Products

Genesee Polymers' GP-670 SILICONE RESIN SOLUTION is an Ethyl Alcohol -based solution of Methyl Silicone Resin. The resin forms a solid release coating when GP-670 SILICONE RESIN SOLUTION is applied to substrates and solvent is allowed to evaporate. Film formation occurs at room temperature and results in a durable, weather resistant, non-stick surface after solvent evaporation, which normally occurs within a few minutes.Best performance is attained when GP-670 is applied to substrates by spraying, making sure that a wet continuous film covers the substrate, followed by allowing the carrier solvent to evaporate. Some additional improvement in durability will occur, in mold release applications when the treated mold is heated to 80 -100C, for one hour prior to beginning molding operation.GP-670 SILICONE RESIN SOLUTION is suggested for use in a variety of applications, including masonry water repellents, leather and fabric treating agents, mold release formulations and as a binder for high temperature application paints and coatings

Genesee Polymers' GP-187 SILICONE RESIN SOLUTION is an Isopropyl Alcohol -based solution of Methyl Silicone Resin. The resin cures to a soft, pliable consistency when GP-187SILICONE RESIN SOLUTION is applied to substrates and solvent is allowed to evaporate. Heating at elevated temperatures (100C or higher) accelerates curing reactions, yielding a clear, hard resin film.GP-187 SILICONE RESIN SOLUTION is suggested for use in a variety of applications, including masonry water repellents, leather and fabric treating agents, mold release formulations and as a binder for high temperature application paints and coatings.

Genesee Polymers' GP-422 SILICONE RESIN SOLUTION is a concentrated mixture of a reactive, further curable silicone resin in an octamethylcyclotetrasiloxane carrier. GP-422 forms a continuous solid resin film, when applied to substrates and allowed to air dry. Curing to a solvent resistant coating takes place over a prolonged time period at room temperature, but may be accelerated by heating at 200°C for one hour.GP-422 is suggested for use as a binder in coatings intended for application to substrates exposed to high temperatures, and as a component of masonry water-repellent formulations.

Genesee Polymers' GP-179 SILICONE RESIN is a 100% active ethoxy-functional methyl silicone resin, which is suggested for evaluation, as a reactive intermediate, in the synthesis of silicone-organic copolymers for protective coatings.GP-179 will slowly undergo hydrolysis and condensation to a cured resin film when exposed to atmospheric moisture, providing a water repellent protective coating for wood, masonry and metal substrates.When required, GP-179 SILICONE RESIN may be diluted with aliphatic or aromatic hydrocarbon solvents, or with dry alcohols, esters or other solvents.