Products

SIPERNAT® 50 S is a hydrophilic, finely milled silica. Besides its application as flow aid and highly effective anticaking agent it also may serve as carrier of especially high absorptive capacity in case particle fineness is required.

SIPERNAT® 35 is a very finely milled, hydrophilic, slightly alkaline silica, used in dry roast hydrophobized defoamer formulations.

SIPERNAT® D 10 is a milled hydrophobic (i.e., not wettable by water) silica. It is used in a great variety of defoamers due to its high effectiveness and ease of dispersion.

SIPERNAT® 22 S is a finely milled, hydrophilic silica. It is primarily used as a free-flow agent in other applications. SIPERNAT® 22 S can also be used in-situ hydrophobized in defoamers. The use of an alkaline catalyst is recommended.

SIPERNAT® 45 S is a carrier silica with high absorbency that finds typical applications in rubber and plastic additives, plant protection formulations, and feed additives. Its benefits include improved flow properties in fine particle applications, faster production rates, and increased capacity.

SIPERNAT® 22 is a hydrophilic, coarse silica combining a high absorptive capacity with a good flowability. It is well suited to transform any type of liquid, including defoamers, into dry, free flowing powder concentrates.

SIPERNAT® 50 is a hydrophilic, coarse silica with the highest absorptive capacity and a high surface area. It is capable of transforming any liquid solution, water- or oil-based systems into dry powder concentrates of up to 75%.

SIPERNAT® 28 is a very finely milled, hydrophilic silica. It is primarily used as a thickening or free-flow agent in other applications.

SIPERNAT® 380 is an ultra-fine particle size precipitated silica with applicability in many markets. Its particle size and distribution are based on a unique process that results in a variety of effects. SIPERNAT® 380 provides excellent free flow and anti-caking properties in powdered foods.

SIPERNAT® 45 is a high-absorbency carrier silica that is capable of converting liquid active substances or solutions into powders. It has the ability to produce concentrates with up to 75% concentration. This carrier silica finds typical applications in rubber and plastic additives, plant protection formulations, and feed additives.

ZEOFREE® 80 is a finely milled, hydrophilic silica. It is primarily used as a free-flow agent in other applications. ZEOFREE® 80 can also be used in-situ hydrophobized in defoamers. The use of an alkaline catalyst is recommended.

SIPERNAT® 22 LS is a very finely milled, hydrophilic silica. It is primarily used as a free-flow agent in other applications.

SIPERNAT® 823 is a finely milled, hydrophilic sodium aluminum silicate. It is primarily used as a free-flow agent in other applications.

SIPERNAT® 26 is a very finely milled, hydrophilic silica. It is primarily used as a free-flow agent in other applications. SIPERNAT® 26 can also be used in-situ hydrophobized in defoamers. The use of an alkaline catalyst is recommended.

SIPERNAT® D 13 is a milled, hydrophobic (i.e., not wettable by water) silica, high methanol wettability and low surface. It is used in a great variety of technical defoamers due to its high effectiveness and ease of dispersion.

SIPERNAT® 340 is a medium sized silica with spherical particles and high oil absorption capacity (DBP). Is less dusty than small particle size flow agents, yet still gives good free flow improvement performance.