Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
company tower banner
Firetect Company Logo

Firetect® FR-10

1 of 4 products in this brand
Firetect® FR-10 is an interior clear, Class B, semi-gloss latex-based flame-retardant coating for use over raw wood. FR-10 can be used in conjunction with Firetect WT-102, Class A, intumescent latex flame-retardant paint for additional flame-retardant gloss and properties.

Product Type: Intumescent Coating

Features: Flame Retardant, Medium Gloss

Compatible Substrates & Surfaces: Wood

Application Method: Brush, Roller, Spray

Technical Data SheetSafety Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Product Type

Intumescent Coating

Technologies

Ready-to-Use Products

Product Families

Ready-to-Use Products — Paints & Coatings

Protective Coatings

Features & Benefits

Ready-to-Use Product Features

Flame Retardant,

Medium Gloss

Product Highlights
  • FR-10 will look white upon application and dry clear.
  • Sheen can vary depending of type of wood it is applied to. Test on small area prior to proceeding.

Applications & Uses

Markets

Paints & Coatings

Applications

Paints & Coatings — Building & Construction

Wood Coatings & Finishes

Application Method

Brush,

Roller,

Spray

Compatible Substrates & Surfaces

Wood

Dosage

One gallon covers 200 square feet in one coat.

Application Instructions

Before using, the user must determine the suitability of this product for its intended use.

  • Prepare substrate by sanding and removing any dirt, silicone, oil or other coatings. Apply FR-10 to raw wood. FR-10 will not adhere to a surface that has not been properly prepared. If other coatings are used with FR-10, they should be tested in a lab as a system to determine the flame-spread rating. Certain stains may need several weeks to dry/cure completely before the application of FR-10.
  • OSHA recommends Applicator must wear paint goggles, masks, and gloves suitable for latex coatings.
  • FR-10 must be mixed well (do not dilute or cut with water, the product is ready to use).
  • FR-10 may be applied by brush, roller, or an airless sprayer using a 15 spray tip (do not use a cup gun or air sprayer).
  • Coverage is 1 gallon per 200 square feet.
  • Cover the entire exposed area.
  • Application in cold weather will extend dry time.

Certification for the State of California requires application by a California State Certified Applicator to comply with requirements of the California State Fire Marshal.

Clean Up

FR-10 can be cleaned up with soap and water.

Properties

Color

Transparent

Typical Properties
ValueUnitsTest Method / Conditions
Weight (5gal Pails)60.0lbs-

Regulatory & Compliance

Approvals

California State Fire Marshal #C-10003, NYC COA #5865, ASTM e84, UL 723, NFPA 255, Class B, ASTM G 154-06, Previously Approved by ICBO, Los Angeles Research Report #24303.

Safety & Health

Caution

Keep out of reach of children. Do not ingest. Call physician if swallowed. Clean all contacted areas with soap and water.

Packaging & Availability

Packaging Type

Pails

Storage & Handling

Shelf Life

One year if the container is unopened and stored properly.

Storage

Do not allow to freeze. Store between 40ºF - 80ºF.

Precautions

Once the container is opened, FR-10 should be used completely or stored to prevent air exposure • Once applied and dried, do not use harsh detergents on the surface

Shipping Information

Products shipped in boxes via FedEx 1 day, FedEx 2 day, FedEx Ground, or by courier, depending on destination. Shipping costs and taxes will be calculated at checkout.

  • 1 gallon
    • Dimensions: 7”x7”x12”
    • Weight: 12lbs
  • 5 gallon pail
    • Dimensions: 13”x13”x15.5”
    • Weight: 60lbs