Products

TEGO® Antifoam ESMK 41 is an organo-modified polysiloxane tailored for its defoaming capabilities. This product, belonging to the polysiloxane chemical family, is organomodified and is available in liquid form. Importantly, it is proudly labeled as solvent-free and is classified under CASE ingredients within the foam control additives category.

Dynasylan® DAMO is a versatile diamino-functional silane that enhances adhesion and modifies surfaces. Acting as an adhesion promoter and surface modifier, it bridges the gap between inorganic materials and organic polymers like polyamides, PBT, PVC, and more. This silane boasts features like corrosion resistance, good impact strength, and improved mechanical properties. It's your solution for cables, pipes, and beyond. Elevate your materials with Dynasylan® DAMO.

SIPERNAT® 22 S is a finely milled, hydrophilic silica. It is primarily used as a free-flow agent in other applications. SIPERNAT® 22 S can also be used in-situ hydrophobized in defoamers. The use of an alkaline catalyst is recommended.

TEGO® CYCLE CP 310 is an organo-modified siloxane that is used as a processing additive, compatibilizer, and for permanent modification of polymer properties. Its use provides several advantages for specific applications. It reduces gelling, resulting in lower failure rates, reduces pressure, increases throughput, and prevents melt fracture and shark skin effect. It also reduces surface roughness. TEGO® CYCLE CP 310 shortens cycle times, prevents cut propagation in oriented tapes and films, and improves mechanical performance, including notched impact strength and elongation at break. It also prevents stress cracking and whitening.

Evonik Polymer VS 500 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

TEGO® Surten 202 E is a non-ionic polyether siloxane with a 100% active content. This product is particularly effective for surface wetting in adhesive applications, especially on challenging substrates. It is also well-suited for curtain coating applications. One of its key advantages is that it is a solvent-free, easy-to-handle liquid.

TEGO® Antifoam KE 600 is an APEO-free organic antifoam emulsion primarily consisting of polyethers, with small quantities of organo-modified siloxanes added to boost efficiency. Dilutions of this product exhibit exceptional stability. This antifoam is specifically designed for polymerization processes and wastewater treatment, functioning as an anti-foaming agent.

TEGO® Antifoam 288 is an emulsion antifoam featuring organo-modified siloxanes, primarily functioning as an anti-foaming agent. Notably compatible, it is suitable for use in the paper and pulp industry, especially in the production of coated paper and paperboard. In addition, it finds application in pressure-sensitive adhesive formulations within the CASE ingredients category.

SIPERNAT® 45 S is a carrier silica with high absorbency that finds typical applications in rubber and plastic additives, plant protection formulations, and feed additives. Its benefits include improved flow properties in fine particle applications, faster production rates, and increased capacity.

ULTRASIL® VN 3 GR has a specific N2 surface area of approximately 180m²/g and is utilized in nearly all areas of the rubber industry. It is available in both powdered and granulated forms. ULTRASIL® VN 3 GR offers a high reinforcing potential in combination with a high level of transparency in the finished rubber product, such as in shoe soles. Furthermore, ULTRASIL® VN 3 GR is widely used in different bonding systems.

TEGO® Antifoam 50 is a highly efficient silicone-based antifoam emulsion that can be easily diluted with water. It serves as an anti-foaming agent and is suitable for managing foam in a range of industrial applications. Classified under industrial additives, this product falls within the category of processing aids, specifically as an other processing additive, and belongs to the silicone chemical family.

TEGO® Antifoam KS 53 is a self-emulsifying organic antifoam concentrate, free of APEOs, and based on food-grade vegetable oil It includes minor quantities of organo-modified siloxanes to enhance its efficiency. It functions as an anti-foaming agent and is well-suited for processes such as polymerization and suspension polymerization.

Evonik Polymer VS 1000 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

ULTRASIL® 880 is a precipitated silica that contains a calcium admixture and has a very low specific N2 surface area of approximately 35m²/g. When added to rubber mixtures, it provides excellent residual deformation and extrusion characteristics. ULTRASIL® 880 also enables the creation of profiles with minimal swelling and a very smooth surface. Even EPDM mixtures with extremely high filling grades (up to 200 parts per hundred of rubber) can still be processed with ease. In white mixtures, ULTRASIL® 880 can be used in partial substitution for titanium dioxide. The impact of sulfur adsorption is negligible.

TEGO® Antifoam KS 95 is a self-emulsifying organic antifoam concentrate enhanced with minor amounts of organo-siloxanes for improved efficiency. This antifoam is well-suited for industrial applications, specifically as an anti-foaming agent, and finds utility in various processes including polymerization, wastewater treatment, and suspension polymerization.

Evonik Polymer OH 2 is a polydimethyl siloxane with terminal silanol groups, serving as a fundamental component in the formulation of condensation-curing silicone elastomers. This product is offered in a range of viscosity levels, spanning from 100 to 400,000 mPas. In its physical form, it appears clear and colorless. Chemically, it is characterized as hydroxy-terminated polydimethyl siloxanes.

Dynasylan® 1505 is an amino-functional silane which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers) and as a surface modifier. This liquid product finds its use in coatings, primers, and industrial additives like foundry resins. Compatible with glass and metal substrates, it's your go-to for various applications, from abrasives manufacturing to pipes and cables. Elevate your materials with Dynasylan® 1505.

TEGOTEX® CS 8080 is a quaternary silicone for hydrophilic textile finishing. Like TEGOTEX® CS 8081, it is recommended as a substantive, high-performance softening agent with good rewetting properties for textile applications. TEGOTEX® CS 8080 provides excellent softness for non-wovens and fabrics made of natural or synthetic fibers and is also suitable for diverse preparations.

ULTRASIL® VN 2 is primarily used at high filler loadings in PCT (passenger car tire) tread compounds without any loss in processing behavior. This silica is particularly well-suited for use in combination with bifunctional organosilanes, which help to optimize wet and winter properties. Additionally, high static moduli are observed with and without additional organosilanes. This is why ULTRASIL® VN 2 is also widely used in other mechanical rubber goods. It is available in both powder and granulated silica forms.

SIPERNAT® 45 is a high-absorbency carrier silica that is capable of converting liquid active substances or solutions into powders. It has the ability to produce concentrates with up to 75% concentration. This carrier silica finds typical applications in rubber and plastic additives, plant protection formulations, and feed additives.

SIPERNAT® 50 S is a hydrophilic, finely milled silica. Besides its application as flow aid and highly effective anticaking agent it also may serve as carrier of especially high absorptive capacity in case particle fineness is required.

SITREN® SRA L 210 is a non-chloride, liquid shrinkage-reducing admixture formulated with a polyether base. It is engineered to markedly decrease drying and plastic shrinkage while also mitigating the risk of cracking in floor applications. This product is tailored for use in floor applications and is recognized for its ready-to-use features, which encompass improved workability, good permeability, and low volatile organic compound (VOC) content, making it environmentally friendly.

Evonik Polymer VS 10000 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

Evonik Polymer VS 200 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

AEROSIL® R 202 is a hydrophobic fumed silica grade, treated with a polydimethylsiloxane. This product can be used in defoamer formulations for sedimentation stabilization and due to its high hydrophobicity as defoaming component.

SIPERNAT® 22 PC is an eco-friendly solution. As a silica with particles in the range of 120 um, it is used to replace polyethylene beads in exfoliating skincare formulations such as shower gels and facial cleansers. In addition to its scrubbing effect, its sponge-like structure can also transport liquid ingredients into the cosmetic formulation. Its microbiological quality is guaranteed through regular and stringent monitoring.

Evonik Modifier 715 is another SiH-terminated polydimethyl siloxane plasticizer for addition-curing silicones. These products do not crosslink but extend the chains of vinyl-terminated silicone polymers (Polymer VS). The use of these modifiers is intended to decrease crosslinking density, resulting in softer elastomers.

AEROSIL® R 812 S is hydrophobic fumed silica grade treated with HMDS (Hexamethyldisilazane). It is even more hydrophobic than AEROSIL® R 812 and convenient for stabilizing a defoamer and well suitable as a component of foam control agents.

Dynasylan® 1401 is a bifunctional organosilane, incorporates reactive amino groups and hydrolyzable inorganic methoxysilyl groups. Its dual reactivity facilitates chemical binding to both inorganic materials (e.g., glass, metals, fillers) and organic polymers (including thermosets, thermoplastics, elastomers). This compound functions as an adhesion promoter, surface modifier, and reactant for product modification, offering a multifunctional solution.

TEGO® Antifoam 1488 is a versatile emulsion-based anti-foaming agent tailored for various applications. It effectively controls foam formation in processes like emulsion polymerization and textile sizing. With good compatibility, it finds use in diverse industrial additives, including metalworking fluids and nonwovens. This emulsion-type additive is available in drums, catering to different production scales. Its performance spans markets like adhesives and sealants, fluids and lubricants, and building materials. TEGO® Antifoam 1488's role in polymer dispersions manufacturing adds to its versatility and value.

AEROSIL® R 805 is a high thickening fumed silica surface treated with OCTMO.

TEGO® Antifoam MR 1015 is a highly efficient 70% active antifoam concentrate that is based on modified siloxanes. Its unique formulation and modification of the active material provide excellent efficiency and maximum compatibility, making it a superior product compared to traditional silicone oil-based antifoams. TEGO® Antifoam MR 1015 eliminates undesirable effects such as silicone spotting and fish eyes in most applications. It is highly stable in alkaline and electrolyte environments, even at higher temperatures. Additionally, TEGO® Antifoam MR 1015 is easily dispersible in water, making it easy to handle. It is an ideal antifoam concentrate for a wide range of applications where maximum compatibility and excellent efficiency are required.

TEGO® Surten 219 E surfactant is 100% active Gemini wetting agent technology for use in a wide range of aqueous applications. TEGO® Surten 219 E surfactant shows excellent dynamic surface tension reduction with low foam tendency. TEGO® Surten 219 E surfactant is easy-to handle liquid that contains no added alkylphenol ethoxylates (APEs).

Evonik Crosslinker 120, part of the Crosslinker 100 series, consists of polydimethylsiloxanes containing SiH groups within the polymer chain. In addition to SiH groups within the chain, the Crosslinker 100 series features terminal SiH groups. These crosslinkers are essential components of polyaddition silicones. When working with two-component silicone formulations, it is crucial to maintain strict separation between Pt catalysts (e.g., Catalyst 500 series) and SiH crosslinkers to ensure proper performance.

Dynasylan® GLYMO is a bifunctional organosilane, featuring a reactive organic epoxide and hydrolyzable inorganic methoxysilyl groups. This dual reactivity empowers Dynasylan® GLYMO to chemically bond with both inorganic materials (e.g., glass, metals, fillers) and organic polymers (such as thermosets, thermoplastics, elastomers). It functions as an adhesion promoter, crosslinking agent, and surface modifier.

AROSURF® PA 935 is a hydrophilic polyether siloxane emulsion with a high molecular weight. It is designed to provide special surface lubrication effects on facial and bathroom tissue during converting. AROSURF® PA 935 is recommended as a formulation aid for converting lotions. This non-ionic, non-substantive siloxane surfactant dilution is based on synthetic raw materials and does not contain any flammable solvents. It achieves a unique silicone surface feel on tissue without affecting the sheet's tensile strength. AROSURF® PA 935 is suitable for tissue made of virgin and/or recycled fibers and enhances the tissue's water absorbency properties due to its high hydrophilicity. It is compatible with other chemicals and can be easily diluted to form lower viscosity emulsions using demineralized water while avoiding the presence of electrolytes and water hardness.