface cure and through cure to enable the best possible adhesion in these systems. Because of its optimum viscosity, it can be used in flexo, screen and paste inks without negatively effecting rheology. It is also well suited as a press side additive for the printer PL-BLK is soluble in most monomers, oligomers and pre-polymers. It is insoluble in H2O.

PL-100 is a 70:30 blend of oligo [ 2-hydroxy-2-methyl-1-[ 4-(1-methylvinyl) phenyl] propanone] and 2-Hydroxy-2-methyl-1-phenyl-1-propanone. It is a fast curing type-I photoinitiator soluble in most monomers, oligomers and pre-polymers but insoluble in H2O.

Ethyl-4-dimethylamino benzoate is a tertiary amine synergist typically used in combination with type II photoinitiators such as Benzophenone. It is best known for it’s ability to promote surface cure. It is soluble in most monomers, oligomers and pre-polymers but insoluble in H2O.

PL-IND is a liquid photoinitiator compound developed specifically for dark and black inks and coatings where acid adhesion promoters are present.. It provides an optimum balance between surface cure and through cure to enable the best possible adhesion in these systems. Because of it’s optimum viscosity, it can be used in most coating and ink systems without negatively effecting rheology. It is also well suited as a press side additive for the printer PL-IND is soluble in most monomers, more

PL-600 is a liquid Photoinitiator compound developed specifically for white and pastel pigmented systems as well as thicker clear films. It provides a perfect balance between surface cure and through cure to enable the best possible adhesion in these systems. Because it's a liquid, it works well as a press side additive for the printer. PL-600 is soluble in most monomers, oligomers and pre-polymers. It is insoluble in H2O.