Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
- Composition
A mixture of organic polymers and resins dissolved in an organic solvent system.
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Application Method
- Surface Preparation
To ensure consistent bonding results, surfaces must be thoroughly cleaned prior to application of the adhesive. Protective oils, cutting oils, greases, etc. are removed by solvent degreasing. Scale or tightly adherent coatings are removed by suitable mechanical or chemical cleaning methods.
- Application
PRIMER 1050 may be applied to the cleaned substrate by brushing, dipping, spraying, roller coating, or any other method that gives uniform coating and avoids excessive runs or tears.
Proper dilution for the various application methods is best achieved by experience. PRIMER 1050 is normally used full strength for brush, dip and roller application. For spray application, dilution of 50 to 100 percent by volume is suggested using (1) a 1:1 solvent blend (by volume) of toluene, or (2) glycol ether type solvents. The dry film thickness should be in the range of 0.5 to 1 mil for best results. PRIMER 1050 dries to a clear, soft, non-tacky film in a short time, but at least 30 minutes drying at 77 Deg F should be allowed for complete solvent evaporation prior to the bonding operation.
Properties
- Soluble in
- Toluene, isopropanol, ethanol, MEK
- Specifications
- Diluents
Toluene, glycol ether solvents, MEK
- Note
* Data is typical and not to be used for specification purposes.
| Value | Units | Test Method / Conditions | |
| Viscosity (77°F) | 750 - 1050 | cps | — |
| Nonvolatile Content Weight | 60 - 65 | % | — |
| Coverage * (One Dry Mil) | 265.0 | sq. ft./gallon | — |
| Weight/Gallon | 7.9 - 8.3 | lbs. | — |
| Flash Point (Pensky-Martens Closed Cup) | 36.0 | °F | — |
Storage & Handling
- Shelf Life
Shelf Life from date of shipment, unopened container, 70 - 80 Deg F storage: 6 Months