Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Chemical Family
- Chemical Name
- INCI Name
- Cosmetic Ingredients Functions
- CAS No.
- 112926-00-8
- EC No.
- 601-214-2
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Materials Features
Applications & Uses
- Markets
- Applications
- Compatible Polymers & Resins
- Base Chemicals End Uses
- Applications
- Well suited for In-situ-hydrophobization
- SIPERNAT® 22 LS is very often used as a thickners for liquid systems. In fine powders it reduces caking and improves flowability.
Typical Applications
- Plasticizers
- Blowing agents
- Antistatic agents
- Anti-fogging agents
Properties
- Physical Form
- Physico-Chemical Properties
Value Units Test Method / Conditions Tamped Density (Not Sieved) 70 g/l ISO 787-11 Sulfate Content¹ max. 1.5 % ISO 15350 Specific Surface Area (N₂) Multipoint 180 m²/g ISO 9277 Sodium Content¹ max. 1 % Internal Method SiO₂ Content³ min. 97 % ISO 3262-19 Sieve Residue (in 45 µm Spray) max. 300 % ISO 3262-19 pH Value (in 5% water) 6.5 - ISO 787-9 Particle Size (D50) 9 µm Laser Diffraction, ISO 13320 Loss on Ignition² (at 1000°C, 2 Hours) max. 6 % ISO 3262-1 Loss on Drying (at 105°C, 2 Hours) max. 7 % ISO 787-2 Iron Content¹ max. 400 ppm Internal Method Electrical Conductivity (in 4% water) max. 1300 µS/cm ISO 787-14 DOA Absorption¹ 235 ml/100g ISO 19246 - Note
- ¹ based on original substance
- ² based on dry substance (2 h/105°C)
- ³ based on ignited substance (2 h/1000°C)
- * The Physico-chemical properties are typical values. Specifications on request.
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
Storage & Handling
- Shelf Life
- 24 months
- Storage Conditions
Our silica products are inert and extremely stable chemically. However, due to their high specific surface area, they can absorb moisture and volatile organic compounds from the surrounding atmosphere. Therefore, we recommend storing the products in sealed containers in a dry, cool place, and removed from volatile organic substances. Even if a product is stored under these conditions, after a longer period it can still pick up ambient moisture over time, which could lead to its exceeding the specified moisture content. For this reason, our recommended use-by date is 24 months after date of manufacture. Product more than 24 months old should be tested for moisture content before use in order to make certain that it is still suitable for the intended application.