Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Markets
- Application Method
- Cure Method
- Suggested Uses
Glyptal 8001 is suggested for coating motor stators, field coils, end windings, bus bars, and switch bases. It adheres well to molded phenolics and phenolic varnish films. This paint can also be used as a metal primer where some degree of corrosion resistance is needed.
- Applications
Glyptal 8001 Red Enamel is designed for use by spray, dip, or flow coat. For best results apply on clean, dry surfaces at temperatures above 50 ºF.
- Reduction: Spray- Reduce with 1500 Thinner to a viscosity of 24-28 seconds (#2 Zahn Cup)
- Dip or Flow- Reduce with Aromatic 100 to a viscosity of 30-35 seconds (#2 Zahn Cup)
- Surface Preprations
Surface to be painted should be dry and free from dirt, wax, grease, rust, and oil. Remove all grease and oil by washing surface with mineral spirits.
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Coverage (1 mil dried film) | 650.0 | ft.2/gal | — |
Solids by Weight | 56-59 | % | — |
Viscosity | 80-85 KU | — | — |
Flash Point | max. 80 | cc/pm | — |
Dielectric Strength | average. 1800 | V/mil | ASTM D115-55 |
Arc Resistance on Textolite | 30.0 | seconds | — |
Solid Weight | 13.76 ± 0.2 | lb/gal | — |
Hard Air Dry Time (to touch 4-6 hours) | Overnight | — | — |
Recoat Air Dry Time (to touch 4-6 hours) | Overnight | — | — |
Bake Schedule (225-275°F) | 2021-01-03 | hours | — |
Safety & Health
- Hazards
Keep away from heat, sparks, and open flame. Avoid prolonged contact with skin and breathing of vapor or spray mist. Close container after each use. Use adequate ventilation.