Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Application Method
- Cure Method
- Suggested Uses
GLYPTAL 1209 is suggested for the finishing of electrical equipment for interior exposure. It is similar to 1201 in properties other than dielectric strength and may be used for coating small motor stators, field coils, end windings, bus bars, and switch bases. It is also suggested for the protection of surfaces from arcing.
- Applications
GLYPTAL 1209 may be applied by spray or dip methods. Surfaces to be painted should be clean and dry.
Reduction: 1209 should be thinned to 23 to 28 seconds (#2 Zahn Cup) with 1500 thinner- Surface Preprations
Surfaces to be painted should be dry and free from dirt, wax, grease, rust, and oil. Remove grease and oil by washing surface with mineral spirits. When painting over a previously glossed surface, reduce gloss by use of sandpaper or steel wool.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Dielectric Strength | average. 1000 | V/mil | ASTM D115-55 |
Solids by Weight | average. 62 | % | — |
Air Dry Time | 4.0 | hours | — |
Recoat | Overnight | — | — |
Flash Point | 69.0 | °F | — |
Bake Time (200-250°F) | ½-1 | hours | — |
Bake Time (150-200°F) | 2021-01-02 | hours | — |
Gloss | High | — | — |
Coverage (1 mil dried film) | approx. 550 | ft.2/gal | — |
Arc Resistance on Textolite (96 hours air dry) | 75.0 | seconds | — |