Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- Plastics & Elastomers Functions
- CAS No.
- 112926-00-8
- EC No.
- 601-214-2
Features & Benefits
- Materials Features
- Product Benefits
Easier dosing, handling, incorporation and dispersion of liquid/solid additives.
Applications & Uses
- Base Chemicals End Uses
- Applications
- Very well suited for powder defoamer production (carrier silica).
- SIPERNAT® 22 is used as carrier silica for choline chloride solutions, vitamin E acetate and other liquid active substances.
Typical Applications
- Plasticizers
- Blowing agents
- Antistatic agents
- Anti-fogging agents
Properties
- Physico-Chemical Properties
- Note
- ¹ based on original substance
- ² based on dry substance (2 h/105°C)
- ³ based on ignited substance (2 h/1000°C)
- * The Physico-chemical properties are typical values. Specifications on request.
| Value | Units | Test Method / Conditions | |
| Tamped Density (Not Sieved) | 245 | g/l | ISO 787-11 |
| Sulfate Content¹ | max. 1.5 | % | Internal Method |
| Specific Surface Area (N₂) Multipoint | 180 | m²/g | ISO 9277 |
| Sodium Content¹ | max. 1 | % | Internal Method |
| SiO₂ Content³ | min. 97 | % | ISO 3262-19 |
| Sieve Residue (in 63 µm Alpine) | min. 75 | % | ISO 8130-1 |
| pH Value (in 5% water) | 6.5 | — | ISO 787-9 |
| Particle Size (D50) | 120 | µm | Laser Diffraction, ISO 13320 |
| Loss on Ignition² (at 1000°C, 2 Hours) | max. 6 | % | ISO 3262-1 |
| Loss on Drying (at 105°C, 2 Hours) | max. 7 | % | ISO 787-2 |
| Iron Content¹ | max. 400 | ppm | Internal Method |
| Electrical Conductivity (in 4% water) | max. 1300 | µS/cm | ISO 787-14 |
| DOA Absorption¹ | 235 | ml/100g | ISO 19246 |
Regulatory & Compliance
- Chemical Inventories
Storage & Handling
- Shelf Life
- 24 months
- Storage Conditions
Our silica products are inert and extremely stable chemically. However, due to their high specific surface area, they can absorb moisture and volatile organic compounds from the surrounding atmosphere. Therefore, we recommend storing the products in sealed containers in a dry, cool place, and removed from volatile organic substances. Even if a product is stored under these conditions, after a longer period it can still pick up ambient moisture over time, which could lead to its exceeding the specified moisture content. For this reason, our recommended use-by date is 24 months after date of manufacture. Product more than 24 months old should be tested for moisture content before use in order to make certain that it is still suitable for the intended application.