Products

DURAL 452 MV is a two-component, 100% solids, moisture insensitive, high strength epoxy adhesive and binder for numerous applications. This high modulus, medium viscosity epoxy resin is the perfect solution for bonding new, plastic concrete to existing concrete slabs and steel.

Duralprep A.C. is a three-component bonding agent and anti-corrosion coating for reinforcing steel. It is a pre-proportioned kit that contains a water-based epoxy, combined with portland cement that can be used as a bonding agent for placing fresh concrete and repairing mortars to existing concrete substrates. DURALPREP A.C. contains a corrosion inhibitor that protects reinforcement when used as an anti-corrosion coating for steel. DURALPREP A.C. has a long open time, is non-flammable, VOC compliant, and does not form a water vapor barrier after cure.

v is a two-component, 100% solids, moisture insensitive, rapid-setting epoxy adhesive and binder for numerous applications. This high modulus, low viscosity epoxy resin is the perfect solution for general bonding applications and for injecting cracks in concrete and a variety of other substrates. DURAL FAST SET LV can be used in temperatures as low as 40ºF and rising.

Dural Fast Set Gel is a two-component, 100% solids, moisture insensitive, rapid-setting epoxy adhesive and binder for numerous applications. This high modulus, structural gel is perfect for bonding applications that require a quick turnaround. DURAL FAST SET GEL can be used in temperatures as low as 40ºF and rising.

DURAL 452 LV is a two-component, 100% solids, moisture insensitive, high strength epoxy adhesive and binder for numerous applications. This high modulus, low viscosity epoxy resin is the perfect solution for general bonding applications and for injecting cracks in concrete and a variety of other substrates.

LINSEED OIL TREATMENT is a blend of boiled linseed oil and solvents. When applied in a thin coating to concrete surfaces, it protects them from winter damage due to freeze-thaw cycling and the effects of de-icing salts. Two applications of the oil compound will protect concrete and increase its resistance to winter damage.

EUCO #512 VOX EPOXY SEALER is a two-component, water-based epoxy designed to penetrate and seal concrete surfaces. It fills surface pores resulting in improved wear resistance and lower absorption of water and salts. This system is supplied as a 20% solids formulation.

Dural HS Gel Class A is a two-component, 1:1 mix ratio, a structural epoxy system that offers exceptional strength in anchoring and doweling applications and can be installed from 40°F to 110°F. DURAL HS GEL has been tested by ASTM E488 and ASTM E1512 for its ability to resist static, dynamic, seismic, and wind loads in uncracked concrete for both threaded rod and rebar.

DURAL 452 GEL is a two-component, 100% solids, DOT non-corrosive, moisture insensitive, high strength epoxy adhesive and binder for numerous applications. This high modulus, structural gel is perfect for bonding applications that require a non-sag adhesive.