Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features/Benefits
- Exceptional adhesion to construction materials
- Easy to use 1:1 mix ratio
- Moisture insensitive
- Rapid strength gain in a wide temperature range
Applications & Uses
- Applications
- Application Area
- Primary Applications
- Bonding of concrete, masonry, steel, or wood.
- Anchoring bolts, dowels, or pins.
- Rapidly seal cracks and set ports prior to injection.
- Mix with sand to create a repair mortar.
- Pick-proof sealant for jails/prisons and kennels.
- Coverage
For anchoring, 1 neat gal yields 231in³ of epoxy. 1 gal of neat DURAL FAST SET GEL epoxy mixed with 1 gal of dry 20/40 mesh silica sand will yield approximately 368in³ of mortar
Note - Coverage rates are approximate. Actual coverage depends on temperature, texture, and substrate porosity.
- Clean Up
Clean tools and application equipment immediately with acetone, xylene, or MEK. Clean spills or drips with the same solvents while still wet. Hardened DURAL FAST SET GEL will require mechanical abrasion for removal.
Properties
- Physical Form
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Consistency | 3.2 | mm | ASTM C881 |
| Gel Time | 8.0 | minutes | ASTM C881 |
| Bond Strength (2 Days) | 2600.0 | psi | ASTM C882 |
| Bond Strength (14 Days) | 3000.0 | psi | ASTM C882 |
| Water Absorption (24h) | 0.3 | % | ASTM D570 |
| Heat Deflection Temperature | 145.0 | °F | ASTM D648 |
| Linear Coefficient of Shrinkage | 0.001 | — | ASTM D2566 |
| Compressive Yield (1h) | 15500.0 | psi | ASTM D695 |
| Compressive Yield (4h) | 4000.0 | psi | ASTM D695 |
| Compressive Yield (8h) | 6950.0 | psi | ASTM D695 |
| Compressive Yield (7 Days) | 11400.0 | psi | ASTM D695 |
| Compressive Modulus (7 Days) | 12500.0 | psi | ASTM D695 |
| Tensile Strength (7 Days) | 7250.0 | psi | ASTM D638 |
| Elongation at Break | 1.5 | % | ASTM D638 |
Regulatory & Compliance
- Specifications & Compliances
- Complies with ASTM C881 Types I and IV, Grade 3, Classes B and C
- Meets the requirements of AASHTO M 235
- Canadian MTQ
Packaging & Availability
- Packaging Type
- Packaging
- 4 gal unit, Code: TD5323104NC
- 10 gal unit, Code: TD5323110NC
- 22 oz dual cartridge (case of 12), Code: TD5323122NC
- 10 oz single cartridge (case of 24), Code: TD5323115NC
Storage & Handling
- Shelf Life
2 years in original, unopened package.