Company logo

Products

Gellner
Building & Construction
Applications
Building Envelope & Roofing
Decorative Materials & Finishes
Infrastructure, Roads & Paving
4 products found on Gellner in Building & Construction .
With SDS
With TDS
Wonderwet™ Iv product card banner

Gellner

WONDERWET™ IV

Chemical Family: Acrylics & Acrylates

End Uses: Waterborne Coating, Stains

Features: Good Leveling, Good Gloss Retention, Excellent Freeze/Thaw Stability, UV Resistance, Long Open Time, Excellent Flow

WONDERWET™ IV is a water-soluble acrylic polymer resin designed to retard the drying rate of any water-based paint, printing ink, or adhesive. It is particularly effective in improving the wet edge or open time of low- and zero-VOC flat and non-flat paints and coatings when glycols and other solvents have been replaced or reduced. This product will improve the flow, leveling, and appearance of a given paint.

Ottopol Cs-58 product card banner

Gellner

Ottopol CS-58

Chemical Family: Acrylics & Acrylates

Glass Transition Temperature (Tg): 12.0 - 12.0 °C

Ottopol CS-58 is an anionic acrylic emulsion that is used as a binder for house paints and pigment dispersions.

Ottopol 1320 product card banner

Gellner

Ottopol 1320

Chemical Family: Acrylics & Acrylates

End Uses: Sealer

Compatible Substrates & Surfaces: Terrazzo, Concrete, Masonry, Tile

Glass Transition Temperature (Tg): 18.0 - 18.0 °C

Features: Good Toughness, Abrasion Resistance, Chemical Resistance, Reduced Wear, Alkali Resistance, UV Resistance

Ottopol 1320 is a medium-hard, tough, all-anionic acrylic emulsion with outstanding chemical, abrasion, and wear resistance. The built-in crosslinker provides chemical resistance properties approaching PUD performance. It is also alkali-tolerant and retards the efflorescence of terrazzo and masonry. This product can be used in traffic paint and other exterior applications.

Ottopol 151 product card banner

Gellner

Ottopol 151

Chemical Family: Acrylics & Acrylates

Compatible Substrates & Surfaces: Elastomers & Rubbers

Glass Transition Temperature (Tg): 25.0 - 25.0 °C

Features: Water Resistance

Ottopol 151 is an anionic acrylic emulsion with a low glass transition temperature of -25°C. It showed excellent water resistance after a 4 hour ambient cure of a wet, 25 mil thick film. This product is mainly used for elastomeric roof coatings.