Gellner

WONDERWET™ IV is a water-soluble acrylic polymer resin designed to retard the drying rate of any water-based paint, printing ink, or adhesive. It is particularly effective in improving the wet edge or open time of low- and zero-VOC flat and non-flat paints and coatings when glycols and other solvents have been replaced or reduced. This product will improve the flow, leveling, and appearance of a given paint.

Ottopol SX-30 is a self-crosslinking acrylic emulsion for flexo or gravure printed films. This translucent emulsion polymer exhibits resistance to alkalis and solvents, such as diluted alcohol solutions. It has excellent adhesion to substrates and provides excellent resolubility properties when applied.

Ottopol K-633 is a low-molecular-weight cationic acrylic resin solution. It provides alkali resistance and adhesion to non-porous substrates with improved solubility. This product is suitable for use as a grinding vehicle for organic and inorganic pigments. Pigment concentrates can be let down with these resins to produce printing inks and coatings.

Ottopol 1320 is a medium-hard, tough, all-anionic acrylic emulsion with outstanding chemical, abrasion, and wear resistance. The built-in crosslinker provides chemical resistance properties approaching PUD performance. It is also alkali-tolerant and retards the efflorescence of terrazzo and masonry. This product can be used in traffic paint and other exterior applications.

Ottopol 1960 is an anionic acrylic emulsion used as a high-solids binder. It exhibits excellent adhesion to metal, plastic, and masonry substrates and provides built-in flash rust protection. This product is suitable for high-performance sealants, patching compounds, contact adhesives, and coating formulations.

Ottopol S-75 is a film-forming acrylic emulsion polymer that is suitable for inks and coatings on paper and board. This product has good adhesion to vinyl and other non-porous substrates that require a hard film. It also provides excellent resolubility properties, a high-gloss finish, and non-curling properties.

Ottopol CS-58 is an anionic acrylic emulsion that is used as a binder for house paints and pigment dispersions.

Ottopol SX-50 is a self-crosslinking acrylic emulsion with good adhesion to non-porous surfaces. This product has alkali resistance and exceptionally good adhesion to plastic films, foils, and other metallic surfaces. Due to the internal cross-linking mechanism, it also has improved block and scuff resistance.

Ottopol KX-101 is a hydroxyl-functional cationic acrylic solution polymer that crosslinks with polyisocyanates and epoxy silanes at room temperature. With the combination of polyisocyanate and epoxy silane, the fastest and most resistant coating can be formulated. We recommend a maximum of 11.5% epoxy silane and 11.5% polyisocyanate based on solids. This product undergoes ambient curing very quickly, and in 15 minutes the film will have water resistance. Allowing the film to cure for four hours will result in a film that has over 100 double rubs of acetone resistance. Detergents and cleaners will not remove this film, and the final dried film resists staining.