Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
company tower banner
Euclid Chemical Company Logo

Dural Fast Set LV

1 of 6 products in this brand
v is a two-component, 100% solids, moisture insensitive, rapid-setting epoxy adhesive and binder for numerous applications. This high modulus, low viscosity epoxy resin is the perfect solution for general bonding applications and for injecting cracks in concrete and a variety of other substrates. DURAL FAST SET LV can be used in temperatures as low as 40ºF and rising.

Product Type: 2K (2 component) Adhesive, Epoxy Adhesive, Solvent free (100% Solids) Adhesive

Application Area: Bolts

Compatible Substrates & Surfaces: Concrete, Wood

Chemical Family: Epoxy & Epoxy Derivatives

Technical Data SheetSafety Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Family

Epoxy & Epoxy Derivatives

Product Type

2K (2 component) Adhesive,

Epoxy Adhesive,

Solvent free (100% Solids) Adhesive

Technologies

Ready-to-Use Products

Product Families

Ready-to-Use Products — Adhesives & Sealants

Contact Adhesives

Features & Benefits

Ready-to-Use Product Features

Fast Setting,

Good Adhesion,

Good Bonding Strength,

High Modulus,

Low Viscosity,

Moisture Resistant,

Wide Temperature Operating Range

Features/Benefits
  • Exceptional adhesion to construction materials
  • Low viscosity penetrates deep into cracks
  • Easy to use 1:1 mix ratio
  • Moisture insensitive
  • Tenacious bond strength

Applications & Uses

Markets

Adhesives & Sealants,

Building & Construction,

Industrial

Applications

Building & Construction — Building Materials

Construction Adhesives

Industrial — Chemical & Industrial Manufacturing

Equipment & Parts

Adhesives & Sealants — DIY & Consumer

Repair Adhesives

Application Area

Bolts

Compatible Substrates & Surfaces

Concrete,

Wood

Primary Applications
  • Bonding of concrete, masonry or wood
  • Injection resin for cracked, structural substrates
  • Gravity feed cracks in concrete slabs
  • Mix with dried silica sand to create a repair mortar
Coverage

For injection, 1 neat gal yields 231in³ of epoxy. 1 gal of neat DURAL FAST SET LV epoxy mixed with 3 gal of dry 20/40 mesh silica sand will yield approximately 643in³ of mortar.

Note - Coverage rates are approximate. Actual coverage depends on temperature, texture, and substrate porosity.

Clean Up

Clean tools and application equipment immediately with acetone, xylene, or MEK. Clean spills or drips with the same solvents while still wet. Hardened DURAL FAST SET LV will require mechanical abrasion for removal.

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Mixed Viscosity800.0cPASTM D2556
Gel Time6.0minutesASTM C881
Bond Strength (2 Days)2300.0psiASTM C882
Bond Strength (14 Days)2600.0psiASTM C882
Water Absorption (24h)0.1%ASTM D570
Heat Deflection Temperature135.0°FASTM D648
Linear Coefficient of Shrinkage0.001—ASTM D2566
Compressive Yield (1h)4000.0psiASTM D695
Compressive Yield (4h)10500.0psiASTM D695
Compressive Yield (8h)13000.0psiASTM D695
Compressive Yield (7 Days)15500.0psiASTM D695
Compressive Modulus (7 Days)575000.0psiASTM D695
Tensile Strength (7 Days)10000.0psiASTM D638
Elongation at Break1.9%ASTM D638

Regulatory & Compliance

Specifications & Compliances
  • Complies with ASTM C881 Types I and IV, Grade 1, Classes B and C
  • Meets the requirements of AASHTO M 235
  • Canadian MTQ

Packaging & Availability

Packaging Type

Cartridges

Packaging
  • 4 gal unit, Code: TD5324104
  • 10 gal unit, Code: TD5324110
  • 22 oz dual cartridge (case of 12), Code: TD5324122
  • 10 oz single cartridge (case of 24), Code: TD5324115

Storage & Handling

Shelf Life

2 years in original, unopened package.