Products

URS 1560 is a clear, one-component, non-yellowing urethane coating that can be applied directly to surfaces as a sealer / surfacer in single or multiple coat applications. URS 1560 is recommended for applications requiring high abrasion and chemical resistance, such as floor and deck coating, masonry sealer, and so on.

URS 4175 is a high modulus, medium viscosity polyether-based structural spray urethane system with good rigidity and excellent impact resistance at a 1 to 1 by volume mix ratio. URS 4175 is recommended for applications requiring stiffness and impact resistance in a quick set spray system, such as artificial rock formations, ceiling panels, spa walls, foam backing, Styrofoam coatings, and so on.

PRIMER 1002 is a single-coat primer for bonding castable and millable urethane elastomers to exotic metals when used in conjunction with ADH 1001.

The URS 7600 series is an aliphatic, two-component, non-yellowing urethane coating system that can be applied directly to surfaces as a sealer / surfacer in single or multiple coat applications. URS 7600 is recommended for applications requiring extreme ultraviolet, outdoor weather, chemical, and water resistance.

BC 575 is a single component package, elastomer coating designed to be applied directly to mold surfaces as an in-mold coating (IMC) for part enhancement and mold protection in single or multiple coat applications. BC 575 is also recommended for in-mold applications that require rapid release and mold protection from high temperature exotherms. Because of its excellent color stability, BC 575 is ideal for concealing the extremely rapid yellowing characteristics of low-cost polymer systems used in the production of molded goods.

ADH 1001 is a one-coat adhesive designed to bond castable and millable urethane elastomers to metals and other rigid substrates. Water, salt spray, many solvents, and other environmental conditions are not a problem for ADH 1001 bonds.

URS 4495 is a low viscosity, polyether-based elastomeric spray system with good durability and excellent chemical resistance at a 1 to 1 by volume mix ratio. URS4495 is recommended for applications requiring flexibility, rigidity, and abrasion resistance in a quick set spray system using low pressure equipment, such as chute liners, truck beds, hopper bins, and Styrofoam coating.

ADH 1020 is a one-coat primer and adhesive that can be used to bond elastomers to cured urethane or vulcanized rubber. Water, salt spray, many solvents, and other environmental conditions do not affect bonds.

PRIMER 1050 is a one-coat primer designed to bond castable, sprayable, and millable urethane elastomers to nonmetallic substrates such as urethane foam, concrete, and various polymers.

REL 99 is a silicon-based liquid release agent in a single component package that is designed to be applied directly to mold surfaces in single or multiple coat applications, allowing for quick and easy release of molded articles while maintaining mold protection. REL 99 is also recommended for in-mold applications where color stability and high temperature exotherm protection are required.