Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features
- Single Component
- Flexible
- Excellent Part Adhesion
- Good Coverage
- Quick Drying
- Outstanding Release Qualities
Applications & Uses
- Markets
- Application
Thoroughly mix BC 575 taking care to not enter air into the product. Mold surface and ambient temperature should be 60 - 150 Deg F. Mold should have adequate release agent.
Method: Spray apply with conventional pressure pot, airless or cap gun.
Dry Time @ 77 Deg. F: Approximately 5 minutes
Cleanup: MEK or other ketone type solvent.
Properties
- Specifications
| Value | Units | Test Method / Conditions | |
| Viscosity (77°F) | 50.0 | cps | - |
| Density #/gal | 8.60 - 8.80 | - | - |
| Solids by Weight | 0.21 | - | - |
| Theoretical Coverage | 180 mil sq. ft./gallon | - | - |
| Recommended Thickness | 1 to 2 | mils | - |
| Number of Coats | 1 or 2 | - | - |
| Flash Point | 21.0 | °F | - |
| DOT (Red Diamond UN1139) | Flammable Liquid | - | - |
Storage & Handling
- Storage and Shelf Life
Systems should be stored unopened in air tight containers at 60 - 90 degrees F. Partially emptied containers should be swept free of atmospheric moisture with dry nitrogen before sealing.
6 Months at 75 Deg F in Sealed Container