Products

Tammolastic is a protective, decorative, flexible coating, formulated from high-performance elastomeric acrylic resins. It is designed to waterproof, bridge hairline cracks, and enhance the esthetic appearance of concrete, stucco, and masonry surfaces. TAMMOLASTIC provides long-term protection from severe weather over a wide range of temperatures, dirt, airborne pollutants, and is resistant to ultraviolet light degradation and carbon dioxide. TAMMOLASTIC has superior adhesive, cohesive, and color retention characteristics.

Eucoweld 2.0 is a liquid latex bonding agent for cement-based repair mortars and concrete. EUCOWELD 2.0 has a long open time, and repair materials can be placed either after it has dried, or while it is still wet. This bonding agent represents a new generation of easy-to-use latex, which exhibits drastically improved performance and stability in comparison to the typical re-wettable ethylene vinyl acetate (EVA) bonding agents currently available. EUCOWELD 2.0 is a unique, non-EVA-based latex that utilizes reactive chemistry for bonding, rather than depending on the moisture content of the repair material.

DURAL 452 MV is a two-component, 100% solids, moisture insensitive, high strength epoxy adhesive and binder for numerous applications. This high modulus, medium viscosity epoxy resin is the perfect solution for bonding new, plastic concrete to existing concrete slabs and steel.

Duralprep A.C. is a three-component bonding agent and anti-corrosion coating for reinforcing steel. It is a pre-proportioned kit that contains a water-based epoxy, combined with portland cement that can be used as a bonding agent for placing fresh concrete and repairing mortars to existing concrete substrates. DURALPREP A.C. contains a corrosion inhibitor that protects reinforcement when used as an anti-corrosion coating for steel. DURALPREP A.C. has a long open time, is non-flammable, VOC compliant, and does not form a water vapor barrier after cure.

Dural Fast Set Gel is a two-component, 100% solids, moisture insensitive, rapid-setting epoxy adhesive and binder for numerous applications. This high modulus, structural gel is perfect for bonding applications that require a quick turnaround. DURAL FAST SET GEL can be used in temperatures as low as 40ºF and rising.

LINSEED OIL TREATMENT is a blend of boiled linseed oil and solvents. When applied in a thin coating to concrete surfaces, it protects them from winter damage due to freeze-thaw cycling and the effects of de-icing salts. Two applications of the oil compound will protect concrete and increase its resistance to winter damage.

EucoFloor Epoxy Primer is a three-component, high-performance bonding system, consisting of two components, medium viscosity epoxy (sold by Euclid Chemical) and oven-dried, coarse silica sand (sold separately- locally sourced by end-user). The medium viscosity epoxy is mixed and applied to the prepared concrete substrate, and is then immediately broadcast/”seeded” to refusal with the oven-dried coarse silica sand. This creates an aggressive surface profile that provides unsurpassed mechanical bonding for the subsequent cementitious topping.

EUCO #512 VOX EPOXY SEALER is a two-component, water-based epoxy designed to penetrate and seal concrete surfaces. It fills surface pores resulting in improved wear resistance and lower absorption of water and salts. This system is supplied as a 20% solids formulation.

v is a two-component, 100% solids, moisture insensitive, rapid-setting epoxy adhesive and binder for numerous applications. This high modulus, low viscosity epoxy resin is the perfect solution for general bonding applications and for injecting cracks in concrete and a variety of other substrates. DURAL FAST SET LV can be used in temperatures as low as 40ºF and rising.

Aquastain HS is a water-based, acrylic stain used to protect and decorate vertical masonry and concrete surfaces.

DURAL 452 LV is a two-component, 100% solids, moisture insensitive, high strength epoxy adhesive and binder for numerous applications. This high modulus, low viscosity epoxy resin is the perfect solution for general bonding applications and for injecting cracks in concrete and a variety of other substrates.

Tammsweld is a rewettable liquid bonding agent and polymer modifier for concrete and cement mortars. TAMMSWELD is a high film build, ethylene-vinyl acetate copolymer emulsion.

Aquastain T-96 is a penetrating, non-flammable, decorative, water-based, liquid polymer stain. Aquastain T-96 retains the natural texture of the concrete or masonry surface without leaving a "painted look." It resists ultraviolet degradation, airborne dirt, smog, industrial fumes, acid rain, and most other atmospheric chemicals. AQUASTAIN T-96 is a water-based formulation based on acrylic resins, inorganic pigments, fillers, and proprietary additives.

Dural HS Gel Class A is a two-component, 1:1 mix ratio, a structural epoxy system that offers exceptional strength in anchoring and doweling applications and can be installed from 40°F to 110°F. DURAL HS GEL has been tested by ASTM E488 and ASTM E1512 for its ability to resist static, dynamic, seismic, and wind loads in uncracked concrete for both threaded rod and rebar.

DURAL 452 GEL is a two-component, 100% solids, DOT non-corrosive, moisture insensitive, high strength epoxy adhesive and binder for numerous applications. This high modulus, structural gel is perfect for bonding applications that require a non-sag adhesive.